Opens in a new tab

XTR115UA/2K5

4-20mA current loop transmitter, 5V reg, 2.5V ref, SOIC-8

6500

Effective Inventory

Image for reference only

Manufacturer Part:

XTR115UA/2K5

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The XTR115UA/2K5 from Texas Instruments is a precision 4-20mA current loop transmitter with on-chip 5V regulator and 2.5V reference for industrial sensor signal conditioning in SOIC-8 package.

Key Specifications

Loop Current Range 4 mA to 20 mA
Supply Voltage (Loop) 7.5V to 36V
On-Chip Regulator 5V (for external circuitry)
On-Chip Reference 2.5V precision reference
Span Error +/-0.05% typical
Nonlinearity +/-0.003% typical
Quiescent Current 200 uA typical
Output Current Limit 25 mA (typical)
Package SOIC-8 (UA suffix)
Operating Temperature -40 to +85 C

Features

  • 4-20mA current loop transmitter for industrial sensors
  • On-chip 5V regulator and 2.5V reference for sensor excitation
  • +/-0.003% ultra-low nonlinearity
  • 200uA low quiescent current preserves loop dynamic range
  • 25mA output current limit for fault protection

Applications

  • Industrial 4-20mA current loop sensor transmitter
  • Pressure and temperature sensor signal conditioning
  • Process control instrumentation
  • Remote data acquisition with loop power
  • Two-wire 4-20mA transmitter with HART modem
Product Introduction: XTR115UA/2K5 Product Introduction

The XTR115UA/2K5 from Texas Instruments is a precision 4-20mA current loop transmitter designed for industrial sensor signal conditioning. The device integrates a 5V regulator for powering external sensor circuitry and a precision 2.5V reference for DAC or ADC excitation. The 200uA quiescent current preserves loop dynamic range, allowing the sensor circuitry to consume up to 3.8mA within the 4mA live-zero. The +/-0.003% nonlinearity and +/-0.05% span error provide high-accuracy current transmission. The output current is limited to 25mA for fault protection. The UA/2K5 suffix denotes SOIC-8 package with 2500-unit tape and reel.

Working Principle: XTR115UA/2K5 Working Principle

The XTR115UA/2K5 operates as a precision 4-20mA current loop transmitter. (1) The device converts a voltage input at the IIN pin to a proportional current output on the loop. The internal amplifier and output transistor regulate the loop current so that IOUT = (IIN x 100) + IQ, where IIN is the input current and IQ is the quiescent current (200uA typical). An external resistor sets the input voltage-to-current conversion ratio. The 4mA live-zero is established by the quiescent current, and the 20mA full-scale is reached when the input contributes 16mA. (2) The on-chip 5V regulator (VREG pin) provides up to 3.6mA for powering external circuitry such as op-amps, ADCs, and sensor excitation. The precision 2.5V reference (VREF pin) is used for DAC reference or sensor bridge excitation. Both VREG and VREF are derived from the loop supply, eliminating external regulators. (3) The 25mA output current limit protects against output short circuits and excessive loop current. The 7.5V minimum loop supply voltage ensures the internal circuitry operates correctly while maintaining the loop current. The two-wire configuration powers the transmitter from the loop current itself, requiring no separate power supply.

Pin Description: XTR115UA/2K5 Pin Definition and Functions
Pin Name Function
1 IIN Current input (signal)
2 IRET Reference return (ground for external circuitry)
3 VREG 5V regulator output
4 VREF 2.5V reference output
5 GND Ground
6 LO Limit output (open collector, active low)
7 ET Emitter of output transistor
8 IO Collector of output transistor (loop current)
Application Scenarios: In which products and applications is XTR115UA/2K5 used
  • Industrial 4-20mA current loop sensor transmitter with loop power
  • Pressure and temperature sensor signal conditioning with 5V regulator
  • Process control instrumentation with +/-0.003% nonlinearity
  • Remote data acquisition with two-wire loop power
  • Two-wire 4-20mA transmitter with HART modem overlay
Alternative Models: What chips are recommended as replacements for XTR115UA/2K5
Model Manufacturer Key Difference
XTR116UA/2K5 TI 4.096V reference instead of 2.5V
AD694JNZ ADI Voltage input, 0-20mA, larger pkg
XTR111AIDGQR TI 0-20mA, voltage output, QFN
AD5421BCPZ-RL7 ADI 16-bit DAC, 4-20mA, LFCSP
MAX12900ATJ+ ADI 12-bit DAC, 4-20mA, TSSOP

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1