Opens in a new tab

TXB0102DCUR

2-bit bidirectional level translator, auto-direction, 1.2-5.5V, VSSOP-8

9876

Effective Inventory

Image for reference only

Manufacturer Part:

TXB0102DCUR

Package:

VSSOP-8 / DCU (2 x 3.1 x 0.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXB0102DCUR from Texas Instruments is a 2-bit bidirectional voltage-level translator with auto-direction sensing and +/-15kV ESD protection in VSSOP-8 package. Supporting 1.2V to 5.5V level translation at up to 100Mbps, it enables universal voltage bridging between logic domains.

Key Specifications

Bits 2
Data Rate 100 Mbps max
VCCA Range 1.2 V to 3.6 V
VCCB Range 1.65 V to 5.5 V
Direction Control Auto-direction sensing
Supply Current 4 uA max
ESD (B Port) +/-15 kV HBM
Output Enable Yes (OE pin, active high)
Package VSSOP-8 (DCU)
Operating Temperature -40 to +85 C

Features

  • Auto-direction sensing eliminates direction control pins
  • 1.2V to 5.5V universal translation between any voltage nodes
  • 100Mbps data rate supports high-speed digital interfaces
  • +/-15kV ESD protection on B port for external connections
  • VCC isolation: outputs high-Z when either supply is at GND
  • 4uA max supply current for battery-powered applications

Applications

  • GPIO level translation between 1.8V and 3.3V processors
  • SPI bus voltage bridging
  • UART interface level shifting
  • Multi-voltage I2C and SPI interfacing
  • Portable equipment voltage domain bridging
Product Introduction: TXB0102DCUR Product Introduction

The TXB0102DCUR from Texas Instruments is a 2-bit bidirectional voltage-level translator with automatic direction sensing, eliminating the need for direction control signals. The A port supports 1.2V to 3.6V and the B port supports 1.65V to 5.5V (VCCA must not exceed VCCB), enabling universal translation between any combination of 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5V logic domains. The device supports data rates up to 100Mbps with push-pull topology and features +/-15kV HBM ESD protection on the B port. The VCC isolation feature places all outputs in high-impedance state when either supply is grounded, and the OE pin allows output disable. The 4uA maximum supply current makes it suitable for battery-powered applications.

Working Principle: TXB0102DCUR Working Principle

The TXB0102DCUR operates as an auto-direction-sensing bidirectional voltage-level translator. (1) Each channel has two edge-rate-accelerated drivers connected back-to-back between the A and B ports. When one port drives a logic level, the auto-direction circuit detects the edge and enables the driver in the translating direction while placing the opposite driver in a high-impedance monitor state. (2) The edge-rate accelerator briefly boosts the drive current during transitions to overcome the parasitic capacitance of the bidirectional node, then reduces to a weak holding current to avoid bus contention. (3) The VCC isolation feature monitors both supply rails: if either VCCA or VCCB drops below the operational threshold, all output drivers are disabled to prevent backflow current. The OE pin referenced to VCCA allows the host controller to disable all outputs.

Pin Description: TXB0102DCUR Pin Definition and Functions
Pin Name Function
1 OE Output enable (active high, VCCA ref)
2 GND Ground
3 A1 Channel 1, A port
4 A2 Channel 2, A port
5 VCCA A port supply (1.2-3.6V)
6 B1 Channel 1, B port
7 B2 Channel 2, B port
8 VCCB B port supply (1.65-5.5V)
Application Scenarios: In which products and applications is TXB0102DCUR used
  • GPIO level translation between 1.8V MCU and 3.3V peripheral
  • SPI bus voltage bridging between 2.5V processor and 5V SPI Flash
  • UART interface level shifting between 1.8V and 3.3V domains
  • Multi-voltage I2C interfacing with auto-direction for open-drain compatibility
  • Portable equipment voltage domain bridging with VCC isolation feature
Alternative Models: What chips are recommended as replacements for TXB0102DCUR
Model Manufacturer Key Difference
TXB0104PWR TI 4-bit version, TSSOP-14
TXS0102DCUR TI Open-drain compatible (I2C)
PCA9306DCUR TI I2C/SMBus level translator
SN74LVC1T45DBVR TI 1-bit, direction-controlled
NTB0102GU8 NXP 2-bit auto-direction translator

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1