Opens in a new tab

TPS74401RGWR

3A ultra-LDO, adjustable 0.8-3.6V, 115mV dropout, prog soft-start, VQFN-20

13153

Effective Inventory

Image for reference only

Manufacturer Part:

TPS74401RGWR

Package:

VQFN-20 (5.0 x 5.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS74401RGWR from Texas Instruments is a 3.0A ultra-low-dropout (LDO) linear regulator with programmable soft-start. It features an adjustable output from 0.8V to 3.6V, 115mV dropout at 3A, and +/-1% accuracy over line, load, and temperature in a 20-pin VQFN package.

Key Specifications

Output Current 3A
Output Voltage 0.8V to 3.6V (adjustable)
Input Voltage Range 1.1V to 5.5V
Dropout Voltage 115mV (typ @ 3A)
Accuracy +/-1% over line, load, temperature
PSRR 50dB @ 100kHz
Output Noise 13uVRMS
Operating Temperature -40 to 125 C

Features

  • Programmable monotonic soft-start
  • Ultra-low dropout of 115mV at 3A
  • +/-1% accuracy over all conditions
  • Cap-free or ceramic output capacitor stability
  • Power-good output (open drain)
  • Enable input for power sequencing
  • Current limit and thermal shutdown
  • Bias input for low VIN operation down to 0.9V

Applications

  • FPGA core and I/O voltage regulation
  • DSP and ASIC power supplies
  • Post-regulation for DC/DC converters
  • Hot-swap and inrush current control
  • Telecom and networking equipment
Product Introduction: TPS74401RGWR Product Introduction

The TPS74401RGWR from Texas Instruments is a 3.0A ultra-low-dropout linear regulator with programmable soft-start, designed for powering FPGAs, DSPs, and ASICs with stringent startup requirements. The device features an adjustable output voltage from 0.8V to 3.6V with +/-1% accuracy across line, load, and temperature. The ultra-low dropout voltage of 115mV at 3A enables efficient operation even with small input-to-output voltage differences. A key feature is the programmable, monotonic soft-start that eliminates power-up initialization problems by controlling the output voltage ramp, reducing inrush current, and minimizing input bus transients. The device is stable with any output capacitor type or value, including capacitor-free operation. An enable input and power-good output facilitate power sequencing. With a BIAS input, the device can support input voltages as low as 0.9V. The TPS74401RGWR is available in a 20-pin VQFN package rated for -40 to 125 C operation.

Working Principle: TPS74401RGWR Working Principle

The TPS74401RGWR operates as a high-current LDO with advanced control features. Key subsystems include: (1) Error Amplifier – compares the feedback voltage with a precision 0.8V reference and drives the pass element to maintain regulation; (2) NMOS Pass Element – an N-channel MOSFET provides low dropout operation with fast transient response; (3) Soft-Start Control – an external capacitor on the SS pin programs the output voltage ramp rate; the error amplifier tracks the soft-start ramp until it exceeds the internal reference, ensuring monotonic startup; (4) Bias Regulator – a separate BIAS input powers the internal circuitry, allowing VIN to go as low as 0.9V while maintaining regulation; (5) Protection Circuitry – includes current limiting with foldback, thermal shutdown, and reverse current protection; (6) Power Good – an open-drain comparator monitors the output voltage.

Pin Description: TPS74401RGWR Pin Definition and Functions
Pin Name Type Function
1-4 OUT Output Regulated output voltage
5 SS Input Soft-start capacitor connection
6 PGOOD Output Power good open-drain output
7 FB Input Feedback voltage input
8 EN Input Enable input (active high)
9-12 IN Power Input voltage supply
13 BIAS Power Bias supply input for internal circuitry
14-17 GND Ground Ground connections (thermal pad)
18-20 NC Unused No connect
Application Scenarios: In which products and applications is TPS74401RGWR used
  • FPGA core and I/O voltage regulation with controlled startup
  • DSP and ASIC power with specific sequencing requirements
  • Post-regulation for switching converters with noise-sensitive loads
  • Hot-swap power supply with inrush current limiting
  • Telecom and networking equipment power rails
Alternative Models: What chips are recommended as replacements for TPS74401RGWR
Manufacturer Part Number Package Notes
Texas Instruments TPS7A4500DCQR TO-263-7 3A LDO, 20V input
Analog Devices LT3083ETS8#PBF SOT-223-8 3A, parallelable LDO
Microchip MIC39301-1.8WU-TR TO-263-5 3A, 1.8V fixed, LDO
ON Semiconductor NCP59302MN33TYG DFN-8 3A, 3.3V, automotive
Maxim Integrated MAX8792ETJ+ TQFN-32 3A, DDR termination

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1