Opens in a new tab

TPS61093DSKR

1.6V-6V boost converter, 17V output, integrated diode + isolation FET, 1.2MHz, WSON-10 (2.5×2.5mm)

3915

Effective Inventory

Image for reference only

Manufacturer Part:

TPS61093DSKR

Package:

WSON-10 (2.5×2.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS61093DSKR from Texas Instruments is a low-input boost converter with integrated power diode and input/output isolation. Operating from 1.6V to 6V input, it boosts the output up to 17V with a 20V/1.1A internal switch FET. The 1.2MHz fixed-frequency device features overload and overvoltage protection in a tiny 2.5×2.5mm WSON-10 package.

Key Specifications

Topology Boost (Step-Up)
Input Voltage Range 1.6V ~ 6V
Output Voltage Range 1.6V ~ 17V (Adjustable)
Switch Current Limit 1.1A (peak)
Internal Switch FET 20V rating
Switching Frequency 1.2 MHz (fixed)
Integrated Power Diode Yes
Isolation FET Yes (input/output disconnect)
Efficiency Up to 88% at 15V output
Operating Temperature -40°C ~ 85°C (TA)
Package WSON-10 (2.5×2.5mm)
Part Status Active

Features

  • 1.6V minimum input voltage for dual alkaline or single Li-ion operation
  • Integrated power diode eliminates external Schottky
  • Input/output isolation FET disconnects output during shutdown
  • 20V internal switch FET with 1.1A peak current
  • 1.2MHz fixed switching frequency
  • Programmable soft start-up
  • Overload protection with isolation switch opening
  • Output overvoltage protection (OVP)
  • Thermal shutdown and undervoltage lockout (UVLO)
  • Load discharge path after IC shutdown

Applications

  • Glucose meters and portable medical devices
  • OLED display power supplies
  • 3.3V/5V to 12V boost conversion
  • Battery-powered industrial sensors
  • White LED bias supplies
Product Introduction: TPS61093DSKR Product Introduction

The TPS61093DSKR from Texas Instruments is a 1.2MHz fixed-frequency boost converter designed for high integration and reliability. The device integrates a 20V power switch FET, input/output isolation switch, and power diode in a single 2.5×2.5mm WSON package. The 1.6V minimum input voltage enables operation from two alkaline batteries, a single Li-ion cell, or regulated 3.3V/5V supplies. The output can be boosted up to 17V. A key feature is the integrated isolation FET that disconnects the output from the input during shutdown, minimizing leakage current, and opens during overload conditions to protect both the IC and the input supply. The built-in power diode eliminates the need for an external Schottky diode. Protection features include cycle-by-cycle 1.1A overcurrent protection, output overvoltage protection, thermal shutdown, and undervoltage lockout.

Working Principle: TPS61093DSKR Working Principle

The TPS61093DSKR uses a current-mode PWM boost converter architecture. When the internal NMOS switch turns on, current flows from the input through the inductor to ground, storing energy in the inductor’s magnetic field. When the switch turns off, the inductor voltage adds to the input voltage, and current flows through the integrated power diode to the output capacitor and load. The feedback pin (FB) senses the output voltage via a resistor divider and compares it to the internal reference. The error amplifier adjusts the switch duty cycle to maintain regulation. The isolation FET sits between the input and output paths, opening during shutdown or overload to prevent reverse current flow. The programmable soft start limits inrush current during startup.

Pin Description: TPS61093DSKR Pin Definition and Functions
Pin Name Type Description
1 SW O Switch node (connect to inductor)
2 SW O Switch node (connect to inductor)
3 VIN PWR Input supply (1.6V-6V)
4 VIN PWR Input supply
5 EN I Enable (active high)
6 FB I Feedback voltage input (regulates to reference)
7 COMP I/O Error amplifier compensation
8 SS I Soft start (connect capacitor to GND)
9 GND GND Ground
10 GND GND Ground (thermal pad)
Application Scenarios: In which products and applications is TPS61093DSKR used
  • OLED Displays: Boost 3.3V to 12-15V for OLED panel bias supply
  • Glucose Meters: Battery-powered boost for sensor excitation voltage
  • 3.3V to 12V: Standard boost conversion for industrial sensor transmitters
  • White LED Drive: Constant voltage boost for LED backlight strings
  • Portable Instruments: Dual alkaline battery to 5V/12V system supply
Alternative Models: What chips are recommended as replacements for TPS61093DSKR
Model Manufacturer Key Difference
TPS61093DSKT Texas Instruments Small T&R packaging variant (250 pcs)
TPS61090RSAR Texas Instruments Similar boost, no isolation FET, VQFN-10
LT1935ES6#TRPBF Analog Devices 1.2MHz boost, 1A switch, SOT-23-6
LM2733XMF Texas Instruments 1.6MHz, 1A switch, SOT-23-5, no diode
AP3012KTR-G1 Diodes Inc 1.5MHz boost, 1.5A switch, SOT-23-6

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1