Opens in a new tab

XRP29302ETBTR-L

3A LDO Voltage Regulator, Adjustable 1.25V-16V, 600mV Dropout, TO-263-5

2087

Effective Inventory

Image for reference only

Manufacturer Part:

XRP29302ETBTR-L

Package:

TO-263-5 (D2PAK-5)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XRP29302ETBTR-L from MaxLinear (formerly Exar) is a 3A low dropout voltage regulator with adjustable output from 1.25V to 16V. Featuring 600mV dropout at full 3A load, 1% initial output accuracy, and comprehensive fault protection including overcurrent, reverse battery, and voltage transient immunity. Packaged in a TO-263-5 (D2PAK-5) surface mount format, it serves as a drop-in replacement for the SPX29302 series in high-current power supply applications.

Key Specifications

Output Type Adjustable (1.25V to 16V)
Output Current 3A (guaranteed)
Input Voltage Range 2.25V to 16V
Dropout Voltage 600mV @ 3A
Output Accuracy 1%
Reference Voltage 1.25V
Output Noise 260uVrms
Operating Temperature -40°C to +125°C

Features

  • 3A guaranteed output current with low 600mV dropout
  • 1% initial output voltage accuracy (on-chip trimming)
  • Reverse battery protection
  • Zero current shutdown mode
  • Overcurrent and thermal protection
  • Drop-in replacement for SPX29302

Applications

  • Adjustable power supplies
  • Constant current regulators
  • Audio and video card power
  • Battery chargers
  • Post-regulation for switching supplies
Product Introduction: XRP29302ETBTR-L Product Introduction

The XRP29302ETBTR-L from MaxLinear is a 3A low dropout adjustable voltage regulator designed for low voltage applications requiring fast transient response. The output voltage is adjustable from 1.25V to 16V using an external resistor divider. On-chip trimming achieves 1% initial output voltage accuracy. The device provides comprehensive fault protection including overcurrent, reverse battery, and positive/negative voltage transient immunity. With 600mV dropout voltage at full 3A load and zero-current shutdown mode, it is ideal for battery-powered and high-efficiency applications. The TO-263-5 package enables excellent thermal performance with surface mount assembly.

Working Principle: XRP29302ETBTR-L Working Principle

The XRP29302 uses a PNP pass transistor in a low-dropout configuration. The internal 1.25V bandgap reference is trimmed on-chip for 1% accuracy. An error amplifier compares the feedback voltage (from the ADJ pin) with the internal reference and drives the PNP pass element to maintain the desired output voltage. The output voltage is set by two external resistors: VOUT = 1.25V x (1 + R1/R2) + IADJ x R2. The ENABLE pin provides a zero-current shutdown mode. Overcurrent protection limits the pass transistor current during fault conditions, while thermal shutdown protects against excessive junction temperature.

Pin Description: XRP29302ETBTR-L Pin Definition and Functions
Pin Name Function
1 OUT Regulated output voltage
2 GND Ground
3 IN Unregulated input voltage (2.25V-16V)
4 ADJ Adjustment feedback pin
5 EN Enable/Shutdown (active high)
Application Scenarios: In which products and applications is XRP29302ETBTR-L used
  • Adjustable power supplies for FPGA and processor core voltages
  • Post-regulation after switching converters for low-noise rails
  • Battery charger regulation circuits
  • Audio and video graphics card local power regulation
  • Constant current source applications using the ADJ pin
Alternative Models: What chips are recommended as replacements for XRP29302ETBTR-L
Model Notes
SPX29302 Original Sipex design, drop-in compatible
LT1085CT-ADJ Analog Devices 3A LDO alternative
LM1085IT-ADJ Texas Instruments 3A LDO alternative
LD1085V STMicroelectronics 3A LDO alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1