Opens in a new tab

TPS60403QDBVRQ1

Automotive 60mA charge-pump inverter, 1.6-5.5V to -Vout, 20kHz, SOT-23-6

7120

Effective Inventory

Image for reference only

Manufacturer Part:

TPS60403QDBVRQ1

Package:

SOT-23-6 (2.9 × 1.6 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS60403QDBVRQ1 is an automotive-grade 60mA charge-pump voltage inverter from Texas Instruments, packaged in a 6-pin SOT-23 (DBV) package. It converts a positive 1.6V to 5.5V input voltage to a corresponding negative output, requiring only three small external capacitors. The Q1 designation indicates AEC-Q100 qualification for automotive applications.

Key Specifications

Function 60mA Charge-Pump Voltage Inverter
Input Voltage 1.6V to 5.5V
Output Voltage -VIN (inverted)
Output Current 60mA
Switching Frequency 20kHz
Efficiency Up to 95%
External Components 3 capacitors only
Package 6-pin SOT-23 (2.9 × 1.6 mm)
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • Automotive AEC-Q100 qualified
  • Converts positive voltage to negative without inductor
  • Only 3 external capacitors required — no inductor
  • 20kHz low-noise fixed switching frequency
  • Up to 95% efficiency at 60mA load
  • SOT-23-6 compact footprint

Applications

  • Automotive LCD display negative bias generation
  • Op-amp negative rail generation in automotive systems
  • Double-ended sensor supply from single supply
  • Automotive audio circuit negative rail
  • Portable equipment negative voltage generation
Product Introduction: TPS60403QDBVRQ1 Product Introduction

The TPS60403-Q1 is an automotive-qualified 60mA charge-pump voltage inverter from Texas Instruments. It generates a negative output voltage from a positive input supply using an inverted charge-pump (flying capacitor) topology, requiring no inductors and only three external capacitors. The device operates from 1.6V to 5.5V input and provides up to 60mA output current. The 20kHz fixed switching frequency minimizes output ripple and EMI. AEC-Q100 qualification makes it suitable for automotive applications such as LCD bias generation, negative op-amp rails, and double-ended sensor supplies.

Working Principle: TPS60403QDBVRQ1 Working Principle

The TPS60403-Q1 uses a switched-capacitor (flying capacitor) voltage inverter topology. During the charge phase, the flying capacitor (CFLY) is connected between VIN and GND, charging to approximately VIN. During the discharge phase, the capacitor is reconnected with its positive terminal to GND and its negative terminal to the output (COUT). This effectively inverts the voltage, making the output approximately -VIN minus the voltage drops across the internal switches. The charge/discharge cycles occur at 20kHz, and the output regulation is achieved by the load and the inherent output impedance of the charge pump. The output voltage is unregulated (follows -VIN with load-dependent droop), which is suitable for applications that can tolerate moderate output voltage variation.

Pin Description: TPS60403QDBVRQ1 Pin Definition and Functions
Pin Name Type Function
1 OUT Output Negative output voltage (-VIN approx)
2 IN Power Input supply voltage (1.6-5.5V)
3 CFLY+ I/O Flying capacitor positive terminal
4 CFLY- I/O Flying capacitor negative terminal
5 GND Power Ground
6 NC — No connect
Application Scenarios: In which products and applications is TPS60403QDBVRQ1 used
  • Automotive LCD TFT bias supply (-5V from 5V input)
  • Negative rail for dual-supply op-amps in car audio
  • Double-ended (±2.5V) supply from single 5V rail for sensors
  • Automotive body control module analog front-end supply
  • Portable test instrument negative rail generation
Alternative Models: What chips are recommended as replacements for TPS60403QDBVRQ1
Manufacturer Part Number Package Notes
TI TPS60400DBVR SOT-23-5 Non-automotive, 20kHz version
TI TPS60401DBVR SOT-23-5 50kHz version, smaller caps
ADI ADM660 SOIC-8 Charge pump inverter, 50mA
Maxim MAX889T SOT-23-6 Charge pump inverter, 200mA
Richtek RT9361 SOT-23-6 Charge pump inverter, 50mA

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1