Opens in a new tab

MCP6042T-I/SN

Dual 600nA micropower RRIO op-amp, 14kHz GBW, 1.4V-6.0V, 1pA Ibias, SOIC-8

4560

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6042T-I/SN

Package:

8-SOIC (3.9 x 4.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP6042T-I/SN from Microchip Technology is a dual-channel, 600nA micropower rail-to-rail input/output operational amplifier. With a gain-bandwidth product of 14kHz and operating voltage from 1.4V to 6.0V, it is optimized for ultra-low-power battery-powered and portable applications in an SOIC-8 package.

Key Specifications

Manufacturer Microchip Technology
Amplifier Type General Purpose, Rail-to-Rail I/O
Number of Channels 2
Gain-Bandwidth Product 14 kHz
Slew Rate 0.003 V/us
Input Bias Current 1 pA (typ)
Input Offset Voltage 3 mV (max)
Supply Voltage 1.4V ~ 6.0V
Supply Current 600 nA per amplifier (typ)
Package 8-SOIC (3.9 x 4.9mm)
Operating Temperature -40°C ~ 85°C

Features

  • Ultra-low quiescent current: 600nA per amplifier (typical)
  • Rail-to-rail input and output swing
  • Wide supply voltage range: 1.4V to 6.0V
  • Gain-bandwidth product: 14kHz
  • Unity-gain stable
  • Low input bias current: 1pA typical
  • ESD protection on all pins: 4kV HBM
  • Dual-channel in compact SOIC-8 package

Applications

  • Battery current monitoring and sensing
  • Wearable health and fitness devices
  • Temperature measurement and sensor conditioning
  • Toll booth tags and RFID systems
  • Portable instrumentation and data loggers
Product Introduction: MCP6042T-I/SN Product Introduction

The Microchip Technology MCP6042T-I/SN is a dual-channel, ultra-low-power operational amplifier that draws only 600nA per amplifier from a supply voltage as low as 1.4V. The rail-to-rail input and output capability allows the amplifier to handle signals that span the full supply range, making it ideal for single-supply battery-powered applications. The very low input bias current of 1pA and wide common-mode range support high-impedance sensor interfaces. With a gain-bandwidth product of 14kHz, the MCP6042 is optimized for low-frequency applications such as battery current monitoring, sensor signal conditioning, and wearable device analog front ends. The device is unity-gain stable and available in standard SOIC-8 packaging.

Working Principle: MCP6042T-I/SN Working Principle

The MCP6042 operates as a dual CMOS operational amplifier optimized for micropower applications: 1) Input Stage: The rail-to-rail input stage uses complementary P-channel and N-channel differential pairs that cover the full supply voltage range from VSS-0.3V to VDD+0.3V, with ultra-low 1pA input bias current from CMOS gate leakage. 2) Gain Stage: The internal voltage gain stage provides 110dB open-loop gain, ensuring good DC precision despite the 3mV maximum input offset voltage. 3) Output Stage: The rail-to-rail CMOS output stage can swing from VSS to VDD with light loads, and drives up to 20mA for heavier loads. The 14kHz gain-bandwidth product and 0.003V/us slew rate are optimized for ultra-low 600nA supply current, making the device suitable for DC and low-frequency signal processing.

Pin Description: MCP6042T-I/SN Pin Definition and Functions
Pin Name Type Function
1 VOUTA Output Output of amplifier A
2 VINA- Input Inverting input of amplifier A
3 VINA+ Input Non-inverting input of amplifier A
4 VSS Power Negative supply / Ground
5 VINB+ Input Non-inverting input of amplifier B
6 VINB- Input Inverting input of amplifier B
7 VOUTB Output Output of amplifier B
8 VDD Power Positive supply (1.4V to 6.0V)
Application Scenarios: In which products and applications is MCP6042T-I/SN used
  • Battery current monitoring in portable and wearable electronics
  • Temperature sensor signal conditioning with RTD or thermistor
  • Wearable health and fitness monitoring devices
  • Toll booth tags, RFID readers, and low-power wireless systems
  • Portable data loggers and environmental monitoring instruments
Alternative Models: What chips are recommended as replacements for MCP6042T-I/SN
Manufacturer Part Number Package Notes
Microchip MCP6041T-I/OT SOT-23-5 Single channel version
Microchip MCP6044T-I/SL 14-TSSOP Quad channel version
Microchip MCP6142T-E/SN 8-SOIC G=+10 stable, similar power
TI TLV8542D 8-SOIC 770nA, 5.5V, dual RRIO
ST TSU102IPT MiniSO-8 550nA, dual RRIO op-amp

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1