The SP3232EEY-L from MaxLinear (formerly Sipex) is a 2-driver/2-receiver RS-232 transceiver operating from a single +3.0-V to +5.5-V supply. It features an integrated high-efficiency charge pump requiring only four 0.1-µF external capacitors, true EIA/TIA-232-F compliance, 120-kbps minimum data rate, and enhanced ESD protection (±15-kV HBM, ±8-kV IEC 61000-4-2 contact discharge). The -L suffix denotes the TSSOP-16 package rated for -40°C to +85°C. Supply current is 0.3 mA typical at no load. Applications include notebook computers, industrial controllers, and embedded RS-232 interfaces.
Home » Integrated Circuits ICs, Interface ICs » SP3232EEY-L
SP3232EEY-L
RS-232 2Tx/2Rx, 3.0-5.5V, 120kbps, charge pump 4×0.1µF, ±15kV ESD HBM, TSSOP-16, -40~85°C
Effective Inventory
Manufacturer Part:
SP3232EEY-L
Package:
TSSOP-16 (5.0 x 6.4 x 1.1 mm, 0.65mm pitch)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: SP3232EEY-L Product Introduction
The SP3232EEY-L is a true RS-232 transceiver from MaxLinear’s SP3232E series, providing 2 drivers and 2 receivers in a single TSSOP-16 package. It is designed for portable and handheld applications requiring RS-232 communication from 3.3-V or 5-V logic supplies.
The integrated charge pump doubles and inverts the supply voltage to generate the ±5.4-V (typical) RS-232 output levels required by EIA/TIA-232-F, using only four 0.1-µF external capacitors. This is a significant improvement over older designs requiring 1-µF capacitors, reducing board area and cost.
The device meets all EIA/TIA-232-F specifications with a minimum data rate of 120 kbps under full 3-kΩ/1000-pF load, sufficient for standard serial communication up to 115.2 kbps with margin. The driver output swing exceeds ±5.0 V with a 3-kΩ load, ensuring compatibility with all standard RS-232 receivers.
ESD protection is a standout feature: ±15-kV Human Body Model, ±15-kV IEC 61000-4-2 air discharge, and ±8-kV IEC 61000-4-2 contact discharge on all RS-232 pins. This eliminates the need for external TVS diodes in most applications, simplifying the BOM.
The EEY-L suffix denotes: E = enhanced ESD version, Y = TSSOP-16 package, -L = -40°C to +85°C industrial temperature range, tape and reel. The SP3232E does not include shutdown or tri-state features (those are on the SP3222E variant). Supply current is 0.3 mA typical at no load with 3.3-V supply, making it suitable for always-on serial ports in battery-powered devices.
Working Principle: SP3232EEY-L Working Principle
**Charge Pump (Voltage Doublers):** The SP3232E uses a regulated dual charge pump to generate RS-232 voltage levels from a single 3.0-5.5-V supply. The first stage is a voltage doubler (C1 charge pump) that produces V+ ≈ 2 × VCC from the C1+/C1- pins. The second stage is a voltage inverter (C2 charge pump) that produces V- ≈ -2 × VCC from the C2+/C2- pins. A V+ storage capacitor (C3) and V- storage capacitor (C4) smooth the outputs. Regulation limits V+ and V- magnitudes to approximately 5.5 V to prevent exceeding RS-232 maximums.
**Driver Stage:** Each driver converts TTL/CMOS logic levels (0.8-V low, 2.4-V high thresholds) to RS-232 levels (±5.4-V swing typical). When the logic input is high, the output swings negative; when low, the output swings positive (inverting). The output is current-limited and can drive a 3-kΩ load with 1000-pF cable capacitance.
**Receiver Stage:** Each receiver converts RS-232 input levels (±3-V to ±15-V range) to TTL/CMOS logic levels. The input threshold is 0.8-V TTL compatible with 0.5-V typical hysteresis for noise immunity. A 5-kΩ pull-down resistor to ground on each receiver input ensures a defined logic-high output when the RS-232 cable is disconnected.
Pin Description: SP3232EEY-L Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | C1+ | I/O | Charge pump capacitor C1 positive terminal; connect 0.1µF ceramic to C1- (pin 3) |
| 2 | V+ | P | Doubled positive voltage output (~5.4V); connect 0.1µF storage capacitor to GND |
| 3 | C1- | I/O | Charge pump capacitor C1 negative terminal |
| 4 | C2+ | I/O | Charge pump capacitor C2 positive terminal; connect 0.1µF ceramic to C2- (pin 5) |
| 5 | C2- | I/O | Charge pump capacitor C2 negative terminal |
| 6 | V- | P | Inverted negative voltage output (~-5.4V); connect 0.1µF storage capacitor to GND |
| 7 | T2OUT | O | Driver 2 RS-232 output; swings ±5.4V typical; connects to RS-232 cable |
| 8 | R2IN | I | Receiver 2 RS-232 input; accepts ±15V range; 5kΩ internal pull-down to GND |
| 9 | R2OUT | O | Receiver 2 TTL/CMOS output; VCC-referenced logic level; drives UART RX |
| 10 | T2IN | I | Driver 2 TTL/CMOS input; connects to UART TX; inverting to RS-232 output |
| 11 | T1IN | I | Driver 1 TTL/CMOS input; connects to UART TX |
| 12 | R1OUT | O | Receiver 1 TTL/CMOS output; drives UART RX |
| 13 | R1IN | I | Receiver 1 RS-232 input; accepts ±25V absolute max; 5kΩ pull-down |
| 14 | T1OUT | O | Driver 1 RS-232 output; swings ±5.4V typical |
| 15 | GND | G | Ground; connect to PCB ground plane; charge pump returns through this pin |
| 16 | VCC | P | Supply voltage 3.0-5.5V; bypass with 0.1µF ceramic close to pin |
Application Scenarios: In which products and applications is SP3232EEY-L used
| Application | Description |
|---|---|
| Embedded MCU RS-232 Port | Interface 3.3V MCU UART to RS-232 serial port; charge pump generates ±5.4V from 3.3V supply; only 4 external 0.1µF caps needed; ±15kV ESD protection eliminates external TVS; 120kbps supports standard 115.2kbaud with margin |
| Industrial Controller Communication | Provide RS-232 debug/programming port on 3.3V or 5V industrial controller; -40~85°C range covers industrial environments; ESD protection handles cable hot-plug transients; TSSOP-16 fits space-constrained boards |
| Portable Instrument Serial Link | Enable RS-232 data download from 3.3V battery-powered instrument; 0.3mA no-load Iq minimizes battery drain; 0.1µF charge pump caps minimize board area; always-on receiver detects incoming connection without enable control |
Alternative Models: What chips are recommended as replacements for SP3232EEY-L
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| MAX3232CUE | ADI (Maxim) | Pin-Compatible | Same TSSOP-16 pinout; same 3.0-5.5V supply; 250kbps (faster); 0.1µF caps; ±15kV ESD; industry-standard alternative; widely available |
| SP3232EBCA-L | MaxLinear | Pin-Compatible, Same Series | Same function in SSOP-16 package (wider body); different package land pattern; same electrical specs; use when SSOP preferred over TSSOP |
| ST3232EBTR | ST | Pin-Compatible | TSSOP-16; 3.0-5.5V; 400kbps (faster); 0.1µF caps; ±15kV ESD; ST second source; use for supply chain diversification |
| SP3222ECA-L | MaxLinear | Functional Upgrade | Same family with shutdown mode (1µA Iq); 20-pin SSOP/TSSOP; EN and SHDN pins; use when shutdown capability needed for ultra-low-power standby |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







