Opens in a new tab

TS5A22362DRCR

2-ch SPDT analog switch, 0.65Ohm, neg signal, VSON-10

4130

Effective Inventory

Image for reference only

Manufacturer Part:

TS5A22362DRCR

Package:

VSON-10 (3.0 x 3.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TS5A22362DRCR from Texas Instruments is a 2-channel SPDT (single-pole double-throw) analog switch with negative signaling capability in a 10-pin VSON package. With 0.65 Ohm typical ON resistance, 17.5MHz bandwidth, and break-before-make switching, it is designed for audio signal routing and negative voltage swing applications.

Key Specifications

Configuration Dual SPDT (2:1 mux/demux)
Channels 2
Supply Voltage 2.3V to 5.5V
Analog Signal Range VCC-5.5V to VCC
Negative Swing Down to -2.75V (with VCC=2.75V)
Ron (typical) 0.52 Ohm @ 5V; 0.65 Ohm @ 3.3V
Ron (max) 0.83 Ohm @ 5V; 1.3 Ohm @ 3.3V
Ron Match 0.04 Ohm typ (5V)
Ron Flatness 0.076 Ohm typ (5V)
Bandwidth 17.5 MHz
Turn-On Time 34ns typ (3.3V); 80ns max
Turn-Off Time 19ns typ (3.3V); 70ns max
BBM Time 1-7 ns
Charge Injection 150 pC
OFF Capacitance 70 pF
ON Capacitance 370 pF
THD 0.008% (20Hz-20kHz)
Crosstalk -76 dB @ 100kHz
OFF Isolation -68 dB @ 100kHz
Supply Current 0.1 uA typ
Operating Temperature -40 to +85 C
Package VSON-10 (3.0 x 3.0 mm)
Status Active

Features

  • 0.65 Ohm low ON resistance
  • Negative signaling capability (down to -2.75V)
  • Break-before-make switching
  • Very low THD: 0.008%
  • Excellent Ron matching: 0.04 Ohm
  • 17.5MHz bandwidth for audio applications
  • Bidirectional signal flow
  • ESD: 2.5kV HBM, 1.5kV CDM
  • Non-magnetic package option (DRC) for medical imaging

Applications

  • Audio signal routing and switching
  • Headphone/speaker multiplexing
  • Negative voltage signal switching
  • Medical imaging (non-magnetic version)
Product Introduction: TS5A22362DRCR Product Introduction

The TS5A22362DRCR from Texas Instruments is a 2-channel SPDT analog switch with negative signaling capability in a 10-pin VSON (3.0 x 3.0mm) package. The DRC denotes the VSON-10 package, R denotes tape and reel. The device features two independent single-pole double-throw (SPDT) switches, each routing a common (COM) terminal to one of two selectable throws (NO or NC) controlled by an IN pin. The key differentiator is the negative signaling capability: the analog signal range extends from VCC down to VCC-5.5V, allowing signals below ground (down to -2.75V with VCC=2.75V) to pass without distortion. This is critical for audio applications where AC-coupled signals swing symmetrically around ground. The 0.65 Ohm typical ON resistance at 3.3V (0.52 Ohm at 5V) with excellent 0.04 Ohm channel matching and 0.076 Ohm flatness minimizes signal attenuation and distortion. The 0.008% THD specification makes this switch ideal for high-fidelity audio signal routing. Break-before-make (BBM) switching with 1-7ns delay prevents momentary signal shorting during switching transitions.

Working Principle: TS5A22362DRCR Working Principle

The TS5A22362DRCR operates through three subsystems: (1) Analog Switch Core: Each SPDT switch consists of two N-channel MOSFET pass gates (COM-to-NO and COM-to-NC) controlled by the IN input. When IN is high, the COM-to-NO path is ON and COM-to-NC is OFF. When IN is low, COM-to-NC is ON and COM-to-NO is OFF. The MOSFET gates are driven by a charge pump that generates a voltage above VCC, ensuring the pass gates are fully enhanced even for signals near VCC, minimizing Ron. (2) Negative Signaling: The charge pump also generates a gate voltage below ground for the N-channel MOSFET body terminals. This prevents the parasitic body diodes from conducting when the analog signal swings below ground, allowing negative signals to pass without clipping. The signal range extends from VCC-5.5V to VCC, providing up to 5.5V of signal swing in either direction. (3) Break-Before-Make: When the IN pin transitions, the currently ON switch turns OFF first (1-7ns BBM time), then the other switch turns ON. This prevents the two throws (NO and NC) from being momentarily shorted together through the COM node, which would cause signal glitches and potentially damage downstream circuitry.

Pin Description: TS5A22362DRCR Pin Definition and Functions
Pin Name Type Description
1 VCC Power Positive supply (2.3-5.5V)
2 NC1 I/O Channel 1 normally-closed throw
3 COM1 I/O Channel 1 common terminal
4 NO1 I/O Channel 1 normally-open throw
5 GND Power Ground
6 IN2 Input Channel 2 control (H=NO, L=NC)
7 NO2 I/O Channel 2 normally-open throw
8 COM2 I/O Channel 2 common terminal
9 NC2 I/O Channel 2 normally-closed throw
10 IN1 Input Channel 1 control (H=NO, L=NC)
Application Scenarios: In which products and applications is TS5A22362DRCR used
  • Audio headphone/speaker multiplexer with 0.65Ohm Ron, 0.008% THD, and negative swing for AC-coupled audio signals below ground
  • Medical imaging signal routing using non-magnetic VSON package with 17.5MHz bandwidth and BBM switching
  • USB 2.0 D+/D- signal routing with SPDT configuration for device/host mode switching at 5V supply
  • Industrial sensor signal selection with negative voltage capability for bidirectional current-sense signals
Alternative Models: What chips are recommended as replacements for TS5A22362DRCR
Model Manufacturer Ron BBM Notes
TS5A22364DRCR TI 0.65Ohm No Make-before-break variant
TS5A3159DCKR TI 1.0Ohm Yes Single SPDT, smaller package
NC7SB3157P6X onsemi 1.0Ohm Yes Single SPDT, SC-88
ADG719BRMZ ADI 2.5Ohm Yes Single SPDT, MSOP-8

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1