The MAX232DR from Texas Instruments is a dual RS-232 driver/receiver in SOIC-16 package that operates from a single 5V supply using integrated charge pump circuitry to generate TIA/EIA-232-F voltage levels. The device includes two drivers and two receivers, supporting data rates up to 120 kbps with full-duplex operation. Each driver converts TTL/CMOS input levels to TIA/EIA-232-F levels (typical output swing plus/minus 9V), and each receiver converts RS-232 inputs to 5V TTL/CMOS levels with 1.3V typical threshold and 0.5V hysteresis. Receivers accept up to plus/minus 30V input levels. The charge pump requires only four external 1uF capacitors. Typical supply current: 8mA. ESD protection exceeds 2kV HBM per JESD 22. Operating temperature: 0C to 70C. Supply range: 4.5V to 5.5V. MSL-1, RoHS3, EAR99. Tape and reel, 2500/reel.
Home » Integrated Circuits ICs, Interface ICs » MAX232DR
MAX232DR
Dual RS-232 driver/receiver, 2TX/2RX, 120kbps, 5V single supply, charge pump, SOIC-16, 0~70C
Effective Inventory
Manufacturer Part:
MAX232DR
Package:
SOIC-16 (9.9 x 3.91 x 1.58 mm)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: MAX232DR Product Introduction
The MAX232DR from Texas Instruments is a dual RS-232 driver/receiver housed in a 16-pin SOIC package, operating from a single 5V supply with integrated capacitive charge pump circuitry that generates the TIA/EIA-232-F voltage levels (typically plus/minus 9V output) without requiring external dual supplies.
The device contains two independent drivers and two independent receivers, providing full-duplex communication capability at data rates up to 120 kbps. Each driver converts TTL/CMOS logic levels (0 to 5V) into RS-232 compliant voltage levels, while each receiver converts RS-232 input levels into TTL/CMOS compatible outputs. The receivers feature a typical threshold of 1.3V with 0.5V hysteresis for noise immunity, and can accept input voltages up to plus/minus 30V.
The internal charge pump uses a voltage doubler and voltage inverter, requiring only four external 1uF capacitors (C1+, C1-, C2+, C2-) to generate the plus and minus supplies needed for RS-232 output levels. The V+ pin (pin 2) outputs approximately 2xVCC (about 10V), and the V- pin (pin 6) outputs approximately -2xVCC (about -10V). These generated voltages are used internally by the drivers and should not be used to power external circuits beyond a small bypass capacitor.
The MAX232DR is one of the most widely used RS-232 interface ICs in the electronics industry, found in virtually every device that requires serial communication via RS-232. The DR suffix denotes SOIC-16 package with tape and reel packaging (2,500 units per reel). The device is RoHS3 compliant, MSL Level 1 (unlimited), and classified as EAR99. Note that TI lists MAX232D as discontinued, with MAX232DR as the recommended replacement with plus/minus 2kV ESD protection.
Working Principle: MAX232DR Working Principle
The MAX232DR operates as a dual-channel RS-232 level translator, converting between TTL/CMOS logic levels (0-5V) and TIA/EIA-232-F voltage levels (plus/minus 5V to plus/minus 15V) using an integrated charge pump to generate the required high-voltage rails from a single 5V supply.
Charge Pump Operation: The internal charge pump consists of two stages. The first stage is a voltage doubler that uses an external capacitor (C1) to double the VCC supply, producing approximately 2xVCC (about 10V) at the V+ output (pin 2). The second stage is a voltage inverter that uses another external capacitor (C2) to invert the V+ voltage, producing approximately -2xVCC (about -10V) at the V- output (pin 6). Two additional external capacitors (C3, C4) serve as energy storage for the V+ and V- rails respectively. All four capacitors are typically 1uF (non-polarized ceramic recommended). During each charge pump cycle, the internal oscillator alternately charges and transfers charge between the capacitors, maintaining the V+ and V- supplies at the required levels for RS-232 output compliance.
Driver Operation: Each driver takes a TTL/CMOS logic input (T1IN or T2IN) and converts it to an RS-232 compliant output (T1OUT or T2OUT). When the input is logic HIGH (greater than 2.4V), the output swings toward V- (typically -8.5V). When the input is logic LOW (less than 0.8V), the output swings toward V+ (typically +8.5V). Note that the driver inverts the signal: a HIGH TTL input produces a negative RS-232 voltage (mark), and a LOW TTL input produces a positive RS-232 voltage (space), which is the correct polarity for RS-232 communication. The driver output impedance is typically 300 ohms, and the output is current-limited for short-circuit protection.
Receiver Operation: Each receiver takes an RS-232 input (R1IN or R2IN) and converts it to a TTL/CMOS logic output (R1OUT or R2OUT). The receiver has a switching threshold of approximately 1.3V with 0.5V hysteresis. Input voltages above the threshold are interpreted as logic LOW on the output (inverted), while input voltages below the threshold are interpreted as logic HIGH. The hysteresis provides noise immunity against signal reflections and ground potential differences common in RS-232 cables. The receiver inputs can accept plus/minus 30V without damage, providing robust protection against voltage spikes common in long cable runs.
Signal Flow in Typical Application: The UART TXD output (TTL) connects to T1IN; T1OUT drives the RS-232 cable (DB9 pin 3). The RS-232 cable (DB9 pin 2) connects to R1IN; R1OUT drives the UART RXD input (TTL). This provides bidirectional level translation between the microcontroller and the RS-232 serial port.
Pin Description: MAX232DR Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | C1+ | Passive | Positive terminal of charge pump capacitor C1; connect to pin 3 (C1-) through 1uF capacitor |
| 2 | V+ | Output | Positive charge pump output; approximately +2xVCC (about +10V); for storage capacitor only, do not use as external supply |
| 3 | C1- | Passive | Negative terminal of charge pump capacitor C1; connect to pin 1 (C1+) through 1uF capacitor |
| 4 | C2+ | Passive | Positive terminal of charge pump capacitor C2; connect to pin 5 (C2-) through 1uF capacitor |
| 5 | C2- | Passive | Negative terminal of charge pump capacitor C2; connect to pin 4 (C2+) through 1uF capacitor |
| 6 | V- | Output | Negative charge pump output; approximately -2xVCC (about -10V); for storage capacitor only |
| 7 | T2OUT | Output | Driver 2 RS-232 output; connects to remote RS-232 system; swings between V+ and V- |
| 8 | R2IN | Input | Receiver 2 RS-232 input; from remote RS-232 system; accepts up to plus/minus 30V |
| 9 | R2OUT | Output | Receiver 2 TTL/CMOS output; to UART RXD; inverts RS-232 input polarity |
| 10 | T2IN | Input | Driver 2 TTL/CMOS input; from UART TXD; inverts to RS-232 output |
| 11 | T1IN | Input | Driver 1 TTL/CMOS input; from UART TXD; logic HIGH produces negative RS-232 output |
| 12 | R1OUT | Output | Receiver 1 TTL/CMOS output; to UART RXD; 1.3V threshold with 0.5V hysteresis |
| 13 | R1IN | Input | Receiver 1 RS-232 input; from remote RS-232 system; accepts up to plus/minus 30V |
| 14 | T1OUT | Output | Driver 1 RS-232 output; connects to DB9 pin 3 (TXD); swings between V+ and V- |
| 15 | GND | Power | Ground; connect to system ground plane |
| 16 | VCC | Power | Supply voltage; 4.5V to 5.5V; bypass with 0.1uF ceramic capacitor to GND |
Application Scenarios: In which products and applications is MAX232DR used
| Application | Description |
|---|---|
| UART Serial Communication | Level translation between MCU UART (TTL 0-5V) and RS-232 serial port (plus/minus 12V); single 5V supply eliminates need for external dual-rail power |
| Industrial Serial Interfaces | RS-232 communication in industrial equipment, PLCs, and CNC machines; plus/minus 30V receiver input tolerance withstands noise in factory environments |
| Debug/Programming Ports | Console and debug serial ports on embedded systems; RS-232 level conversion for development boards and evaluation modules |
| Modems and Terminals | TIA/EIA-232-F compliant interface for legacy modems, terminals, and peripherals; 120kbps data rate supports standard serial communication speeds |
| Battery-Powered Systems | Low 8mA typical supply current; single 5V operation; charge pump eliminates bulky dual-rail power supplies in portable equipment |
Alternative Models: What chips are recommended as replacements for MAX232DR
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| MAX202DR | TI | Pin-Compatible | Enhanced ESD protection (15kV HBM vs 2kV); uses 0.1uF charge pump caps instead of 1uF; same SOIC-16 pinout |
| MAX3232DR | TI | Functionally Similar | 3.3V supply version; wider voltage range (3.0-5.5V); 250kbps data rate; different charge pump cap values |
| ST3232DR | ST | Pin-Compatible | 3.0-5.5V supply range; 250kbps; STMicro equivalent; check ESD specs for critical applications |
| SP3232EEN | MaxLinear | Pin-Compatible | 3.3V RS-232 transceiver; 250kbps; plus/minus 15kV ESD HBM; SOIC-16 |
| ADM3202ARNZ | ADI | Pin-Compatible | 3.3V dual RS-232 transceiver; 460kbps data rate; 0.1uF charge pump caps; SOIC-16 |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







