Opens in a new tab

TPS72201DBVR

50mA cap-free LDO, 1.8-5.5V input, 50mV dropout, adjustable 1.22-2.5V, SOT-23-5

4929

Effective Inventory

Image for reference only

Manufacturer Part:

TPS72201DBVR

Package:

SOT-23-5 (2.9 × 2.8 × 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS72201DBVR is a low-input-voltage, capacitor-free 50 mA low-dropout linear regulator from Texas Instruments, packaged in a 5-pin SOT-23 (DBV) package. It supports input voltages from 1.8V to 5.5V with an adjustable output from 1.22V to 2.5V and a typical dropout voltage of only 50 mV at 50 mA. The device is stable with ceramic output capacitors as small as 0.1 µF, making it ideal for space-constrained portable applications.

Key Specifications

Function Cap-Free 50 mA LDO Regulator
Input Voltage 1.8V to 5.5V
Output Voltage 1.22V to 2.5V (adjustable)
Output Current 50 mA
Dropout Voltage 50 mV (typ) at 50 mA
Quiescent Current 85 µA (typ operating), < 1 µA (shutdown)
Output Accuracy ±3%
Stability Stable with 0.1 µF ceramic capacitor
Package SOT-23-5 (2.9 × 2.8 mm)
Operating Temperature -40°C to +125°C

Features

  • Capacitor-free operation — stable with 0.1 µF ceramic capacitor
  • Ultra-low dropout of 50 mV typical at 50 mA
  • Wide input voltage range from 1.8V to 5.5V
  • Adjustable output from 1.22V to 2.5V via external resistors
  • Enable pin for shutdown mode with < 1 µA current
  • Overcurrent and thermal shutdown protection

Applications

  • Portable communication devices and smartphones
  • Battery-powered instruments and meters
  • PCMCIA card power regulation
  • Low-voltage DSP and microcontroller core supply
  • Portable medical monitoring devices
Product Introduction: TPS72201DBVR Product Introduction

The TPS72201 is a low-input-voltage, capacitor-free low-dropout linear regulator designed for portable and battery-powered applications. It supports an input voltage range from 1.8V to 5.5V and provides up to 50 mA of output current with an adjustable output voltage set by an external resistor divider from 1.22V to 2.5V. The extremely low dropout voltage of 50 mV typical at full load makes it suitable for applications where the input-to-output differential is minimal. The device is stable with very small ceramic output capacitors (0.1 µF minimum), enabling compact PCB layouts in space-constrained designs.

Working Principle: TPS72201DBVR Working Principle

The TPS72201 uses a PMOS pass transistor in a voltage-follower configuration. The error amplifier compares a fraction of the output voltage (sensed through the FB pin via an external resistor divider) with the internal 1.22V bandgap reference. The amplifier output drives the gate of the PMOS pass transistor to regulate the output voltage. The low dropout voltage is achieved because the PMOS transistor operates as a variable resistor — it only requires a small VGS overdrive to pass current, unlike NMOS LDOs that need a headroom voltage for the gate drive. The enable (EN) pin controls the pass transistor gate; when EN is low, the device enters shutdown mode with less than 1 µA quiescent current. The internal current limit and thermal shutdown circuits protect the device from overload conditions.

Pin Description: TPS72201DBVR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input supply (1.8-5.5V)
2 GND Power Ground
3 EN Input Enable — active high, pull low for shutdown
4 FB Input Feedback — connect resistor divider from output
5 OUT Output Regulated output voltage
Application Scenarios: In which products and applications is TPS72201DBVR used
  • 1.8V-to-1.5V core rail regulation in ultra-low-power MCUs
  • Portable medical device sensor power with minimal dropout
  • PCMCIA and CompactFlash card 3.3V-to-2.5V regulation
  • Battery-powered meter 3.6V-to-1.8V analog supply
  • Smartphone audio codec 1.8V clean supply regulation
Alternative Models: What chips are recommended as replacements for TPS72201DBVR
Manufacturer Part Number Package Notes
TI TPS73601DBVR SOT-23-5 400mA, 5.5V, ultra-low noise
TI TLV70001DDCR SOT-23-5 200mA, 5.5V, low IQ
ADI LT1761ES5 SOT-23-5 100mA, 20V, low noise
Richtek RT9013-33GB SOT-23-5 300mA, 5.5V, LDO
Microchip MCP1824T-3302E/OT SOT-23-5 300mA, 6V, low dropout

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1