Opens in a new tab

TSETKLJATF-20MHZ

20MHz TCXO, CMOS, 3.3V, ±4.6ppm stability, ±1ppm/year aging, 10-SMD 7x5mm

980

Effective Inventory

Image for reference only

Manufacturer Part:

TSETKLJATF-20MHZ

Package:

10-SMD (7.0 x 5.0 x 2.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TSETKLJATF-20MHZ from Taitien is a 20 MHz TCXO (Temperature Compensated Crystal Oscillator) with CMOS output, operating from 3.3V supply. It features ultra-high frequency stability of ±4.6ppm over -40°C to +85°C, making it ideal for precision timing applications such as GPS, synchronous Ethernet, and IEEE 1588.

Key Specifications

Type TCXO (Temperature Compensated Crystal Oscillator)
Frequency 20 MHz
Output CMOS
Supply Voltage 3.3V (2.8V to 3.47V range)
Frequency Stability ±4.6ppm over -40°C to +85°C
Frequency Tolerance ±1.5ppm at 25°C
Frequency Aging ±1ppm/year (maximum)
Max Supply Current 7.5 mA (typical)
Operating Temperature -40°C to +85°C
Package 10-SMD (7.0 x 5.0 x 2.0 mm)
Load Capacitance 15 pF

Features

  • Ultra-high stability: ±4.6ppm over -40°C to +85°C
  • 20 MHz CMOS output for precision timing
  • Low aging rate: ±1ppm per year maximum
  • Frequency tolerance: ±1.5ppm at 25°C
  • 3.3V supply voltage operation
  • Enable/Disable function for power management
  • 10-SMD package: 7.0 x 5.0 x 2.0mm
  • RoHS compliant
  • Suitable for IEEE 1588 and GPS applications

Applications

  • GPS/GNSS receiver timing references
  • IEEE 1588 Precision Time Protocol
  • Synchronous Ethernet (SyncE)
  • Microwave communication systems
  • Industrial precision timing
  • Telecom base station synchronization
Product Introduction: TSETKLJATF-20MHZ Product Introduction

The TSETKLJATF-20MHZ from Taitien is a 20 MHz Temperature Compensated Crystal Oscillator (TCXO) providing CMOS output from a 3.3V supply. The device achieves ultra-high frequency stability of ±4.6ppm over the full -40°C to +85°C industrial temperature range, making it suitable for precision timing applications where standard crystal oscillators (±50-100ppm) are inadequate. The TCXO uses an analog compensation circuit that generates a temperature-dependent correction voltage applied to a varactor diode in the crystal oscillator circuit, pulling the frequency to compensate for the crystal’s temperature-frequency characteristic. The K in the part number denotes the ±4.6ppm stability grade, L denotes the temperature range (-40°C to +85°C), J denotes CMOS output, and A indicates the supply voltage class. The device offers ±1ppm/year maximum aging and ±1.5ppm frequency tolerance at 25°C.

Working Principle: TSETKLJATF-20MHZ Working Principle

The TSETKLJATF-20MHZ operates through four key subsystems:

1. Crystal Oscillator: An AT-cut quartz crystal provides the 20 MHz frequency reference. The crystal is cut at a specific angle to optimize its temperature-frequency characteristic, but even with optimal cutting, the crystal exhibits a cubic temperature dependence that limits uncompensated stability to ±30-50ppm.

2. Temperature Sensing: A thermistor network or integrated temperature sensor measures the ambient temperature with high accuracy. The temperature sensor output is calibrated against the crystal’s individual temperature-frequency characteristic during production.

3. Compensation Circuit: An analog compensation circuit generates a correction voltage based on the measured temperature. This voltage is applied to a varactor diode (voltage-controlled capacitor) in the crystal oscillator’s load capacitance network. The varactor capacitance change pulls the oscillator frequency to compensate for the crystal’s temperature-induced frequency deviation. The compensation polynomial (typically 3rd order) is programmed during calibration.

4. CMOS Output: The compensated oscillator signal is buffered through a CMOS output driver providing rail-to-rail swing at 3.3V. The output driver is isolated from the oscillator to prevent load-pulling effects that could degrade frequency stability.

Pin Description: TSETKLJATF-20MHZ Pin Definition and Functions
Pin Name Type Function
1 VC Input Voltage control input for fine frequency tuning (optional)
2 NC – Not connected
3 NC – Not connected
4 GND Power Ground
5 GND Power Ground
6 NC – Not connected
7 OUTPUT Output CMOS clock output (20 MHz)
8 NC – Not connected
9 VDD Power Supply voltage (3.3V)
10 NC / ENABLE Input Enable/Disable (active high)
Application Scenarios: In which products and applications is TSETKLJATF-20MHZ used
  • GPS/GNSS: ±4.6ppm stability ensures satellite signal acquisition and tracking with minimal Doppler search window; 20 MHz is a common GPS reference frequency for downconversion
  • IEEE 1588 PTP: ±1ppm/year aging and ±4.6ppm temperature stability enable sub-microsecond time synchronization over extended periods without external calibration
  • Synchronous Ethernet: ±4.6ppm stability meets ITU-T G.8262 EEC (Ethernet Equipment Clock) requirements for SyncE frequency distribution in telecom networks
  • Microwave comm: Low phase noise TCXO reference enables stable up/down conversion in microwave radio links operating at GHz frequencies
Alternative Models: What chips are recommended as replacements for TSETKLJATF-20MHZ
Manufacturer Part Number Package Notes
Taitien TSETTLJATF-20.00MHz 10-SMD 7×5 Same freq, different stability grade
Taitien TLEAMLJATF-20.000000 10-SMD 5×3.2 VCTCXO, ±100ppb, compact
Epson TG-5035CE-20.000000M SMD 20MHz TCXO, ±2.0ppm
Rakon PTA20-2.5-3.3-4.0-50 SMD 20MHz TCXO, ±4.0ppm
NXP 8N3DV85EC-0200EDT SMD 20MHz VCTCXO, ±0.5ppm
SiTime SIT3808AI-33-20.000000T SMD 20MHz TCXO, MEMS, ±0.5ppm

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1