Opens in a new tab

LP2951ACM

100mA adjustable LDO, 2.3V-30V input, 380mV dropout, shutdown + error flag, SOIC-8

4380

Effective Inventory

Image for reference only

Manufacturer Part:

LP2951ACM

Package:

SOIC-8 (5 x 3.98 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LP2951ACM from Texas Instruments is a 100mA, 30V low-dropout voltage regulator with adjustable output from 1.24V to 29V. It features a shutdown pin, error flag output, 75uA quiescent current, and 380mV typical dropout voltage, housed in an 8-pin SOIC package for industrial applications.

Key Specifications

Manufacturer Texas Instruments
Output Type Adjustable (1.24V ~ 29V)
Output Current 100mA
Input Voltage Range 2.3V ~ 30V
Dropout Voltage 380mV (typ) @ 100mA
Quiescent Current 75uA (typ)
Reference Voltage 1.235V
Line Regulation 0.03% (typ)
Load Regulation 0.04% (typ)
Package SOIC-8
Operating Temperature -40°C ~ 125°C

Features

  • Wide input voltage range: 2.3V to 30V
  • Adjustable output: 1.24V to 29V via external resistor divider
  • Low quiescent current: 75uA typical
  • Low dropout voltage: 380mV typical at 100mA
  • Shutdown pin for power conservation
  • Error flag output indicates output voltage status
  • Current limiting and thermal shutdown protection
  • Stable with ceramic output capacitors (1uF to 100uF)

Applications

  • Battery-powered instruments and portable devices
  • Industrial control and automation systems
  • Automotive electronics and after-market modules
  • Power supply sequencing using error and shutdown pins
  • Low-power microcontroller supply regulation
Product Introduction: LP2951ACM Product Introduction

The Texas Instruments LP2951ACM is a micropower low-dropout voltage regulator capable of supplying up to 100mA of load current with an input voltage range of 2.3V to 30V. The output voltage is adjustable from 1.24V to 29V using an external resistor divider. The device features an extremely low quiescent current of 75uA typical, making it ideal for battery-powered applications where supply current must be minimized. A shutdown pin allows the regulator to be turned off, reducing supply current to near zero. The error flag output provides an early warning when the output voltage drops below regulation, useful for power supply sequencing and supervision. The regulator is stable with ceramic output capacitors from 1uF to 100uF.

Working Principle: LP2951ACM Working Principle

The LP2951ACM operates as a series-pass linear regulator with several control and monitoring features: 1) Voltage Regulation Core: The bandgap reference produces a stable 1.235V that is compared with the feedback voltage by the error amplifier. The pass transistor is driven to maintain the output at the programmed voltage. 2) Shutdown Control: The SHUTDOWN pin, when driven above 2V, disables the regulator and reduces input current to near zero. When driven below 0.8V, normal operation resumes. 3) Error Flag: The ERROR output goes low when the feedback voltage drops below approximately 92.5% of the nominal value, providing a dropout warning. This is useful for microprocessor reset or power-fail detection. 4) Protection: Internal current limiting and thermal shutdown protect the device from damage under overload or excessive power dissipation conditions.

Pin Description: LP2951ACM Pin Definition and Functions
Pin Name Type Function
1 VOUT Output Regulated output voltage
2 SENSE Input Output voltage sense (tie to VOUT for fixed mode)
3 SHUTDOWN Input Regulator shutdown control (active high)
4 GND Ground Ground connection
5 ERROR Output Error flag output (active low, open collector)
6 FEEDBACK Input Feedback input (tie to VTAP for fixed mode)
7 VTAP Output Internal resistor tap (tie to FEEDBACK for fixed mode)
8 VIN Input Unregulated input voltage (2.3V to 30V)
Application Scenarios: In which products and applications is LP2951ACM used
  • Battery-powered instruments requiring long operating life with low quiescent current
  • Industrial control systems needing wide input voltage range regulation
  • Power supply sequencing using error flag and shutdown control
  • Automotive after-market modules operating from 12V or 24V systems
  • Microcontroller and sensor power regulation in low-power designs
Alternative Models: What chips are recommended as replacements for LP2951ACM
Manufacturer Part Number Package Notes
TI LP2951ACM/NOPB SOIC-8 Same device, full orderable part
TI LP2951ACMDR SOIC-8 Tape and reel version
TI LP2950AC-5.0 TO-92 Fixed 5V, 3-pin version
Microchip MCP1703AT-5002E/MC SOT-23-3 250mA, 5V fixed, 2V-16V input
onsemi NCP511SN25T1G TSOP-5 150mA, adjustable, 16V max

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1