Opens in a new tab

LD1117S50CTR

800mA LDO, 5.0V fixed, 1V dropout, +-1% accuracy, 75dB PSRR, SOT-223

13200

Effective Inventory

Image for reference only

Manufacturer Part:

LD1117S50CTR

Package:

SOT-223-4 (6.5 x 3.5 x 1.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LD1117S50CTR from STMicroelectronics is a low-drop positive voltage regulator providing a fixed 5.0V output at up to 800mA. It features 1V typical dropout voltage, +-1% output accuracy at 25C, 75dB supply voltage rejection, and NPN pass transistor for high efficiency, in a SOT-223 surface-mount package.

Key Specifications

Manufacturer STMicroelectronics
Output Voltage 5.0V (fixed)
Output Current 800mA
Input Voltage Range 6.5V to 15V
Dropout Voltage 1.0V typ, 1.2V max @ 800mA
Output Accuracy +-1% at 25C
Quiescent Current 5mA typ (into load)
PSRR 75dB typ @ 120Hz
Output Noise 100uVrms (10Hz-10kHz)
Package SOT-223-4
Operating Temperature 0C to +125C

Features

  • Low dropout voltage: 1V typical at 800mA
  • Output current up to 800mA (1.3A peak)
  • Fixed 5.0V output with +-1% accuracy at 25C
  • NPN pass transistor for high efficiency
  • Supply voltage rejection: 75dB typical
  • Internal current limiting and thermal shutdown
  • Only 10uF output capacitor required for stability
  • Available in +-1% and +-2% tolerance grades
  • Pin-compatible with standard 1117 regulators

Applications

  • 5V power supply regulation
  • Battery-powered equipment
  • Post-regulation for switching supplies
  • Embedded system power rails
  • Consumer electronics
Product Introduction: LD1117S50CTR Product Introduction

The STMicroelectronics LD1117S50CTR is a low-drop positive voltage regulator capable of providing up to 800mA of output current at a fixed 5.0V. The NPN pass transistor ensures high efficiency since the quiescent current flows mostly into the load, unlike PNP-based LDOs. The on-chip trimming allows the regulator to achieve very tight output voltage tolerance of +-1% at 25C. With a typical dropout voltage of only 1V at 800mA, the LD1117 is suitable for applications where the input-to-output voltage differential is limited. A minimum 10uF output capacitor is required for stability. The device includes internal current limiting and thermal shutdown protection for reliable operation.

Working Principle: LD1117S50CTR Working Principle

The LD1117S50CTR operates as a series-pass linear regulator using an NPN pass transistor topology: 1) Reference and Error Amplifier: A bandgap voltage reference generates a stable internal reference voltage. The error amplifier continuously compares the output feedback with this reference and drives the NPN pass transistor to maintain the output at 5.0V. 2) NPN Pass Element: Unlike PNP-based LDOs, the NPN pass transistor draws its base current from the input supply, and the quiescent current flows into the load rather than to ground. This results in higher efficiency, especially at lighter loads. The dropout voltage is determined by the VCE(sat) of the NPN transistor, typically 1V at 800mA. 3) Protection: Internal current limiting prevents excessive output current, and thermal shutdown protects the device from overheating during fault conditions.

Pin Description: LD1117S50CTR Pin Definition and Functions
Pin Name Type Function
1 GND/ADJ Ground Ground terminal (fixed 5V version)
2 VOUT Output Regulated 5.0V output; internally connected to tab
3 VIN Input Unregulated input voltage (6.5V to 15V)
4 (Tab) VOUT Output Thermal tab connected to VOUT
Application Scenarios: In which products and applications is LD1117S50CTR used
  • 5V power regulation from 6.5V-15V sources in embedded systems
  • Post-regulation after switching converters for low-noise 5V rails
  • Battery-powered equipment requiring efficient 5V regulation
  • Consumer electronics and computer peripheral power supplies
  • Industrial control systems with 9V or 12V input sources
Alternative Models: What chips are recommended as replacements for LD1117S50CTR
Manufacturer Part Number Package Notes
ST LDL1117S50R SOT-223 Newer, 1.2A, higher PSRR version
TI LM1117MPX-5.0/NOPB SOT-223 800mA, 5V, +-1% accuracy
onsemi NCP1117ST50T3G SOT-223 1A, 5V LDO
TI TLV1117LV50DCYR SOT-223 1.5A, lower Iq, newer
Microchip MCP1825S-5002E/DB SOT-223 500mA, 5V, low Iq

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1