The LM393MX/NOPB from Texas Instruments is a dual low-power low-offset voltage comparator in an 8-pin SOIC package. It features a wide supply voltage range of 2 V to 36 V (single or ±1 V to ±18 V dual), very low supply current of 0.4 mA independent of supply voltage, input common-mode voltage range including ground, low input bias current of 25 nA, maximum offset voltage of ±5 mV, open-collector output compatible with TTL/CMOS, and 1.3 µs response time. Operating temperature range is 0°C to 70°C. Applications include limit comparators, oscillators, voltage detectors, and logic-level translators.
Home » Analog Linear ICs, Integrated Circuits ICs » LM393MX/NOPB
LM393MX/NOPB
Dual comparator, 2-36V, 0.4mA Iq, 5mV Vos, open-collector, SOIC-8, 0~70°C
Effective Inventory
Manufacturer Part:
LM393MX/NOPB
Package:
SOIC-8 (D) (4.9 x 6.0 x 1.75 mm, 1.27mm pitch)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: LM393MX/NOPB Product Introduction
The LM393MX/NOPB is a dual low-power precision voltage comparator from Texas Instruments, part of the LM193-N series. It contains two independent comparators in a single 8-pin SOIC package, designed to operate from a single 2-V to 36-V supply or dual ±1-V to ±18-V supplies.
The defining characteristic of the LM393 is the input common-mode voltage range that includes ground, even when operating from a single positive supply. This allows the comparator to sense signals at or near ground without requiring a negative supply rail — a critical advantage in single-supply battery-powered and automotive systems.
The PNP input stage provides low input bias current (25 nA typ) and low input offset current (±5 nA), making the LM393 suitable for high-impedance sensor interfaces. The maximum input offset voltage is ±5 mV over temperature, adequate for most threshold detection applications.
The open-collector output can sink up to 16 mA and is compatible with TTL, DTL, ECL, MOS, and CMOS logic levels. The open-collector architecture enables wired-OR connections and level shifting between different voltage domains. A pull-up resistor to the desired logic supply sets the output high level.
The supply current is only 0.4 mA for both comparators combined, independent of supply voltage magnitude. This makes the LM393 one of the most power-efficient general-purpose comparators available, ideal for battery-operated equipment.
The LM393MX/NOPB is the SOIC-8 tape-and-reel version rated for 0°C to 70°C commercial temperature range. The /NOPB suffix indicates lead-free (Pb-free) RoHS-compliant packaging with Sn lead finish, MSL-1 unlimited floor life.
Working Principle: LM393MX/NOPB Working Principle
**PNP Input Stage:** Each comparator uses a PNP differential input pair. The PNP structure allows the input common-mode range to extend to ground (0 V) and slightly below (-0.3 V max), which is the key advantage over NPN-input comparators. The input bias current flows out of the input pins (typically 25 nA), setting a minimum source impedance requirement for accurate threshold detection.
**Open-Collector Output:** The output stage is an NPN open-collector transistor that can only sink current to ground. When the inverting input exceeds the non-inverting input, the output transistor turns on (output low, saturation voltage 250 mV at 4 mA). When the non-inverting input is higher, the output transistor turns off and the output floats high via an external pull-up resistor. This allows the output high level to be set independently from the supply voltage, enabling level shifting.
**Comparison Operation:** The comparator has no internal feedback (unlike an op-amp), so it operates in open loop. Any voltage difference between inputs exceeding the offset voltage drives the output to one rail. The typical response time is 1.3 µs for a 5-mV overdrive, making it suitable for moderate-speed signal detection.
**Power Supply:** The LM393 operates from a single 2-36V supply or dual ±1-18V supplies. The supply current (0.4 mA) is essentially constant across the full voltage range because the internal bias network is self-regulating. There is no quiescent current difference between the two output states.
Pin Description: LM393MX/NOPB Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | 1OUT | O | Comparator 1 output; open-collector; requires external pull-up resistor to logic supply; can sink up to 16 mA; saturation voltage 250 mV at 4 mA; compatible with TTL/CMOS |
| 2 | 1IN- | I | Comparator 1 inverting input; input bias current 25 nA typ (flows out of pin); common-mode range 0 V to V+−1.5 V; differential input range up to 36 V |
| 3 | 1IN+ | I | Comparator 1 non-inverting input; same electrical characteristics as 1IN- |
| 4 | GND | P | Ground / negative supply; connect to system ground for single-supply operation; connect to negative supply for dual-supply operation |
| 5 | 2IN+ | I | Comparator 2 non-inverting input; independent from comparator 1 |
| 6 | 2IN- | I | Comparator 2 inverting input; independent from comparator 1 |
| 7 | 2OUT | O | Comparator 2 output; open-collector; same characteristics as 1OUT |
| 8 | V+ | P | Positive supply; 2 V to 36 V; bypass with 0.1 µF ceramic placed close to pin; supply current 0.4 mA typ (both comparators) |
Application Scenarios: In which products and applications is LM393MX/NOPB used
| Application | Description |
|---|---|
| Battery Low-Voltage Detector | Compare battery voltage divider output with a Zener or bandgap reference on the other input; open-collector output drives LED indicator or MCU interrupt; ground-sensing input range monitors cells near 0V; 0.4mA Iq minimizes battery drain |
| Window Comparator | Use both comparators with different thresholds to create over-voltage/under-voltage window detector; wire-OR open-collector outputs for single fault flag; commonly used in power supply monitoring and protection circuits |
| Square-Wave Oscillator | Build a relaxation oscillator using one comparator with positive feedback (hysteresis) and an RC timing network; frequency set by R-C values and hysteresis resistors; useful for clock generation and tone generation |
| Zero-Crossing Detector | Detect AC mains zero crossings for TRIAC/SSR phase-angle control; ground-inclusive input range allows direct sensing of rectified AC near zero; open-collector output interfaces to MCU GPIO at 3.3V or 5V logic level |
Alternative Models: What chips are recommended as replacements for LM393MX/NOPB
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| LM393DT | ST | Pin-Compatible | Same SOIC-8 pinout and function; STMicro variant; -40~105°C extended temp range; slightly different Vos spec; drop-in replacement |
| LM2903DR | TI | Pin-Compatible, Automotive | Same SOIC-8 pinout; -40°C to 85°C industrial range; functionally identical; AEC-Q100 qualified variant available; use for automotive applications |
| TL331BIDBVR | TI | Functional Equivalent, Single | Single-channel comparator (not dual); SOT-23-5 (smaller); push-pull output (no pull-up needed); 40ns faster response; use when only one comparator needed and board space is limited |
| LMV393IDR | TI | Functional Equivalent, Low-Voltage | Dual comparator; 2.7-5.5V supply only (not 36V); lower Iq (120µA); rail-to-rail input; SOT-23-8 available; use for low-voltage battery-powered designs |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







