Opens in a new tab

USB3320C-EZK-TR

USB 2.0 Hi-Speed ULPI Transceiver PHY, 480Mbps, QFN-32, USB-IF Certified

7256

Effective Inventory

Image for reference only

Manufacturer Part:

USB3320C-EZK-TR

Package:

QFN-32 (5 x 5 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The USB3320C-EZK-TR from Microchip Technology is a Hi-Speed USB 2.0 ULPI transceiver (PHY) providing the physical layer interface between a USB controller and the USB bus. It supports Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) USB operation with an ULPI (UTMI+ Low Pin Interface) to the link controller in a compact QFN-32 package.

Key Specifications

Type USB 2.0 Hi-Speed ULPI Transceiver (PHY)
USB Speed HS (480 Mbps) / FS (12 Mbps) / LS (1.5 Mbps)
Interface ULPI (12-pin, 60 MHz SDR)
Supply Voltage 1.8 V (core) / 3.3 V (I/O)
ESD Protection 4 kV HBM on D+/D-
ULPI Clock 60 MHz
Package QFN-32 (5 x 5 mm)
Operating Temperature -40°C to 85°C
Compliance USB-IF Certified

Features

  • USB 2.0 Hi-Speed ULPI PHY with 480 Mbps support
  • ULPI 12-pin interface at 60 MHz reduces pin count
  • Integrated pull-up and pull-down resistors
  • USB charger detection
  • Session Request Protocol (SRP) support
  • Host Negotiation Protocol (HNP) support
  • Internal D+/D- termination resistors
  • Low power consumption with suspend mode
  • 4 kV ESD protection on USB pins
  • ULPI interface with 8-bit or 12-bit data bus options

Applications

  • Embedded USB host and device implementations
  • Portable electronics with USB OTG capability
  • Industrial and medical devices with USB connectivity
  • Set-top boxes and networking equipment
  • USB hub and docking station designs
Product Introduction: USB3320C-EZK-TR Product Introduction

The USB3320C-EZK-TR from Microchip Technology is a Hi-Speed USB 2.0 ULPI transceiver that provides the physical layer interface between a USB link controller and the USB bus. It supports all three USB 2.0 data rates: Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps). The ULPI (UTMI+ Low Pin Interface) reduces the interface pin count between the PHY and the controller to just 12 signals using a 60 MHz SDR clock. The device integrates all USB termination resistors, supports USB OTG Session Request Protocol (SRP) and Host Negotiation Protocol (HNP), and includes USB charger detection. It is USB-IF certified for compliance.

Working Principle: USB3320C-EZK-TR Working Principle

The USB3320C-EZK-TR serves as the physical layer (PHY) between a USB controller (link) and the USB cable. On the link side, it communicates via the ULPI interface, which uses an 8-bit or 12-bit data bus clocked at 60 MHz. The ULPI protocol multiplexes data, control, and register access over the shared bus. On the USB side, it drives and receives the D+ and D- differential signals according to USB 2.0 electrical specifications. In Hi-Speed mode, the internal 480 Mbps transceiver is activated with current-mode drivers and high-speed receivers. In Full-Speed and Low-Speed modes, the FS/LS transceivers are used. The integrated charger detection circuit identifies the type of USB charger attached, enabling optimal charging current selection.

Pin Description: USB3320C-EZK-TR Pin Definition and Functions
Pin Group Name Type Function
1-8 DATA[0:7] I/O ULPI data bus (8-bit mode)
9 CLK Input 60 MHz ULPI clock from PHY
10 DIR Output ULPI bus direction indicator
11 STP Input ULPI stop signal from link
12 NXT Output ULPI next data indicator
13 REFCLK Input Reference clock (24 MHz)
14-15 DM/DP I/O USB D- and D+ data lines
16-17 VDD18 Power 1.8V core supply
18-19 VDD33 Power 3.3V I/O supply
20 GND Ground Ground
21 RST Input Reset (active low)
22 ID Input USB OTG ID pin sense
23 VBUS I/O USB VBUS sense and drive
24-32 CTRL/GND Mixed Control and ground pins
Application Scenarios: In which products and applications is USB3320C-EZK-TR used
  • Embedded SoC/FPGA USB host and device PHY interface
  • Portable devices with USB OTG functionality
  • Industrial equipment requiring USB connectivity
  • Set-top boxes and smart TV USB interfaces
  • USB docking stations and hub designs
Alternative Models: What chips are recommended as replacements for USB3320C-EZK-TR
Manufacturer Part Number Package Notes
Microchip USB3340-EZK-TR QFN-32 USB 2.0 ULPI with VBUS control
Texas Instruments TUSB1210RHBR VQFN-32 USB 2.0 ULPI transceiver
NXP ISP1507AET HVQFN-32 USB 2.0 ULPI PHY
Synopsys PHY4X2HSUBC IP Core USB 2.0 PHY IP
Microchip USB3300-EZK QFN-32 Earlier generation USB PHY

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1