Opens in a new tab

TS12A12511DCNR

SPDT analog switch, 0.9Ohm RON, 1.8-5.5V, break-before-make, SC-70-6

13800

Effective Inventory

Image for reference only

Manufacturer Part:

TS12A12511DCNR

Package:

SC-70-6 / SOT-363 (2.0 x 1.25 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TS12A12511DCNR is a single-pole double-throw (SPDT) analog switch from Texas Instruments with 0.9 Ohm on-resistance, 1.8V to 5.5V operation, and break-before-make switching in a tiny SC-70-6 (SOT-363) package.

Key Specifications

Configuration SPDT (1 Form C)
On-Resistance (RON) 0.9 Ohm typical @ 5V
On-Resistance Flatness 0.3 Ohm typical @ 5V
Supply Voltage Range 1.8 V to 5.5 V (single supply)
Switch Bandwidth 300 MHz typical
Charge Injection 15 pC typical
Off-Leakage Current ±0.5 nA typical
Switching Time (tON) 20 ns typical
Break-Before-Make Yes
Operating Temperature -40°C to +125°C
Package SC-70-6 (SOT-363)

Features

  • Ultra-low RON: 0.9 Ohm typical at 5V
  • Wide supply range: 1.8V to 5.5V single supply
  • Break-before-make switching prevents signal glitching
  • 300 MHz signal bandwidth
  • Low charge injection: 15 pC
  • Low off-leakage: ±0.5 nA
  • 1.8V logic compatible control input
  • Compact SC-70-6 package

Applications

  • Audio and video signal routing
  • Battery-powered signal switching
  • Portable instrumentation
  • Communication signal paths
  • Sensor multiplexing
Product Introduction: TS12A12511DCNR Product Introduction

The TS12A12511DCNR is a single-pole double-throw (SPDT) analog switch from Texas Instruments featuring ultra-low 0.9 Ohm on-resistance at 5V supply and 1.8V to 5.5V single-supply operation. The device provides break-before-make switching to prevent momentary signal shorting during commutation, and achieves 300 MHz signal bandwidth with only 15 pC charge injection. The low off-leakage current of ±0.5 nA makes it suitable for precision signal routing in battery-powered instruments. The 1.8V-compatible control input enables direct interface with low-voltage microcontrollers. The tiny SC-70-6 (SOT-363) package occupies minimal PCB area, making it ideal for space-constrained portable applications.

Working Principle: TS12A12511DCNR Working Principle

The TS12A12511 uses a CMOS transmission gate structure for each switch element. A transmission gate consists of an N-channel and P-channel MOSFET connected in parallel, with complementary gate drive signals. This parallel configuration provides a low and relatively flat on-resistance across the full signal voltage range, as the NMOS conducts well for signals near ground while the PMOS conducts well for signals near VCC. The SPDT configuration has two transmission gates with a common terminal (COM) and two switched terminals (NO and NC). The control input selects which gate is on: when IN is high, the normally-open (NO) path conducts; when IN is low, the normally-closed (NC) path conducts. The break-before-make circuit adds a brief dead time (both switches open) during transition, preventing the two signal paths from being momentarily shorted together. Charge injection is minimized by matching the NMOS and PMOS charge contributions.

Pin Description: TS12A12511DCNR Pin Definition and Functions
Pin Name Type Description
1 NC Signal Normally-closed terminal (conducts when IN=LOW)
2 COM Signal Common terminal
3 NO Signal Normally-open terminal (conducts when IN=HIGH)
4 IN Input Control input (1.8V logic compatible)
5 GND Power Ground
6 VCC Power Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is TS12A12511DCNR used
  • Audio Signal Routing: 0.9 Ohm RON and low 0.3 Ohm flatness ensure minimal signal distortion in audio switchers
  • Battery-Powered Instruments: 1.8V minimum operation and ±0.5 nA leakage suit single-cell Li-Ion and coin-cell applications
  • Video Switching: 300 MHz bandwidth passes composite and component video signals without degradation
  • Sensor Multiplexing: Break-before-make prevents sensor cross-talk; low charge injection minimizes sampling artifacts
  • Portable Communication: Compact SC-70-6 package and wide 1.8-5.5V operation for handheld radio signal routing
Alternative Models: What chips are recommended as replacements for TS12A12511DCNR
Model Manufacturer Key Difference Package Specs
TS5A3159DCKR TI SPDT, 1 Ohm, SC-70-6, similar function – –
NC7SB3157P6X onsemi SPDT, 2.5 Ohm, SC-70-6, lower cost – –
ADG719BRTZ-REEL7 ADI SPDT, 2.5 Ohm, SOT-23-6 – –
DG9411EDJ-T1-GE3 Vishay SPDT, 1 Ohm, SC-70-6 – –
NLAS7153DFT2G onsemi SPDT, 0.5 Ohm, MicroPak-6 – –

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1