The TLV1117IDCYR from Texas Instruments is an 800-mA, adjustable and fixed-output LDO linear regulator in a 4-pin SOT-223 (DCY) package (6.5 x 3.5 mm). The ‘I’ suffix indicates -40°C to +125°C industrial temperature range. Input voltage range is 2.7 V to 15 V. The adjustable version outputs 1.25 V to 13.8 V via external resistor divider (VREF = 1.25 V). Fixed versions available in 1.5V, 1.8V, 2.5V, 3.3V, and 5V. Dropout voltage is 1.3 V max at 800 mA. The new-chip fixed version features 60-µA IQ, internal soft-start, foldback current limit, and ±1% output accuracy. The adjustable version has 5-mA typical IQ and requires 1.7-mA minimum load. Designed as an enhanced AMS1117/AMS1117-3.3 replacement with improved accuracy and protection.
Home » Integrated Circuits ICs, Low Dropout Regulators (LDO) » TLV1117IDCYR
TLV1117IDCYR
800mA LDO, 2.7-15V in, 1.25-13.8V adj out, 1.3V Vdo@800mA, SOT-223, -40~125°C, soft-start (fixed)
Effective Inventory
Manufacturer Part:
TLV1117IDCYR
Package:
SOT-223 (DCY) (6.5 x 3.5 x 1.7 mm, 2.3mm pitch, tab = VOUT pin 2)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: TLV1117IDCYR Product Introduction
The TLV1117 is an 800-mA LDO regulator from TI that serves as an enhanced, pin-compatible replacement for the ubiquitous AMS1117 and LM1117 series. The device supports input voltages from 2.7 V to 15 V, covering the common 3.3-V, 5-V, and 12-V supply rails found in consumer, industrial, and medical electronics.
The TLV1117 is available in both adjustable (1.25-13.8 V via external divider) and fixed-output (1.5V, 1.8V, 2.5V, 3.3V, 5V) versions. The IDCYR suffix specifically denotes the industrial-temperature adjustable version in SOT-223 tape-and-reel packaging. TI has updated the TLV1117 with a ‘new chip’ revision for fixed-output versions that significantly improves performance: quiescent current drops from 5 mA to 60 µA, output accuracy improves from ±3.75% to ±1%, and internal soft-start and foldback current limit are added.
For the adjustable version (TLV1117IDCYR), the output voltage is set by two external resistors: VOUT = 1.25 V × (1 + R1/R2). A minimum load of 1.7 mA (typical) must be maintained for stable regulation; this can be provided by the feedback resistor network. A minimum 10-µF tantalum output capacitor is required for stability; modern designs can substitute a 10-µF ceramic with appropriate ESR.
The SOT-223 (DCY) package is the industry-standard footprint for 800-mA LDOs, enabling direct drop-in replacement of AMS1117-3.3, LM1117-3.3, and LD1117 designs. The thermal tab (pin 2) is connected to VOUT and serves as the primary heat-dissipation path. The RθJA of 95.4°C/W (new chip, DCY) limits practical power dissipation to approximately 1 W without a thermal pad, corresponding to a 1.25-V dropout at 800 mA.
Key differentiators over the generic AMS1117 include: ±1% accuracy (fixed, new chip) vs ±2-3%; 60-µA IQ (fixed, new chip) vs 5-10 mA; internal soft-start (fixed, new chip) eliminating inrush current; and foldback current limit (fixed, new chip) reducing power dissipation during faults.
Working Principle: TLV1117IDCYR Working Principle
**Pass Transistor and Error Amplifier:** The TLV1117 uses a PNP pass transistor in an NPN/PNP Darlington configuration, which is the source of the relatively high 1.3-V dropout voltage (the PNP must maintain VBE + VCE(sat) across the pass element). The error amplifier compares the feedback voltage (from the internal divider for fixed, or external divider for adjustable) with the 1.205-V bandgap reference, driving the Darlington base to maintain regulation.
**Adjustable Output Configuration:** For the TLV1117IDCYR (adjustable), the ADJ/GND pin connects to the junction of external resistors R1 (VOUT to ADJ) and R2 (ADJ to GND). The ADJ pin sources ~50 µA of bias current, which creates a small error proportional to R2. The output voltage is VOUT = VREF × (1 + R1/R2) + IADJ × R2.
**New-Chip Enhancements (Fixed Versions):** The new chip revision replaces the NPN/PNP Darlington with a PMOS pass element for fixed-output versions, dramatically reducing IQ from 5 mA to 60 µA and enabling true shutdown with 1.5-µA IQ. The internal soft-start gradually ramps the output voltage, limiting inrush current. The foldback current limit reduces the current limit during output shorts (from 800 mA to ~200 mA), dramatically reducing power dissipation during faults: PD = VIN × IFOLDBACK instead of (VIN – VOUT) × ILIMIT.
**Thermal Protection:** An internal thermal shutdown circuit disables the output when junction temperature exceeds ~165°C, with ~10°C hysteresis. This prevents irreversible damage during sustained overloads.
Pin Description: TLV1117IDCYR Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | GND/ADJ | G/I | Adjustable: feedback adjust pin; connect to R1/R2 divider junction; Fixed: ground connection; pin function depends on version |
| 2 | VOUT (Tab) | O | Regulated output; thermal tab is electrically VOUT; solder tab to PCB copper pour for heat dissipation; max 800mA; bypass with ≥10µF |
| 3 | VIN | P | Input supply; 2.7V to 15V; bypass with 10µF ceramic; input voltage must exceed VOUT + VDO at max load |
| 4 | VOUT | O | Regulated output (parallel with pin 2/tab); both pins 2 and 4 must be connected together on PCB |
Application Scenarios: In which products and applications is TLV1117IDCYR used
| Application | Description |
|---|---|
| 3.3V/5V System Power Rail | Regulate 5V or 12V supply to 3.3V at 500-800mA for MCU, sensors, and peripherals; SOT-223 footprint is industry-standard; drop-in AMS1117 replacement with better accuracy and protection; use fixed-voltage version for lowest IQ |
| Battery-Powered Consumer Device | Regulate 9V or 12V battery to 5V/3.3V at 200-500mA; new-chip fixed version IQ of 60µA extends battery life in standby; soft-start prevents voltage overshoot on hot-plug |
| Industrial Sensor Module | Generate custom voltage (1.25-13.8V) from 12V/15V supply using adjustable version; external resistors set precise output; industrial temperature range -40 to 125°C; foldback current limit (fixed) protects during field faults |
Alternative Models: What chips are recommended as replacements for TLV1117IDCYR
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| AMS1117-3.3 | Advanced Monolithic Systems | Pin-Compatible Legacy | Original industry-standard 800mA LDO; SOT-223; 5mA IQ; ±2% accuracy; no soft-start; TLV1117 is the upgraded replacement with better specs |
| TLV1117LV33DCYR | TI | Series Upgrade | Lower VDO (400mV@500mA); lower IQ (200µA); 5.5V max input; SOT-223; use for lower-dropout applications below 5.5V input |
| LD1117S33TR | ST | Competitive Alternative | 800mA 3.3V LDO; SOT-223; 1.1V dropout@800mA; 5mA IQ; -40 to 125°C; similar to legacy TLV1117; use as ST-source alternative |
| NCV1117LT33T3G | onsemi | Competitive Alternative | 800mA 3.3V LDO; SOT-223; automotive AEC-Q100 qualified; -40 to 125°C; use for automotive applications |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







