Opens in a new tab

TPS76301DBVR

150mA LDO, adj 1.5-6.5V, 300mV dropout, EN pin, 85uA Iq, SOT-23-5

8900

Effective Inventory

Image for reference only

Manufacturer Part:

TPS76301DBVR

Package:

SOT-23-5 (2.90 x 1.60 x 1.10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS76301DBVR from Texas Instruments is a 150 mA low-dropout (LDO) adjustable linear regulator in a 5-pin SOT-23 package. It features a 1.192 V reference voltage, adjustable output from 1.5 V to 6.5 V, 300 mV dropout at 150 mA, enable pin, and operates from 2.7 V to 10 V input.

Key Specifications

Output Current 150 mA
Output Voltage 1.5 V to 6.5 V (adjustable)
Reference Voltage 1.192 V
Input Voltage Range 2.7 V to 10 V
Dropout Voltage 300 mV typical @ 150 mA
Quiescent Current 85 uA typical
Shutdown Current 1 uA max
PSRR 60 dB @ 1 kHz
Operating Temperature -40°C to +125°C

Features

  • Low 300 mV dropout voltage at 150 mA load
  • Adjustable output using external resistor divider
  • Enable pin with active-high logic for shutdown mode
  • Overcurrent protection and thermal shutdown
  • Reverse polarity protection
  • Low 85 uA quiescent current during operation
  • 1 uA maximum shutdown current
  • 5-pin SOT-23 package for space-constrained designs

Applications

  • Portable and battery-powered electronics
  • Wireless communication systems
  • DSP, MCU, and FPGA power supplies
  • USB-powered devices
Product Introduction: TPS76301DBVR Product Introduction

The TPS76301DBVR from Texas Instruments is a low-power 150 mA low-dropout linear regulator in a compact 5-pin SOT-23 package. The adjustable output version allows the output voltage to be set from 1.5 V to 6.5 V using an external resistor divider with the 1.192 V internal reference. The device features a low dropout voltage of 300 mV at full 150 mA load, enabling efficient operation even when the input-to-output differential is small. The enable (EN) pin allows the regulator to be placed into a low-power shutdown mode drawing only 1 uA maximum, making it suitable for battery-powered systems where power conservation is critical. The quiescent current during normal operation is just 85 uA typical, and the device provides 60 dB power supply rejection ratio at 1 kHz, ensuring clean output voltage even from noisy input supplies. Protection features include overcurrent limiting, thermal shutdown, and reverse polarity protection.

Working Principle: TPS76301DBVR Working Principle

The TPS76301DBVR operates through three functional blocks: (1) The bandgap reference generates a precise 1.192 V that serves as the internal reference. The FB (feedback) pin senses the output voltage through the external resistor divider, and the error amplifier compares the divided voltage with the reference to regulate the output. The output voltage is calculated as VOUT = 1.192 x (1 + R1/R2). (2) The pass transistor is a P-channel MOSFET controlled by the error amplifier. When the output voltage drops below the target, the amplifier reduces the gate drive, increasing the pass transistor current to restore regulation. The dropout voltage of 300 mV at 150 mA represents the minimum headroom required for proper regulation. (3) The enable circuit toggles the regulator between active and shutdown modes. When EN is driven below 0.5 V, the pass transistor is turned off and the supply current drops to 1 uA. When EN is above 2 V, normal regulation resumes. Protection circuits include current limiting that restricts output current to a safe level during overload and thermal shutdown that disables the output when the junction temperature exceeds approximately 160°C.

Pin Description: TPS76301DBVR Pin Definition and Functions
Pin No. Pin Name Function
1 IN Input voltage supply (2.7-10 V)
2 GND Ground
3 EN Enable input (high=on, low=shutdown)
4 FB Feedback input for adjustable output
5 OUT Regulated output voltage (150 mA max)
Application Scenarios: In which products and applications is TPS76301DBVR used
  • Portable and battery-powered electronics where the 1 uA shutdown current preserves battery life during sleep modes and the 85 uA operating quiescent current minimizes standby drain
  • Wireless communication systems requiring a clean supply rail with 60 dB PSRR to prevent RF noise from modulating the power supply
  • DSP and FPGA I/O rail power where the adjustable output allows the same device to generate 1.8 V, 2.5 V, or 3.3 V rails with different resistor dividers
  • USB-powered peripherals converting 5 V bus to adjustable lower voltages with the enable pin controlled by USB suspend signaling
Alternative Models: What chips are recommended as replacements for TPS76301DBVR
Model Brand Iout Vout Adj Package
TPS76301DBVT TI 150 mA 1.5-6.5 V SOT-23-5
TLV70033DDCR TI 200 mA Fixed SOT-23-5
AP2112K-ADJTRG1 Diodes 600 mA Adj SOT-23-5
MIC5219-3.3YM5-TR Microchip 500 mA Fixed 3.3V SOT-23-5
RT9013-33GB Richtek 300 mA Fixed 3.3V SOT-23-5

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1