Opens in a new tab

USBULC6-2M6

Dual ESD, 0.5pF, +/-8kV, SOT666 1×0.6mm, -40 to 125C

13224

Effective Inventory

Image for reference only

Manufacturer Part:

USBULC6-2M6

Package:

SOT666 (1.0×0.6×0.5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NXP USBULC6-2M6 is a dual-line ultra-low capacitance ESD protection device for USB 2.0/3.0 high-speed data lines. 0.5pF capacitance per line.

Key Specifications

Type Dual-Line ESD Protection
Capacitance 0.5 pF per line typ
Breakdown Voltage ~6V
Clamping Voltage ~12V @ IEC 8kV
ESD Rating IEC 61000-4-2 +/-8kV contact
Interface USB 2.0/3.0, HDMI, etc.
Operating Temp -40 to +125C
Package SOT666 (1.0×0.6mm)

Features

  • 0.5pF ultra-low capacitance
  • Dual-line protection
  • IEC 61000-4-2 +/-8kV contact ESD
  • For USB 2.0/3.0 high-speed lines
  • SOT666 ultra-compact 1.0×0.6mm
  • Bidirectional clamping
  • RoHS compliant

Applications

  • USB 2.0 D+/D- ESD
  • USB 3.0 Tx/Rx ESD
  • HDMI CEC line protection
  • MIPI high-speed ESD clamp
Product Introduction: USBULC6-2M6 Product Introduction

The USBULC6-2M6 from NXP is a dual-line ultra-low capacitance ESD protection device. 0.5pF per line preserves signal integrity on USB 2.0/3.0, HDMI, and MIPI high-speed differential lines. IEC 61000-4-2 +/-8kV contact discharge rating. SOT666 (1.0×0.6mm) ultra-compact footprint for dense portable PCBs.

Working Principle: USBULC6-2M6 Working Principle

Two silicon avalanche TVS diodes in a common-cathode configuration. When the line voltage exceeds the breakdown voltage (~6V), the diode avalanches and clamps the transient. The ultra-low 0.5pF capacitance is achieved by minimizing the junction area while maintaining adequate ESD current handling. The common-cathode architecture provides bidirectional protection.

Pin Description: USBULC6-2M6 Pin Definition and Functions
Pin Name Description
1 I/O1 Data line 1
2 GND Ground
3 I/O2 Data line 2
Application Scenarios: In which products and applications is USBULC6-2M6 used
  • USB ESD protect
  • HDMI CEC protect
  • MIPI ESD clamp
Alternative Models: What chips are recommended as replacements for USBULC6-2M6
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1