Opens in a new tab

UCC5390SCD

Isolated Gate Driver, 5A/5A, 5kVrms, 1200V WV, SOIC-16

2345

Effective Inventory

Image for reference only

Manufacturer Part:

UCC5390SCD

Package:

SOIC-16 (10.3 x 7.5 x 2.65 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The UCC5390SCD from Texas Instruments is a 5A/5A isolated IGBT/SiC gate driver with 5kVrms isolation, 100ns propagation delay, and SOIC-16 package.

Key Specifications

Type 5A/5A Isolated IGBT/SiC Gate Driver
Peak Output Current +5A / -5A (source/sink)
Isolation Rating 5000 Vrms (1 minute)
Working Voltage 1200 Vpeak (reinforced)
Propagation Delay 100 ns (typical)
Pulse Width Distortion 15 ns (max)
UVLO Yes (both input and output side)
Supply Voltage (input) 3.0V to 15V
Supply Voltage (output) 15V to 33V
Package SOIC-16 (10.3 x 7.5 mm)
Operating Temperature -40C to +125C
Safety Approvals UL1577, VDE, CSA, CQC

Features

  • 5A source / 5A sink gate drive capability
  • 5000Vrms reinforced isolation
  • 1200Vpeak working voltage for SiC/IGBT
  • 100ns typical propagation delay
  • Dual UVLO on input and output sides
  • Active-high and active-low inputs
  • Enable and disable functionality

Applications

  • SiC MOSFET gate drive
  • IGBT inverter drive
  • Motor drive power stage
  • Solar inverter
Product Introduction: UCC5390SCD Product Introduction

The UCC5390SCD from Texas Instruments is a 5A/5A isolated gate driver designed for driving IGBTs and SiC MOSFETs in high-voltage power conversion applications. The 5000 Vrms reinforced isolation and 1200 Vpeak working voltage make it suitable for 1200V-class power modules used in motor drives, solar inverters, and EV chargers. The 5A peak source and sink current provides fast switching for SiC MOSFETs, minimizing switching losses. The 100 ns typical propagation delay enables high-frequency PWM operation up to 500 kHz. The dual UVLO (undervoltage lockout) on both input and output sides ensures the gate driver does not output a partial turn-on signal when supply voltages are insufficient. The device provides separate active-high (IN+) and active-low (IN-) inputs for flexible PWM signal interfacing, including direct differential signal reception. The SOIC-16 package provides the creepage and clearance distances required for reinforced isolation.

Working Principle: UCC5390SCD Working Principle

The UCC5390SCD uses capacitive isolation technology to transfer digital control signals across the galvanic isolation barrier. The input side receives the PWM signal and encodes it using on-off keying (OOK) modulation. The modulated signal crosses the SiO2 capacitive isolation barrier and is demodulated on the output side. The output stage consists of a push-pull buffer that can source 5A (pull-up transistor) and sink 5A (pull-down transistor) to rapidly charge and discharge the IGBT/SiC gate capacitance. The 100 ns propagation delay includes the OOK encoding, capacitive coupling, demodulation, and output buffer latency. The dual UVLO monitors both VCC1 (input side supply) and VCC2 (output side supply), disabling the output when either supply drops below the threshold. This prevents the output stage from entering a linear region where the IGBT/SiC could be partially turned on, causing excessive dissipation. The 15 ns maximum pulse width distortion ensures accurate PWM duty cycle reproduction at the gate.

Pin Description: UCC5390SCD Pin Definition and Functions
Pin Name Type Function
1 VCC1 Power Input side supply (3-15V)
2 IN+ Input Non-inverting PWM input
3 IN- Input Inverting PWM input
4 EN Input Enable (active HIGH)
5 GND1 Power Input side ground
6-9 NC – No connect (isolation gap)
10 VEE2 Power Output side negative supply
11 VOUT Output Gate drive output
12 VCC2 Power Output side positive supply
13 GND2 Power Output side ground
14-16 NC – No connect
Application Scenarios: In which products and applications is UCC5390SCD used
  • 1200V SiC MOSFET half-bridge gate drive in solar inverter with 5A/5A and 500kHz PWM
  • IGBT motor drive inverter with 5kVrms isolation and 100ns delay
  • EV on-board charger totem-pole PFC with 5A gate drive for SiC
  • Industrial UPS inverter with dual UVLO protection and 1200V working voltage
Alternative Models: What chips are recommended as replacements for UCC5390SCD
Manufacturer Part Number Package Notes
TI UCC5350SCD SOIC-16 3A/3A, lower drive current
TI UCC21750DWKR SOIC-16 10A/10A, higher drive
ADI iCoupler ADuM4121-1BRWZ SOIC-16 2A isolated gate driver
Infineon 1ED3122MU12F DSO-8 2A isolated, smaller package
Broadcom ACPL-332J-000E SDIP-16 2.5A opto-isolated gate driver

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1