Opens in a new tab

TPS72012YZUR

1.2V 300mA LDO, 85mV Dropout, 45uA Iq, DSBGA-4 (0.64×0.64mm)

3456

Effective Inventory

Image for reference only

Manufacturer Part:

TPS72012YZUR

Package:

DSBGA-4 (0.64 x 0.64 x 0.5 mm, chip-scale)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS72012YZUR from Texas Instruments is a 1.2V fixed-output, 300mA LDO regulator with 85mV dropout, 45 uA Iq, and enable pin in a DSBGA-4 chip-scale package.

Key Specifications

Type 1.2V Fixed Low-Dropout Linear Regulator
Output Voltage 1.2 V (fixed)
Output Current 300 mA
Dropout Voltage 85 mV (typical) @ 300mA
Input Voltage 1.6 V to 5.5 V
Quiescent Current 45 uA (typical)
PSRR 68 dB @ 1kHz
Output Noise 23 uVrms (10Hz-100kHz)
Enable Yes (active HIGH)
Package DSBGA-4 (0.64 x 0.64 mm)
Operating Temperature -40C to +125C

Features

  • Ultra-small 0.64 x 0.64 mm DSBGA package
  • 85 mV dropout at 300mA
  • 45 uA quiescent current
  • 68 dB PSRR at 1kHz
  • 23 uVrms ultra-low output noise
  • 1% output voltage accuracy
  • Stable with 0.47 uF ceramic output capacitor

Applications

  • FPGA core voltage regulation (1.2V)
  • Portable device power management
  • RF module power supply
  • Battery-powered precision analog
Product Introduction: TPS72012YZUR Product Introduction

The TPS72012YZUR from Texas Instruments is a 1.2V fixed-output LDO regulator in an ultra-small 0.64 x 0.64 mm DSBGA (Die-Size BGA) chip-scale package. The 85 mV typical dropout at 300mA enables efficient 1.2V regulation from a 1.5V or 1.8V supply rail. The 45 uA quiescent current is low enough for battery-powered applications while the 68 dB PSRR and 23 uVrms output noise support noise-sensitive RF and analog loads. The enable pin provides logic-controlled on/off switching with less than 1 uA shutdown current. Stability is maintained with just a 0.47 uF ceramic output capacitor. The 1% output voltage accuracy ensures tight regulation for core voltage requirements.

Working Principle: TPS72012YZUR Working Principle

The TPS72012YZUR uses a PMOS pass element in a common-source configuration with the error amplifier driving the gate. The internal bandgap reference generates a precision 0.5V reference that is compared with a divided-down version of the output voltage. The error amplifier adjusts the PMOS gate to maintain regulation. The 85 mV dropout is achieved by using a low-VGS(th) PMOS transistor that can operate with minimal headroom. The 68 dB PSRR at 1kHz comes from the high loop gain at audio frequencies. The 23 uVrms output noise is achieved through careful design of the bandgap reference and error amplifier noise contributions. The DSBGA package directly exposes the die bumps, providing the smallest possible footprint with no package parasitics between the die and PCB. The enable pin controls a bias switch that disconnects all internal circuitry in shutdown, reducing supply current to less than 1 uA.

Pin Description: TPS72012YZUR Pin Definition and Functions
Pin/Bump Name Type Function
A1 EN Input Enable (HIGH=on, LOW=off)
A2 OUT Output Regulated 1.2V output
B1 GND Ground Ground
B2 IN Input Unregulated input (1.6-5.5V)
Application Scenarios: In which products and applications is TPS72012YZUR used
  • FPGA 1.2V core rail from 1.8V I/O supply with 85mV dropout
  • BLE radio 1.2V supply with 68dB PSRR for clean RF
  • Portable sensor node 1.2V rail with 45uA quiescent current
  • Space-constrained design requiring 0.64mm x 0.64mm package
Alternative Models: What chips are recommended as replacements for TPS72012YZUR
Manufacturer Part Number Package Notes
TI TPS72018YZUR DSBGA-4 1.8V version, same family
TI TPS72001YZUR DSBGA-4 Adjustable version, same family
TI TLV70012DQNR SON-4 1.2V, 300mA, similar class
Microchip MIC5365-1.2YD5-TR SOT-23-5 1.2V, 150mA, larger package
Diodes Inc AP2112K-1.2TRG1 SOT-23-5 1.2V, 600mA, larger package

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1