Opens in a new tab

LMR16030PDDAR

60V 3A buck converter, 40uA Iq, 200k-2.5MHz, internal comp, HSOIC-8 PowerPAD

9890

Effective Inventory

Image for reference only

Manufacturer Part:

LMR16030PDDAR

Package:

8-HSOIC with PowerPAD (4.89 x 3.90 x 1.55mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMR16030PDDAR from Texas Instruments is a SIMPLE SWITCHER 60V, 3A step-down buck converter with 40uA quiescent current, integrated high-side MOSFET, 200kHz-2.5MHz adjustable switching frequency, and internal loop compensation in an 8-pin HSOIC package with PowerPAD.

Key Specifications

Manufacturer Texas Instruments
Topology Buck (Step-Down)
Output Current 3A
Input Voltage Range 4.3V to 60V
Output Voltage Range 0.8V to 50V (adjustable)
Switching Frequency 200kHz to 2500kHz (adjustable)
Quiescent Current 40uA (sleep mode)
Shutdown Current 1uA
Min On-Time 90ns
Max Duty Cycle 97%
Package 8-HSOIC with PowerPAD (4.9 x 3.9mm)
Operating Temperature -40C to +125C

Features

  • 60V maximum input voltage
  • 3A output current with integrated high-side MOSFET
  • 40uA ultra-low quiescent current in sleep mode
  • 1uA shutdown current for battery life extension
  • 200kHz to 2.5MHz adjustable switching frequency
  • Internal loop compensation
  • Precision enable input for power sequencing
  • Cycle-by-cycle current limit
  • Output overvoltage protection
  • Thermal shutdown protection
  • Power good output

Applications

  • Industrial power supply regulation
  • Automotive battery-powered systems
  • Telecom and networking equipment
  • Battery-powered instruments
  • General-purpose step-down conversion
Product Introduction: LMR16030PDDAR Product Introduction

The Texas Instruments LMR16030PDDAR is a 60V, 3A SIMPLE SWITCHER step-down regulator with an integrated high-side MOSFET. The wide 4.3V to 60V input range makes it suitable for industrial and automotive applications with unregulated power sources. The 40uA quiescent current in sleep mode extends battery life in always-on systems, while the 1uA shutdown current minimizes drain during standby. The adjustable switching frequency from 200kHz to 2.5MHz allows optimization for either efficiency or external component size. Internal loop compensation simplifies design and minimizes external components. Protection features include cycle-by-cycle current limit, thermal shutdown, and output overvoltage protection. The PowerPAD package provides excellent thermal performance.

Working Principle: LMR16030PDDAR Working Principle

The LMR16030PDDAR operates as a current-mode buck converter with four key subsystems: 1) Power Stage: The integrated N-channel high-side MOSFET switches at the programmed frequency, storing energy in the external inductor during on-time and releasing it through the external catch diode during off-time. The 90ns minimum on-time enables high-frequency operation at high step-down ratios. 2) Control Loop: Current-mode control with internal compensation regulates the output voltage by comparing the feedback voltage (0.8V reference) with the internal reference and adjusting the peak switch current. The internal compensation eliminates the need for external RC networks. 3) Frequency Control: An external resistor from the FB pin to ground sets the switching frequency (200kHz-2.5MHz), allowing optimization of efficiency versus component size. 4) Protection: Cycle-by-cycle current limiting, output overvoltage protection, and thermal shutdown protect the device and system. The precision enable input provides adjustable UVLO and power sequencing.

Pin Description: LMR16030PDDAR Pin Definition and Functions
Pin Name Type Function
1 BOOT Capacitor Bootstrap capacitor for high-side driver
2 VIN Power Input supply (4.3V to 60V)
3 EN Input Enable (precision threshold, adjustable UVLO)
4 FB Input Feedback (0.8V reference) and frequency set
5 PG Output Power good (open-drain)
6 GND Ground Ground and PowerPAD
7 EP Ground Exposed pad (connect to GND plane)
8 SW Output Switch output (connect to inductor)
Application Scenarios: In which products and applications is LMR16030PDDAR used
  • 12V/24V/48V industrial bus to 5V/3.3V point-of-load conversion
  • Automotive battery-powered systems with 40uA sleep current
  • Telecom 48V input step-down regulation
Alternative Models: What chips are recommended as replacements for LMR16030PDDAR
Manufacturer Part Number Package Notes
TI LMR16030SDDAR VSON-8 Same function, SON package
TI LMR16020PDDAR HSOIC-8 60V, 2A version
TI LMR23630ADDAR HSOIC-8 36V, 3A, automotive
Monolithic Power MP8759GD-Z QFN-8 60V, 3A, similar

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1