Opens in a new tab

TXS0102DCTT

2-bit bidirectional level translator, 1.65-3.6V/2.3-5.5V, SSOP-8

11200

Effective Inventory

Image for reference only

Manufacturer Part:

TXS0102DCTT

Package:

SSOP-8 (2.95 x 4.0 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TXS0102DCTT from Texas Instruments is a 2-bit bidirectional voltage-level translator for open-drain and push-pull applications, supporting 1.65V-3.6V on A port and 2.3V-5.5V on B port in SSOP-8 package.

Key Specifications

Channels 2-bit bidirectional
Data Rate (Push-Pull) 24 Mbps
Data Rate (Open-Drain) 2 Mbps
VCCA Range 1.65V to 3.6V
VCCB Range 2.3V to 5.5V (VCCA <= VCCB)
Direction Control Auto-direction (no control signal needed)
Output Enable Yes (active high, OE low = Hi-Z)
Propagation Delay 3-4 ns typical (push-pull)
Supply Current 25 uA max
ESD (B Port) 8 kV HBM
Package SSOP-8 (DCT suffix)
Operating Temperature -40 to +85 C

Features

  • Auto-direction sensing eliminates direction control signal
  • 24Mbps push-pull and 2Mbps open-drain data rates
  • VCC isolation: both ports Hi-Z if either supply is GND
  • No power-supply sequencing required
  • Edge-rate accelerator for fast open-drain rise times

Applications

  • I2C and SMBus voltage level translation
  • GPIO voltage domain crossing
  • UART and MDIO interface level shifting
  • SDIO voltage translation between 1.8V and 3.3V
  • Mixed-voltage system digital signal bridging
Product Introduction: TXS0102DCTT Product Introduction

The TXS0102DCTT from Texas Instruments is a 2-bit bidirectional voltage-level translator designed for open-drain and push-pull applications. The A port supports 1.65V to 3.6V operation tracking VCCA, while the B port supports 2.3V to 5.5V tracking VCCB. The auto-direction sensing eliminates the need for a direction-control signal, making it ideal for I2C, SMBus, and other bidirectional interfaces. The device supports 24Mbps in push-pull mode and 2Mbps in open-drain mode. VCC isolation places both ports in Hi-Z when either supply is at GND, and no power-supply sequencing is required. The DCTT suffix denotes SSOP-8 package with tape and reel packaging.

Working Principle: TXS0102DCTT Working Principle

The TXS0102DCTT operates as an auto-direction bidirectional level translator. (1) Each of the two channels consists of a pass transistor structure that can conduct in either direction. The A-side is designed for the lower voltage domain (1.65-3.6V) and the B-side for the higher voltage domain (2.3-5.5V). When one side drives low, the pass transistor conducts and pulls the other side low. (2) For open-drain applications (such as I2C), the edge-rate accelerator circuit detects a low-to-high transition on either side and briefly drives the line high to speed up the RC charge time. This one-shot accelerator reduces the open-drain rise time from hundreds of nanoseconds to tens of nanoseconds. The 2Mbps open-drain data rate supports standard I2C fast-mode (400kHz). (3) The auto-direction feature eliminates the need for a DIR control pin. The device senses the direction of data flow automatically based on which side is driving. When OE is low, all I/Os enter high-impedance state, enabling bus isolation. The VCC isolation feature ensures both ports are Hi-Z if either supply rail is at ground.

Pin Description: TXS0102DCTT Pin Definition and Functions
Pin Name Function
1 OE Output enable (active high)
2 VCCA A-port supply (1.65-3.6V)
3 A1 A-port channel 1 I/O
4 A2 A-port channel 2 I/O
5 GND Ground
6 B2 B-port channel 2 I/O
7 B1 B-port channel 1 I/O
8 VCCB B-port supply (2.3-5.5V)
Application Scenarios: In which products and applications is TXS0102DCTT used
  • I2C and SMBus voltage level translation between 1.8V and 3.3V/5V
  • GPIO voltage domain crossing with auto-direction sensing
  • UART and MDIO interface level shifting up to 24Mbps
  • SDIO voltage translation for mobile device interfaces
  • Mixed-voltage system digital signal bridging with VCC isolation
Alternative Models: What chips are recommended as replacements for TXS0102DCTT
Model Manufacturer Key Difference
TXS0108EPW TI 8-channel, TSSOP-20
TXB0108PWR TI 8-bit, auto-dir, push-pull
PCA9306DCUR TI 2-bit, I2C only, VSSOP-8
SN74LVC1T45DBVR TI 1-bit, dir-controlled, SOT-23-6
NVT2001DP NXP 1-bit, I2C level translator

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1