Opens in a new tab

STM32F405RGT6

ARM Cortex-M4 MCU with FPU and DSP, 168 MHz, 1 MB Flash, 192+4 KB SRAM, USB OTG HS/FS, Ethernet, and 15 communication interfaces.

22514

Effective Inventory

Image for reference only

Manufacturer Part:

STM32F405RGT6

Package:

LQFP-64 (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The STM32F405RGT6 by STMicroelectronics is a high-performance ARM Cortex-M4 microcontroller running at 168 MHz with single-precision FPU and DSP instructions, delivering 210 DMIPS via the ART Accelerator for 0-wait-state Flash execution. It features 1 MB Flash, 192+4 KB SRAM (including 64 KB CCM), three 12-bit ADCs at 2.4 MSPS, two 12-bit DACs, 17 timers, and a 16-stream DMA controller. Communication interfaces include 3x I2C, 4x USART, 3x SPI/I2S, 2x CAN, SDIO, USB 2.0 FS/HS OTG, and 10/100 Ethernet MAC with IEEE 1588v2.

Packaged in LQFP-64 (10 x 10 mm) with 51 GPIOs (most 5V-tolerant), the device operates from 1.8V to 3.6V across -40 to +85C. It supports Sleep/Stop/Standby low-power modes with VBAT backup for RTC. Debug via SWD/JTAG with Cortex-M4 ETM. ECOPACK2 compliant, MSL-3, ECCN 3A991.a.2. Product status: Active. Ideal for motor control, industrial automation, USB peripherals, and audio processing applications.

Product Introduction: STM32F405RGT6 Product Introduction

The STM32F405RGT6 is a high-performance ARM Cortex-M4 32-bit RISC microcontroller manufactured by STMicroelectronics, operating at up to 168 MHz with a floating-point unit (FPU) supporting single-precision operations and a full set of DSP instructions. The device features 1 Mbyte of Flash memory, 192 Kbytes of SRAM (including 64 Kbyte CCM data RAM), 4 Kbytes of backup SRAM, and 512 bytes of OTP memory.

The STM32F405RGT6 integrates an ART (Adaptive Real-Time) Accelerator enabling 0-wait-state execution from Flash at 168 MHz, achieving 210 DMIPS performance. On-chip peripherals include three 12-bit ADCs (2.4 MSPS, up to 7.2 MSPS in triple interleaved mode), two 12-bit DACs, up to 17 timers (twelve 16-bit and two 32-bit), a 16-stream DMA controller with FIFOs, and a true random number generator (RNG).

Communication interfaces include up to 3x I2C, 4x USART/2x UART, 3x SPI (42 Mbit/s, 2 with I2S), 2x CAN 2.0B, SDIO, USB 2.0 FS/HS OTG with on-chip PHY, and 10/100 Ethernet MAC with IEEE 1588v2 support. An 8-14 bit parallel camera interface supports up to 54 Mbytes/s. The device also features an LCD parallel interface (8080/6800 modes).

The MCU operates from 1.8V to 3.6V with Sleep, Stop, and Standby low-power modes. VBAT supply supports RTC and backup registers. The device is packaged in a 64-pin LQFP (10 x 10 x 1.4 mm) with 51 GPIOs, many 5V-tolerant. Debug support includes SWD, JTAG, and Cortex-M4 ETM. ECOPACK2 compliant, RoHS compliant, MSL-3. ECCN: 3A991.a.2. Product status: Active.

Working Principle: STM32F405RGT6 Working Principle

The STM32F405RGT6 operates as a high-performance embedded microcontroller with the following subsystem architecture:

1. Cortex-M4 Core with FPU: The 32-bit ARM Cortex-M4 CPU executes at up to 168 MHz with single-precision floating-point unit (FPU) and DSP instruction set. The ART Accelerator caches Flash instructions and branch targets to achieve 0-wait-state execution, delivering 210 DMIPS. An MPU (Memory Protection Unit) provides memory access control for OS-level security.

2. Memory Subsystem: 1 MB Flash with ART Accelerator prefetch, 192 KB SRAM (128 KB main + 64 KB CCM RAM directly coupled to core for deterministic access), 4 KB backup SRAM (VBAT-domain), and 512 bytes OTP. An FSMC (Flexible Static Memory Controller) supports external CF, SRAM, PSRAM, NOR, and NAND memories.

3. Clock and Power Management: Multi-clock source system (4-26 MHz HSE, 16 MHz HSI RC, 32 kHz LSE, 32 kHz LSI) with PLL generating system clocks. Power modes include Run, Sleep, Stop, and Standby. A PVD (Programmable Voltage Detector) monitors supply voltage. VBAT pin powers RTC and backup domain when main supply is absent.

4. Analog Subsystem: Three independent 12-bit ADCs (2.4 MSPS each, 7.2 MSPS triple-interleaved) with up to 24 channels, dual sample-and-hold, and temperature sensor. Two 12-bit DACs for analog output. All analog modules share dedicated VDDA/VSSA supply pins for noise isolation.

5. Timer Subsystem: Up to 17 timers including twelve 16-bit general-purpose timers, two 32-bit timers (up to 168 MHz), two PWM timers for motor control with dead-time generation, two watchdog timers (IWDG, WWDG), and SysTick.

6. Communication Subsystem: Multi-bus matrix connecting APB1 (42 MHz), APB2 (84 MHz), and AHB (168 MHz) domains. Peripherals include 3x I2C, 4x USART + 2x UART, 3x SPI/I2S, 2x CAN, SDIO, USB FS/HS OTG, and Ethernet MAC with DMA and IEEE 1588v2 hardware timestamping.

7. DMA Subsystem: Two DMA controllers with 16 total streams, each with FIFO and burst support, enabling peripheral-to-memory, memory-to-peripheral, and memory-to-memory transfers without CPU intervention.

Pin Description: STM32F405RGT6 Pin Definition and Functions
Pin Group Count Type Description
GPIO (PA-PC) 51 I/O General-purpose I/O, most 5V-tolerant, with alternate function mapping for USART, SPI, I2C, TIM, ADC, etc.
VDD 4 P Digital power supply (1.8-3.6V)
VSS 4 G Digital ground
VDDA / VSSA 2 P/G Analog power supply and ground for ADC/DAC
VBAT 1 P Battery backup supply for RTC and backup domain
VDDUSB 1 P USB transceiver power supply
NRST 1 I System reset (active low, internal pull-up)
BOOT0 1 I Boot mode selection (main Flash / system memory / SRAM)
OSC_IN / OSC_OUT 2 I/O Main oscillator (HSE) pins, 4-26 MHz crystal
OSC32_IN / OSC32_OUT 2 I/O 32.768 kHz LSE oscillator for RTC
Application Scenarios: In which products and applications is STM32F405RGT6 used
Application Description
Motor Control Advanced PWM timers with dead-time generation and encoder interface for BLDC/PMSM motor drives, robotics, and CNC machines
Industrial Automation Multi-channel ADC for sensor acquisition, CAN for fieldbus communication, Ethernet for SCADA connectivity, and DSP for real-time control loops
USB Peripherals Dual USB OTG (FS + HS) for implementing USB devices, hosts, or OTG applications with on-chip PHY for FS and ULPI interface for HS
Audio Processing I2S interfaces with audio PLL for DAC/ADC codec connection, DSP instructions and FPU for real-time audio filtering and effects
Consumer Electronics Camera interface, LCD controller, and high-speed connectivity for smart displays, IoT gateways, and home automation controllers
Alternative Models: What chips are recommended as replacements for STM32F405RGT6
Model Manufacturer Compatibility Key Difference
STM32F407VGT6 ST Series Sibling Same core/memory, adds Ethernet MAC and camera interface; LQFP-100 package with more GPIOs
STM32F415RGT6 ST Series Sibling Same as F405RG with added AES/3DES/MD5/SHA-1 hardware crypto engine
STM32H743VI ST Series Upgrade Cortex-M7 at 480 MHz, 2 MB Flash, 1 MB RAM; higher performance but different pinout
GD32F405RGT6 GigaDevice Pin-Compatible Clone Cortex-M4 at 168 MHz, compatible pinout and software; different manufacturer
LPC4337JBD144 NXP Competitive Alternative Dual-core Cortex-M4/M0, 1 MB Flash; different architecture and pinout

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1