Opens in a new tab

XC61CN3602MR-G

3.6V voltage detector, CMOS active-low output, SOT-23-5, 1.5uA Iq, Torex

4147

Effective Inventory

Image for reference only

Manufacturer Part:

XC61CN3602MR-G

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XC61CN3602MR-G from Torex Semiconductor is a 3.6V voltage detector (reset IC) with CMOS push-pull output in a SOT-23-5 package. The N suffix indicates active-low CMOS output, 3602 specifies 3.6V detect voltage, M is SOT-23-5 package, R is tape-and-reel, and -G indicates environmental compliance. Voltage detectors monitor power supply rails and generate reset signals when voltage drops below threshold.

Key Specifications

Detect Voltage (VDF) 3.6V (+-2%)
Output Type CMOS push-pull (active-low)
Hysteresis 50 mV (typ)
Supply Current 1.5 uA (typ)
Operating Voltage 0.8V ~ 6.0V
Package SOT-23-5 (2.9 x 1.6 x 1.1 mm)
Operating Temperature -40C to +105C

Features

  • Precision 3.6V detection threshold with +-2% accuracy
  • Ultra-low 1.5uA supply current for always-on monitoring
  • CMOS push-pull output actively drives high and low without pull-up resistor
  • 50mV hysteresis prevents chattering near threshold
  • SOT-23-5 package for minimal board footprint

Applications

  • MCU brown-out detection and reset generation
  • Power supply under-voltage monitoring
  • Battery low-voltage detection
  • System power-on reset timing
Product Introduction: XC61CN3602MR-G Product Introduction

The Torex XC61CN3602MR-G is a 3.6V voltage detector (reset IC) with CMOS push-pull output in a SOT-23-5 package. The device monitors the supply voltage and asserts an active-low reset output when the voltage drops below the 3.6V detection threshold (VDF). When the supply voltage rises above VDF plus hysteresis (typically 50mV), the reset output de-asserts, allowing the monitored system to resume operation. The CMOS push-pull output actively drives both high and low states without requiring an external pull-up resistor, providing clean output transitions. The ultra-low 1.5uA typical supply current enables continuous supply voltage monitoring in battery-powered systems without significantly impacting battery life.

Working Principle: XC61CN3602MR-G Working Principle

The XC61C series uses a precision voltage reference and comparator to monitor the input voltage. When VCC drops below the 3.6V detection voltage (VDF), the output goes low (active-low CMOS). When VCC rises above VDF + hysteresis (typically 50mV), the output returns high. The CMOS push-pull output actively drives both high and low states, providing fast edges without external pull-up resistors. The built-in hysteresis prevents chattering near the threshold voltage, ensuring clean reset signal generation even with slowly varying supply voltages.

Pin Description: XC61CN3602MR-G Pin Definition and Functions
Pin Name Type Function
1 VOUT Output CMOS output (active low)
2 VSS Power Ground
3 VIN Input Voltage sense input (connect to VCC)
Application Scenarios: In which products and applications is XC61CN3602MR-G used
  • MCU brown-out detection and reset generation at 3.6V threshold
  • 3.3V power supply under-voltage monitoring
  • Li-ion battery low-voltage detection and alert
  • System power-on reset timing for 3.3V designs
Alternative Models: What chips are recommended as replacements for XC61CN3602MR-G
Manufacturer Part Number Package Notes
Ricoh R3112N361C-TR-FE SOT-23-5 3.6V detector, same package
TI TLV803EDBVR-3.6 SOT-23-3 3.6V supervisor, smaller package
Richtek RT9818C-36GV SOT-23-5 3.6V voltage detector
Torex XC61EN3602MR-G SOT-23-5 Open-drain output variant

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1