Opens in a new tab

WL1801MODGBMOCR

WiLink 8 WiFi/BT module, 802.11b/g/n, BT 4.1

13832

Effective Inventory

Image for reference only

Manufacturer Part:

WL1801MODGBMOCR

Package:

Module (13.5x10mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The WL1801MODGBMOCR from TI is a WiLink 8 combo module providing 802.11b/g/n WiFi and Bluetooth 4.1 with integrated antenna for IoT and embedded wireless applications.

Key Specifications

Package Module (13.5x10mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: WL1801MODGBMOCR Product Introduction

The WL1801MODGBMOCR from TI is a WiLink 8 combo module providing 802.11b/g/n WiFi and Bluetooth 4.1 with integrated antenna for IoT and embedded wireless applications.

Working Principle: WL1801MODGBMOCR Working Principle

The WL1801MODGBMOCR is a WiFi 802.11b/g/n and Bluetooth 4.1 combo module from Texas Instruments, based on the WiLink 8 (WL1801) chipset. The module integrates the WiFi transceiver, Bluetooth transceiver, power amplifier (PA), low-noise amplifier (LNA), RF switches, power management, and crystal oscillator in a 13.5×13.5×2.0mm LGA package. The host MCU communicates via SDIO for WiFi data and UART (HCI) for Bluetooth data, with separate enable pins (WL_EN for WiFi, BT_EN for Bluetooth) and a WiFi interrupt pin (WL_IRQ). The WiFi supports 802.11b/g/n in the 2.4GHz band with up to 72.2Mbps PHY rate (single spatial stream, 40MHz channel, short GI). The Bluetooth supports Classic (BR/EDR) and Low Energy (BLE) simultaneously via a shared antenna with time-division multiplexing. The module requires an external antenna connected to the RF_IN pin (typically via a U.FL connector or PCB trace antenna). The coexistence mechanism between WiFi and BT is handled internally by the WL1801 chipset, which time-multiplexes the antenna access and provides packet traffic arbitration (PTA) signals. The module operates from a single 1.8V or 3.3V supply (configurable via VDDIO). The MOCR suffix specifies the industrial temperature version (-40C to +85C) with module certification (FCC, CE, IC). The module is pre-certified for regulatory compliance, saving significant certification cost and time.

Pin Description: WL1801MODGBMOCR Pin Definition and Functions
Pin Name Type Function
1-4 GND/VDDIO/VDD_CORE Power Ground and power supplies (1.8V or 3.3V I/O)
5-8 SDIO_CMD/CLK/D0-D3 I/O SDIO interface (connects to host MCU SDIO controller)
9-12 UART_TX/RX/RTS/CTS I/O UART for HCI (host controller interface)
13-16 WL_EN/BT_EN/WL_IRQ Control WiFi enable, BT enable, WiFi interrupt
17-24 RF_IN/ANT/GND/NC RF Antenna connection (U.FL or PCB trace) and ground
25-32 PCM/I2S/GPIO I/O Audio interface (PCM/I2S for Bluetooth voice)
Application Scenarios: In which products and applications is WL1801MODGBMOCR used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for WL1801MODGBMOCR
    Manufacturer Part Number Package Notes
    Texas Instruments WL1801MODGBMOCR Module Same device, TI brand
    Texas Instruments WL1837MODGBMOCR Module Dual-band WiFi (2.4/5GHz) + BT 4.1
    Murata LBEE5ZZ1MD Module WiFi/BT module, nRF based, compact
    Espressif ESP32-WROOM-32D Module WiFi/BT SoC, integrated MCU, very popular
    Microchip ATWILC1000-MR110xA Module WiFi only, SPI/SDIO, no BT

    Recommend Parts

    MCP6S26-I

    6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

    Brand: MICROCHIP

    Package: SOIC-14 (150 mils body width)

    IN STOCK: 6800pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    W25Q80VSSI

    8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

    Brand: Winbond

    Package: SOIC-8 208mil (5.3×8.0mm)

    IN STOCK: 4316pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MM3Z9V1

    9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

    Brand: ON

    Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

    IN STOCK: 10735pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    AT89S51

    8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

    Package: PDIP-40 / TQFP-44 / PLCC-44

    IN STOCK: 15000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    GD32F303CBT6

    Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

    Brand: gigadevice

    Package: LQFP-48 (7x7mm, 0.5mm pitch)

    IN STOCK: 3342pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MIC5205-3.3YM5-TR

    3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

    Brand: MICROCHIP

    Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

    IN STOCK: 9858pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1