Opens in a new tab

XTR101AP

4-20mA 2-wire transmitter, on-chip IA, DIP-14

6080

Effective Inventory

Image for reference only

Manufacturer Part:

XTR101AP

Package:

DIP-14 (19.3 x 6.35 mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XTR101AP from Texas Instruments is a precision 4-20mA two-wire current loop transmitter with on-chip instrumentation amplifier, designed for remote sensor signal conditioning.

Key Specifications

Manufacturer Texas Instruments
Output 4-20 mA current loop
Supply Voltage 11.6V to 40V (loop)
Accuracy ±0.1% over temperature
Span Range 16 mA (4 to 20mA)
Input Voltage Range 0 to 1V (adjustable)
Input Offset 30 µV max
Package DIP-14
Operating Temperature -40°C to +85°C

Features

  • Complete 4-20mA transmitter
  • On-chip instrumentation amplifier
  • Two 1mA current sources for sensor excitation
  • Precision span and zero adjust
  • Two-wire loop-powered operation
  • ±0.1% accuracy over temperature

Applications

  • Industrial process control
  • Pressure and temperature transmitters
  • Remote sensor signal conditioning
  • 4-20mA current loop systems
Product Introduction: XTR101AP Product Introduction

The XTR101AP from Texas Instruments is a precision 4-20mA two-wire current loop transmitter with on-chip instrumentation amplifier. It converts low-level sensor signals (0-1V) into standard 4-20mA current loop output. Two on-chip 1mA current sources provide sensor excitation for RTDs or bridges. The two-wire loop-powered design means the signal and power share the same pair, simplifying remote sensor installations.

Working Principle: XTR101AP Working Principle

The XTR101 contains an instrumentation amplifier that amplifies the differential input voltage. The amplified signal drives a voltage-to-current converter that modulates the loop current between 4mA (zero input) and 20mA (full-scale). Two 1mA precision current sources can be used for sensor excitation (RTD, bridge). External resistors set the span and zero. The entire circuit is powered from the loop supply, drawing 4-20mA total.

Pin Description: XTR101AP Pin Definition and Functions
Pin Name Function
1-2 IREF1/IREF2 1mA current source outputs
3-4 IN+/IN- Instrumentation amp inputs
5 Span Span adjust
6-7 Span/Zero External resistor inputs
8,10 E+/E- Loop supply
11-14 Out/Zero Output and zero adjust
Application Scenarios: In which products and applications is XTR101AP used
  • Industrial 4-20mA pressure transmitters
  • Temperature measurement with RTDs
  • Remote sensor signal conditioning
  • Process control current loop interfaces
Alternative Models: What chips are recommended as replacements for XTR101AP
Manufacturer Part Number Notes
TI XTR105P With RTD linearization
TI XTR106P With bridge excitation
ADI AD693AQ Similar current loop transmitter

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1