Opens in a new tab

Home » Integrated Circuits ICs » TPS61088RHLR

TPS61088RHLR

10A synchronous boost converter, 2.7-12V input, 4.5-12.6V output, 91% eff, VQFN-20, TI

8500

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61088RHLR

Package:

VQFN-20 (RHL) 4.5×3.5mm with thermal pad

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Texas Instruments TPS61088RHLR is a fully integrated synchronous boost (step-up) converter with 10A switch current capability. It features an 11mΩ power switch and 13mΩ rectifier switch for high efficiency up to 91%. With a wide input range of 2.7V to 12V and adjustable output up to 12.6V, it is ideal for battery-powered portable systems. The 20-pin VQFN package measures only 4.5×3.5mm.

Key Specifications

Topology Synchronous Boost (Step-Up)
Input Voltage Range 2.7V to 12V
Output Voltage Range 4.5V to 12.6V (adjustable)
Switch Current Limit 10A (typ), 11.9A (max)
High-Side RDS(ON) 13 mΩ (rectifier switch)
Low-Side RDS(ON) 11 mΩ (power switch)
Switching Frequency 200 kHz to 2.2 MHz (programmable)
Control Mode Adaptive constant off-time peak current mode
Quiescent Current 110 µA (typ)
Shutdown Current 1.0 µA
Max Efficiency 91% (VIN=3.3V, VOUT=9V, IOUT=3A)
OVP Threshold 13.2V
Operating Temperature -40°C to +125°C (junction)
Package VQFN-20 (RHL), 4.5×3.5mm

Features

  • Fully integrated 10A synchronous boost converter — no external Schottky diode required
  • Ultra-low RDS(ON) switches (11mΩ/13mΩ) for high efficiency
  • Programmable switching frequency: 200kHz to 2.2MHz via external resistor
  • Mode selection: PFM (high efficiency at light load) or forced PWM
  • Programmable soft start via external capacitor
  • Adjustable switch peak current limit via external resistor
  • Output overvoltage protection at 13.2V
  • Cycle-by-cycle overcurrent protection
  • Thermal shutdown protection
  • 1µA shutdown current for battery conservation

Applications

  • Quick charge power banks
  • Bluetooth speakers and portable audio
  • Portable POS terminals
  • E-cigarettes
  • Thunderbolt/USB-C interface power
  • Single-cell/two-cell Li-ion battery systems
Product Introduction: TPS61088RHLR Product Introduction

The Texas Instruments TPS61088RHLR is a high-power-density, fully-integrated synchronous boost converter with 10A switch current capability. It features an 11mΩ power switch and 13mΩ rectifier switch for up to 91% efficiency. The wide 2.7V-12V input range supports single-cell or two-cell Li-ion batteries, while the adjustable output (4.5V-12.6V) covers common voltage rails. The adaptive constant off-time peak current control topology provides stable operation. Switching frequency is programmable from 200kHz to 2.2MHz via an external resistor, enabling optimization for efficiency or solution size. The device offers PFM/PWM mode selection, programmable soft start, adjustable current limit, and comprehensive protection (OVP, OCP, TSD).

Working Principle: TPS61088RHLR Working Principle

The TPS61088 uses adaptive constant off-time peak current mode control: (1) The output voltage is sensed through the FB pin via a resistor divider and compared to the 1.0V internal reference by the error amplifier; (2) The error amplifier output sets the peak current threshold; (3) During the on-time, the low-side switch (11mΩ) conducts, building current through the inductor. When the peak current reaches the threshold, the switch turns off; (4) During the off-time, the high-side rectifier switch (13mΩ) conducts, transferring stored energy to the output. The off-time is adaptively adjusted based on VIN/VOUT ratio to maintain the programmed switching frequency; (5) The BOOT capacitor provides the floating supply for the high-side gate driver. In PFM mode, the device skips pulses at light load to reduce switching losses. The internal LDO (VCC pin, 1µF minimum cap) powers the control circuitry.

Pin Description: TPS61088RHLR Pin Definition and Functions
Application Scenarios: In which products and applications is TPS61088RHLR used
Alternative Models: What chips are recommended as replacements for TPS61088RHLR

TPS61089 (similar, different current rating); LM2733 (TI, non-synchronous, lower current); MP3425 (MPS, 5A boost); SX1308 (Silergy, 4A boost, lower cost); BQ25890 (TI, integrated charger+boost)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1