Opens in a new tab

XTR305IRGWR

4-20mA transmitter, 16-bit DAC, HART FSK, TSSOP-20, +/-0.05%, diagnostics, EEPROM

10341

Effective Inventory

Image for reference only

Manufacturer Part:

XTR305IRGWR

Package:

TSSOP-20 (6.50 x 4.40 x 1.10 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XTR305IRGWR from Texas Instruments is a 4-20mA analog output transmitter with HART modem interface in a TSSOP-20 package. It integrates a precision DAC, V/I converter, and HART FSK coupling for industrial process control 4-20mA loops.

Key Specifications

Output Range 4 mA to 20 mA (current loop)
Output Voltage 0 V to 25 V (voltage mode)
Loop Supply 7.5 V to 36 V
Accuracy +/-0.05% (typical, current mode)
Resolution 16-bit DAC
HART Interface Integrated FSK coupling
Operating Temperature -40C to +85C

Features

  • 4-20mA current output with +/-0.05% accuracy for industrial loops
  • Integrated 16-bit DAC for precise digital-to-analog current conversion
  • HART FSK modem interface for digital communication over the 4-20mA loop
  • Programmable output ranges: 0-20mA, 4-20mA, 0-24mA, and voltage modes
  • Built-in diagnostics: open loop, overtemperature, and output fault detection
  • EEPROM for calibration and configuration data storage

Applications

  • Industrial process control 4-20mA analog output modules
  • HART-enabled field instrument analog output
  • PLC analog output cards with diagnostic capability
  • Valve positioners and actuators with 4-20mA control
Product Introduction: XTR305IRGWR Product Introduction

The XTR305IRGWR from Texas Instruments is a complete 4-20mA analog output transmitter with integrated HART modem interface in a TSSOP-20 package. The device combines a precision 16-bit DAC, voltage-to-current converter, and HART FSK signal coupling circuitry into a single IC, replacing multiple discrete components in traditional 4-20mA output designs. In current mode, the output is programmable over 0-24mA with +/-0.05% typical accuracy, covering the standard 4-20mA loop range with margin for alarm conditions (0mA for open loop, >20mA for high alarm). In voltage mode, the output ranges from 0V to 25V for voltage-mode actuators. The integrated HART FSK coupling allows HART digital communication signals to be superimposed on the 4-20mA analog output, enabling simultaneous analog control and digital communication on a single pair of wires. Built-in diagnostics detect open loop conditions, output driver faults, and overtemperature situations, reporting these to the host via SPI. An internal EEPROM stores calibration coefficients and configuration data, enabling self-contained calibration without external processor intervention.

Working Principle: XTR305IRGWR Working Principle

The XTR305IRGWR integrates a complete 4-20mA output signal chain. (1) 16-bit DAC: The integrated 16-bit DAC converts the digital code from the SPI interface to an analog voltage. The DAC output is buffered and fed to the voltage-to-current converter. (2) V/I Converter: The voltage-to-current converter transforms the DAC output voltage into a proportional output current. The output current is sensed through a precision internal shunt resistor, and a feedback loop maintains accurate current regulation. The output driver is a PNP transistor that sources current from the loop supply to the load. (3) HART Interface: The HART FSK (Frequency Shift Keying) signal is AC-coupled from an external HART modem into the XTR305. The FSK signal modulates the output current at approximately +/-0.5mA peak, superimposing the digital HART communication on the 4-20mA analog signal without affecting the average DC level. (4) Diagnostics: The device monitors output current, loop voltage, and die temperature. If the output current is outside the expected range (open loop or short circuit), or if the die temperature exceeds the limit, a fault flag is set and can be read via SPI.

Pin Description: XTR305IRGWR Pin Definition and Functions
Pin Name Type Function
1 VLOOP Power Loop supply input (7.5-36V)
2 IOUT Output Current output to loop
3 RET Output Return (low-side reference)
4 HARTIN Input HART FSK signal input
5-8 D0-D3 Input SPI data interface
9 SCLK Input SPI clock
10 CS Input Chip select
Application Scenarios: In which products and applications is XTR305IRGWR used
  • Industrial process control 4-20mA analog output modules with 0.05% accuracy
  • HART-enabled field instrument analog output with FSK coupling
  • PLC analog output cards with built-in open loop and fault diagnostics
  • Valve positioners and actuators with 4-20mA control and HART communication
Alternative Models: What chips are recommended as replacements for XTR305IRGWR
Manufacturer Part Number Package Notes
TI XTR111AIDGQR MSOP-10 V/I transmitter, 0-20mA, no HART
TI DAC8750IZAYR TQFP-48 16-bit, 4-20mA, HART
ADI AD5420AREZ TSSOP-24 16-bit, 4-20mA, HART
TI XTR300IRGWR TSSOP-20 Voltage/current output, no DAC

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1