Product Overview
The UAF42AU is a universal active filter integrated circuit from Texas Instruments, designed to simplify the implementation of high-performance analog filters. Based on the state-variable filter topology, this device can be configured as a low-pass, high-pass, band-pass, band-reject (notch), or all-pass filter by selecting appropriate external resistors and capacitors.
The UAF42AU integrates two operational amplifiers, two integrators, and a summing amplifier on a single monolithic chip, along with on-chip 1000pF polypropylene capacitors that provide excellent temperature stability and low loss. The device achieves filter Q factors up to 100 and cutoff frequencies up to 100 kHz, with frequency stability of 50 ppm/°C typical — far superior to filters implemented with general-purpose op-amps and discrete capacitors.
Available in an SOIC-14 surface-mount package, the UAF42AU operates from ±15V or single 30V supplies. Its versatility and performance make it ideal for applications including anti-aliasing filters in data acquisition systems, bandpass filters for communications, audio processing, and industrial signal conditioning where precise filter characteristics are required without the complexity of discrete multi-stage designs.
Key Specifications
| Parameter | Value |
|---|---|
| Filter Topology | State-variable (biquad) |
| Filter Types Supported | Low-pass, High-pass, Band-pass, Notch, All-pass |
| Maximum Center Frequency (f0) | 100 kHz |
| Q Factor Range | 0.5 to 100 |
| Gain Range | Up to 100 V/V |
| Frequency Stability | 50 ppm/°C typical |
| On-chip Capacitors | 2 × 1000 pF (±0.5% matched, polypropylene) |
| Supply Voltage Range | ±9V to ±18V (dual) or 18V to 36V (single) |
| Supply Current | 4.5 mA typical (quiescent) |
| Slew Rate | 8 V/µs typical |
| Gain-Bandwidth Product | 2 MHz typical |
| THD (Total Harmonic Distortion) | 0.02% typical @ 1 kHz |
| Input Offset Voltage | ±5 mV max |
| Operating Temperature | –40°C to +85°C |
| Package | SOIC-14 (surface mount) |
Features
- Universal state-variable filter: LP, HP, BP, Notch, All-pass
- High frequency stability: 50 ppm/°C typical
- On-chip 1000 pF polypropylene capacitors (matched to 0.5%)
- Q factors up to 100
- Frequencies up to 100 kHz
- Low total harmonic distortion: 0.02%
- Wide supply range: ±9V to ±18V
- Integrates 4 op-amps on one chip
- Only external resistors needed to set f0, Q, and gain
- Tunable via external resistors or digital potentiometers
- SOIC-14 surface-mount package
- Industrial temperature range: –40°C to +85°C
Applications
- Anti-aliasing and reconstruction filters for ADC/DAC systems
- Audio equalization and crossover networks
- Bandpass filters for communications and telemetry
- Notch filters for 50/60 Hz line noise rejection
- Data acquisition and instrumentation systems
- Medical equipment and biomedical signal processing
- Industrial process control and signal conditioning
- Test and measurement equipment













