The TLC271CDR from Texas Instruments is a single LinCMOS programmable low-power operational amplifier in an 8-pin SOIC package. It operates from a single supply of 3 V to 16 V and features a unique bias-select mode that allows the user to trade off power consumption vs. AC performance. Key specs include 1.7-MHz GBW and 3.6-V/µs slew rate (high-bias mode), 10-mV max input offset voltage, 60-pA max input bias current, 25-nV/√Hz noise, and 80-dB typical CMRR. Input common-mode range extends 300 mV below the negative rail. Output swings to within 30 mV of the negative rail. Power dissipation 725 mW. Operating temperature range is 0°C to +70°C (C-suffix). The ‘R’ suffix denotes tape-and-reel packaging.
Home » Analog Linear ICs, Integrated Circuits ICs » TLC271CDR
TLC271CDR
Single LinCMOS op-amp, 3-16V, 1.7MHz GBW, 3.6V/µs SR, 60pA Ib, bias-select, SOIC-8, 0~70°C
Effective Inventory
Manufacturer Part:
TLC271CDR
Package:
SOIC-8 (D) (4.9 x 3.9 x 1.58 mm, 1.27mm pitch)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: TLC271CDR Product Introduction
The TLC271CDR is a single operational amplifier from TI’s LinCMOS family, built on a silicon-gate CMOS process that provides the input characteristics of CMOS (extremely high input impedance, picoampere bias currents) with better offset voltage stability than conventional metal-gate CMOS op-amps. The LinCMOS technology achieves offset voltage drift of only 0.1 µV/month (including the first 30 days), far superior to the 10-100 µV/month typical of metal-gate CMOS.
The key differentiator of the TLC271 is the bias-select mode, controlled by the BIAS pin (pin 8). Three modes are available: High-Bias (BIAS pin to VDD+) for maximum bandwidth (1.7 MHz) and slew rate (3.6 V/µs); Low-Bias (BIAS pin to VDD-) for minimum power consumption (typical 10 µA supply current); and Medium-Bias (BIAS pin open or mid-voltage) for intermediate performance. This allows a single part to serve both high-performance and micropower applications.
In high-bias mode, the TLC271 offers 1.7-MHz GBW and 3.6-V/µs slew rate — competitive with bipolar op-amps like the LM358 — while consuming only 675 µA per channel. In low-bias mode, supply current drops to approximately 10 µA, suitable for always-on battery-powered circuits, at the expense of reduced bandwidth (~5 kHz) and slew rate.
The input common-mode voltage range extends 300 mV below the negative rail, enabling the TLC271 to sense signals at or below ground in single-supply systems. The output swings to within 30 mV of the negative rail (under light load), and within 1.2 V of the positive rail. The 60-pA maximum input bias current (0°C to 70°C) is orders of magnitude lower than bipolar op-amps, making the TLC271 suitable for high-impedance sensor interfaces (pH probes, photodiodes, piezoelectric transducers).
Three offset voltage grades are available: TLC271 (10 mV), TLC271A (5 mV), and TLC271B (2 mV). The C-suffix denotes commercial temperature range (0°C to 70°C); I-suffix covers -40°C to 85°C; M-suffix covers -55°C to 125°C. The TLC271 is in the process of being discontinued (per TI product page), so new designs should consider the TLC27L1 or TLV271 as replacements.
Working Principle: TLC271CDR Working Principle
**LinCMOS Input Stage:** The TLC271 uses a differential input pair of P-channel MOSFETs fabricated on TI’s silicon-gate LinCMOS process. The MOSFET gates present virtually infinite DC input impedance (10^12 Ω typical), resulting in picoampere-level input bias current. The silicon-gate process provides more stable threshold voltages than metal-gate CMOS, resulting in the 0.1-µV/month offset voltage drift specification.
**Bias-Select Operation:** The BIAS pin (pin 8) controls an internal current mirror that sets the tail current for the differential pair and the bias current for subsequent stages. In high-bias mode (BIAS = VDD+), the tail current is maximized, providing maximum gm (transconductance) and therefore maximum bandwidth and slew rate. In low-bias mode (BIAS = VDD-), the tail current is minimized, reducing gm and bandwidth but cutting supply current to ~10 µA. This is a unique feature not found in most op-amps.
**CMOS Output Stage:** The output uses a CMOS push-pull (PMOS pull-up, NMOS pull-down) configuration. The NMOS pull-down provides strong sinking capability to the negative rail (within 30 mV), while the PMOS pull-up limits the positive output swing to VDD – 1.2 V. The output can drive loads as low as 600 Ω (limited by output current capability of ~10 mA).
**ESD and Latch-Up Protection:** Internal ESD protection diodes on all pins prevent damage up to 2000 V (HBM per MIL-STD-883C, Method 3015.2). The input/output structures are designed to withstand -100-mA surge currents without latch-up, a critical concern in CMOS devices.
Pin Description: TLC271CDR Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | NC | – | No internal connection; leave floating |
| 2 | IN- | I | Inverting input; 60pA max bias current; common-mode range extends -0.3V below negative rail |
| 3 | IN+ | I | Non-inverting input; same characteristics as IN-; differential input voltage up to supply voltage |
| 4 | VDD- | G | Negative supply / ground; connect to GND for single-supply operation; output swings to within 30mV of this pin |
| 5 | NC | – | No internal connection; leave floating |
| 6 | OUT | O | Amplifier output; swings VDD- +30mV to VDD+ -1.2V; drives up to 10mA; use feedback from OUT to IN- for closed-loop operation |
| 7 | VDD+ | P | Positive supply; 3V to 16V; bypass with 0.1µF ceramic to VDD- |
| 8 | BIAS | I | Bias-select control; connect to VDD+ for high-bias mode (1.7MHz GBW, 675µA IQ); connect to VDD- for low-bias mode (~10µA IQ); leave open or mid-voltage for medium-bias mode |
Application Scenarios: In which products and applications is TLC271CDR used
| Application | Description |
|---|---|
| High-Impedance Sensor Interface | Amplify signals from pH probes, photodiodes, or piezoelectric sensors; 60pA input bias current eliminates loading of high-impedance sources; low-bias mode for continuous monitoring with µA power consumption; use transimpedance or charge amplifier configuration |
| Battery-Powered Analog Front-End | Signal conditioning for portable instruments; low-bias mode draws ~10µA for always-on monitoring; switch to high-bias mode only during measurement for 1.7MHz bandwidth; 3V minimum supply operates from single Li-ion cell |
| Single-Supply Active Filter | Implement Sallen-Key or MFB filters from 3V-16V single supply; high-bias mode provides 1.7MHz GBW for filters up to ~150kHz; output swings to near ground; CMOS inputs simplify high-impedance filter networks |
Alternative Models: What chips are recommended as replacements for TLC271CDR
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| TLV271IDR | TI | Recommended Replacement | Single CMOS op-amp; 3-16V; 3MHz GBW; 2.8V/µs SR; rail-to-rail output; no bias-select pin; SOIC-8; use for new designs replacing TLC271 |
| TLC27L1CDR | TI | Series Variant (Low-Power) | Ultra-low-power version; 33µA IQ; 100kHz GBW; 0.04V/µs SR; same SOIC-8 pinout (pin 8 is NC); use when low-bias TLC271 performance is sufficient and dedicated low-power part preferred |
| MCP6001T-I/SN | Microchip | Competitive Alternative | Single CMOS op-amp; 1.8-6V; 1MHz GBW; rail-to-rail I/O; 100µA IQ; SOT-23-5; smaller package; use for low-voltage rail-to-rail applications |
| TLV2462CDR | TI | Functional Upgrade | Dual low-power op-amp; 2.7-6V; 6.4MHz GBW; rail-to-rail output; 500µA/ch; shutdown mode; use for higher bandwidth low-power designs |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







