Opens in a new tab

TPS78233DDCR

150mA ultra-low Iq (1.3uA) LDO, 3.3V fixed output, 250mV dropout, SOT-23-5 Thin

2409

Effective Inventory

Image for reference only

Manufacturer Part:

TPS78233DDCR

Package:

SOT-23-5 Thin / TSOT-23-5 (2.9 x 1.6 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS78233DDCR from Texas Instruments is an ultra-low quiescent current, low-dropout (LDO) linear regulator providing a fixed 3.3V output at up to 150mA. With a quiescent current of just 1.3uA (typical), it is optimized for battery-powered and always-on applications. The device features a 250mV maximum dropout at full load, enable pin for power sequencing, and integrated active output pull-down for rapid discharge. It is housed in a thin SOT-23-5 package suitable for space-constrained designs.

Key Specifications

Output Voltage 3.3V (Fixed)
Output Current 150mA
Input Voltage Range 2.7V to 5.5V
Dropout Voltage 250mV max @ 150mA
Quiescent Current (Iq) 1.3uA (typical)
PSRR 40dB to 15dB (10Hz to 1kHz)
Enable Pin Active High
Protection Over-current, Over-temperature, Reverse Polarity
Operating Temperature -40 to 125°C
Package SOT-23-5 Thin (TSOT-23-5)

Features

  • Ultra-low quiescent current of 1.3uA extends battery life
  • 500nA shutdown current for near-zero power in standby
  • Active output pull-down for controlled discharge
  • Stable with no output load (zero-load capability)
  • Enable pin with CMOS-compatible logic levels
  • Over-current, over-temperature, and reverse polarity protection
  • Small SOT-23-5 thin package for compact designs

Applications

  • Battery-powered IoT and wearable devices
  • Always-on power rails in portable electronics
  • Sensor power supply and signal conditioning
  • Low-power microcontroller voltage regulation
  • Portable medical instruments
Product Introduction: TPS78233DDCR Product Introduction

The TPS78233DDCR is a member of Texas Instruments’ TPS782 family of ultra-low quiescent current LDO regulators. Designed specifically for battery-operated and always-on systems, this device delivers a fixed 3.3V output at up to 150mA while drawing only 1.3uA of quiescent current. The innovative internal circuit maintains excellent output voltage regulation even under zero-load conditions, addressing a common limitation of traditional PMOS LDOs. The integrated active pull-down rapidly discharges the output when the device is disabled, ensuring predictable power-down behavior. Housed in a thin SOT-23-5 package, the TPS78233DDCR is ideal for space-constrained portable applications.

Working Principle: TPS78233DDCR Working Principle

The TPS78233DDCR uses a PMOS pass transistor to achieve low dropout voltage regulation. The error amplifier compares a fraction of the output voltage (via an internal resistor divider set for 3.3V) with an internal bandgap reference, and adjusts the PMOS gate drive to maintain regulation. The ultra-low quiescent current is achieved through a specialized bias circuit that minimizes operating current while preserving loop stability. An innovative light-load circuit maintains loop gain at zero-load conditions, ensuring regulation without a minimum load requirement. The enable pin (EN) is active-high and compatible with standard CMOS logic. When disabled, an active pull-down circuit discharges the output capacitor to within 5% of VOUT. The device includes built-in over-current, over-temperature, and reverse polarity protection circuits.

Pin Description: TPS78233DDCR Pin Definition and Functions
Pin Name Type Function
1 IN Power Input voltage supply (2.7V to 5.5V)
2 GND Ground Ground reference
3 EN Input Enable (active high); connect to IN if not used
4 NC – No internal connection
5 OUT Output Regulated 3.3V output
Application Scenarios: In which products and applications is TPS78233DDCR used
  • Always-on power rails in battery-powered IoT sensors and wearables
  • Low-dropout regulation for single-cell Li-Ion to 3.3V systems
  • Portable medical devices requiring ultra-low standby power consumption
  • Microcontroller and sensor power supply in wireless metering applications
  • Post-regulation stage after switching converters in noise-sensitive circuits
Alternative Models: What chips are recommended as replacements for TPS78233DDCR
Manufacturer Part Number Package Notes
TI TPS78228DDCR SOT-23-5 2.8V fixed output variant
TI TPS79933DDCR SOT-23-5 3.3V, 200mA, low noise
Microchip MCP1824T-3302E/OT SOT-23-5 3.3V, 300mA LDO
Richtek RT9013-33GB SOT-23-5 3.3V, 300mA LDO
Diodes Inc AP2112K-3.3 SOT-23-5 3.3V, 600mA LDO

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1