Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » USB2514B-AEZC-TR

USB2514B-AEZC-TR

4-port USB 2.0 Hi-Speed hub controller, MultiTRAK, PHYBoost, 3.3V, QFN-36 (6×6 mm), tape and reel

31494

Effective Inventory

Image for reference only

Manufacturer Part:

USB2514B-AEZC-TR

Package:

QFN-36 (6 x 6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The USB2514B-AEZC-TR is a 4-port USB 2.0 Hi-Speed hub controller from Microchip Technology in a 36-pin QFN (6×6 mm) package. It features MultiTRAK per-port transaction translators for optimal mixed-speed throughput, PortMap and PortSwap for flexible PCB layout, PHYBoost programmable signal drive strength, USB Battery Charging 1.1 CDP support, and 4 kV HBM ESD protection. Operating from a single 3.3V supply with internal 1.2V regulators, it draws 70 mA typical and supports 24 MHz crystal or external clock input. Configurable via I2C EEPROM or SMBus with customizable VID/PID. Extended commercial range: 0°C to +85°C.

Product Introduction: USB2514B-AEZC-TR Product Introduction

The USB2514B-AEZC-TR is a 4-port USB 2.0 Hi-Speed hub controller manufactured by Microchip Technology, belonging to the USB251xB family. It leverages Microchip’s innovative MultiTRAK technology, which provides one transaction translator per downstream port, delivering industry-leading data throughput in mixed-speed USB environments where Hi-Speed, Full-Speed, and Low-Speed devices are connected simultaneously.

The controller supports all three USB 2.0 data rates: 480 Mbps (Hi-Speed), 12 Mbps (Full-Speed), and 1.5 Mbps (Low-Speed). It operates from a single 3.3V supply with internal 1.2V regulators for core logic, and draws approximately 70 mA typical operating current. The device is fully compliant with the USB 2.0 specification and supports USB Battery Charging specification Rev. 1.1 for Charging Downstream Ports (CDP).

Key features include PortMap for flexible port mapping and disable sequencing, PortSwap for programmable USB differential-pair pin locations to simplify PCB layout, and PHYBoost for programmable USB signal drive strength with 4-level resolution to recover signal integrity. The device integrates all USB termination and pull-up/pull-down resistors, supports an onboard 24 MHz crystal driver or external 24/48 MHz clock input, and allows customizable Vendor ID, Product ID, and Device ID via I2C EEPROM or SMBus slave interface.

The USB2514B-AEZC-TR provides 4 kV HBM ESD protection (JESD22-A114F) in both powered and unpowered states, supports self-powered or bus-powered operation, and offers full power management with individual or ganged power control of each downstream port. The -AEZC-TR suffix indicates extended commercial temperature range (0°C to +85°C), QFN package, and tape and reel packaging.

Working Principle: USB2514B-AEZC-TR Working Principle

The USB2514B-AEZC-TR operates as a USB 2.0 Hi-Speed hub controller, expanding a single upstream USB port into four downstream ports with full USB 2.0 compliance.

Upstream Connection: The controller connects to the USB host (upstream) through a differential USB transceiver pair (D+/D-). It negotiates the highest possible speed with the host (up to 480 Mbps Hi-Speed) and handles all USB protocol-level communication including device enumeration, configuration, and power management.

MultiTRAK Transaction Translation: The core innovation is the per-port transaction translator (TT) architecture. In a mixed-speed environment where Hi-Speed and Full-/Low-Speed devices coexist, each downstream port has its own TT. This eliminates the bottleneck of a single shared TT (found in single-TT hubs), allowing Full-Speed and Low-Speed transactions to proceed in parallel across ports without blocking Hi-Speed traffic on other ports.

Downstream Port Management: Each of the four downstream ports implements a full USB 2.0 transceiver with integrated termination resistors. The controller manages port power switching (individual or ganged), over-current detection, and port enable/disable sequencing per the PortMap configuration. The PortSwap feature allows the physical location of D+ and D- pins to be swapped in firmware, enabling direct PCB trace routing to USB connectors without vias or trace crossings.

Configuration and Customization: At power-up, the device reads configuration from an I2C EEPROM (or via SMBus slave interface). This allows OEMs to customize Vendor ID, Product ID, device descriptors, port mapping, power settings, and PHYBoost drive strength levels without changing hardware. If no EEPROM is present, the device operates with default settings.

PHYBoost Signal Integrity: The PHYBoost feature provides 4-level programmable USB signal drive strength per port. In designs with long PCB traces or connectors that degrade signal integrity, the drive strength can be increased to compensate, eliminating the need for external signal conditioning components.

Power Management: The controller supports both bus-powered and self-powered hub configurations. In bus-powered mode, it enforces USB power budget limits. Individual port power control allows selective port shutdown for power savings. The device also supports USB Battery Charging 1.1 CDP mode, where downstream ports can provide up to 1.5 A charging current while simultaneously supporting data transfer.

Clock Architecture: The device includes an on-chip 24 MHz crystal oscillator driver. A low-cost 24 MHz crystal or ceramic resonator provides the reference clock. Alternatively, an external 24 MHz or 48 MHz clock can be fed directly. Internal PLLs multiply the reference to generate the 480 MHz and other internal clock domains required for Hi-Speed USB operation.

Pin Description: USB2514B-AEZC-TR Pin Definition and Functions
Pin Group Pin Name Type Default Function Description
Upstream USB2_DM_U / USB2_DP_U I/O Upstream USB D-/D+ Differential USB 2.0 data pair to USB host; integrated termination resistors
Downstream 1 USB2_DM_D1 / USB2_DP_D1 I/O Downstream Port 1 D-/D+ Differential USB 2.0 data pair for downstream device 1
Downstream 2 USB2_DM_D2 / USB2_DP_D2 I/O Downstream Port 2 D-/D+ Differential USB 2.0 data pair for downstream device 2
Downstream 3 USB2_DM_D3 / USB2_DP_D3 I/O Downstream Port 3 D-/D+ Differential USB 2.0 data pair for downstream device 3
Downstream 4 USB2_DM_D4 / USB2_DP_D4 I/O Downstream Port 4 D-/D+ Differential USB 2.0 data pair for downstream device 4
Configuration SDA / SCL I/O I2C Data / Clock I2C EEPROM interface for configuration storage; also serves as SMBus slave
Clock XTALIN / XTALOUT I/O Crystal Oscillator 24 MHz crystal input/output; or external clock input on XTALIN
Power Control PWR1-PWR4 / OCS1-OCS4 I/O Port Power / Over-Current Active-low power enable and over-current sense for each downstream port
Power VDD33 / VDD12 / GND P/G Power / Ground 3.3V supply, internal 1.2V regulator output, ground
Reset RESET# I Hardware Reset Active-low reset input; initializes hub controller to default state
Misc VBUS_DET I VBUS Detect Detects upstream VBUS presence for bus-powered/self-powered mode selection
Application Scenarios: In which products and applications is USB2514B-AEZC-TR used
Application Description
USB Docking Stations Mobile PC docking stations and port replicators requiring multiple USB 2.0 downstream ports with mixed-speed device support
Monitors and TVs USB hub integration in LCD monitors and smart TVs, providing downstream USB ports for peripherals and media playback
Industrial Systems USB port expansion in PLCs, POS terminals, and embedded controllers where multiple USB devices must connect through a single host port
Set-Top Boxes and DVRs Consumer entertainment devices requiring USB connectivity for external storage, input devices, and firmware updates
Printers and MFPs Multi-function printers providing USB downstream ports for direct camera connection, USB flash drives, and host-side printing
Alternative Models: What chips are recommended as replacements for USB2514B-AEZC-TR
Model Manufacturer Compatibility Key Difference
USB2514Bi-AEZC-TR Microchip Pin-Compatible / Drop-in Industrial temperature range (-40°C to +85°C); same silicon, wider temp spec; preferred for industrial applications
USB2513B-AEZC-TR Microchip Pin-Compatible 3-port variant in the same 36-QFN package; one fewer downstream port; register-configurable port count
USB2512B-AEZC-TR Microchip Pin-Compatible 2-port variant in the same 36-QFN package; fewest downstream ports; same footprint for PCB commonality
USB2514B-M2 Microchip Pin-Compatible Newer production flow (M2 mask revision); recommended for new designs; identical functionality
TUSB2046B TI Functionally Similar 4-port USB 2.0 hub, single TT architecture, 48-pin TQFP; larger package, no MultiTRAK; different pinout

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NUC029LAN

ARM Cortex-M0 MCU, 50MHz, 64KB Flash, 4KB SRAM, dual UART/SPI/I2C, LQFP-48

Brand: Nuvoton

Package: LQFP-48 (7.0 x 7.0 x 1.45 mm)

IN STOCK: 12385pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT45DB081E-SHN-T

8Mbit DataFlash, dual-SPI 85MHz, 2x264B SRAM buffers, USON-8 (4x3mm), page-based ECC

Brand: Renesas

Package: USON-8 (4 x 3 x 0.6mm, 0.8mm pitch)

IN STOCK: 4500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1