Opens in a new tab

TPS62095RGTR

4A Synchronous Buck Converter, 2.5-5.5V in, adjustable out, DCS-Control, VQFN-16

2287

Effective Inventory

Image for reference only

Manufacturer Part:

TPS62095RGTR

Package:

VQFN-16 (3.0 x 3.0 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPS62095RGTR from Texas Instruments is a 4A synchronous step-down (buck) converter featuring DCS-Control topology for excellent load transient performance. It operates from 2.5V to 5.5V input with adjustable output from 0.8V to VIN. The device achieves 95% efficiency with 20uA quiescent current in power save mode, packaged in a 3x3mm VQFN-16.

Key Specifications

Topology Buck (synchronous step-down)
Input Voltage Range 2.5V to 5.5V
Output Voltage 0.8V to VIN (adjustable)
Output Current 4A maximum
Switching Frequency 1.4MHz
Quiescent Current 20uA typical
Efficiency Up to 95%
Operating Temperature -40C to +85C
Package VQFN-16 (3x3mm)

Features

  • DCS-Control topology for fast transient response
  • Pin-to-pin compatible with TPS62090
  • 95% converter efficiency
  • 20uA operating quiescent current
  • 100% duty cycle for lowest dropout
  • Adjustable soft-start and output voltage tracking
  • Power good output
  • Two-level short circuit protection
  • Output discharge function

Applications

  • Notebook and computer power
  • Solid state and hard disk drives
  • Processor core voltage supply
  • Battery-powered applications
  • Point-of-load regulation
Product Introduction: TPS62095RGTR Product Introduction

The TPS62095RGTR from Texas Instruments is a 4A synchronous step-down converter optimized for high efficiency and small solution size. Using DCS-Control topology, it achieves excellent load transient performance with accurate output voltage regulation. The device operates from 2.5V to 5.5V input with adjustable output from 0.8V to VIN, making it ideal for point-of-load regulation in notebooks, SSDs, and battery-powered systems. The 20uA quiescent current in power save mode and 95% peak efficiency minimize power loss across the entire load range.

Working Principle: TPS62095RGTR Working Principle

The TPS62095RGTR uses Texas Instruments’ DCS-Control (Direct Control with Seamless transition) topology combining voltage-mode and current-mode control. In PWM mode at heavy loads, the device operates at a fixed 1.4MHz switching frequency with current-mode control for precise regulation. At light loads, it seamlessly transitions to power save mode with reduced switching frequency while maintaining output regulation. The 100% duty cycle capability allows the high-side switch to stay on continuously when the input voltage approaches the output, minimizing dropout. The adjustable soft-start controls output voltage ramp-up, and the power good output indicates regulation status. Output tracking allows coordinated power sequencing with other rails.

Pin Description: TPS62095RGTR Pin Definition and Functions
Pin Name Type Function
1-2 SW Output Switch node (inductor connection)
3 DEF Control Default output voltage setting
4 PG Output Power good (open drain)
5 FB Input Feedback voltage for output regulation
6 AGND Power Analog ground
7 CP Connect Charge pump flying capacitor (+)
8 CN Connect Charge pump flying capacitor (-)
9 SS Control Soft-start capacitor connection
10 AVIN Power Analog supply input
11-12 PVIN Power Power supply input
13 EN Control Enable (active high)
14-15 PGND Power Power ground
16 VOS Input Output voltage sense
Application Scenarios: In which products and applications is TPS62095RGTR used
  • Notebook and laptop computer core voltage supply
  • Solid state drive (SSD) and hard disk drive power
  • Processor and DSP point-of-load regulation
  • Battery-powered portable device power management
  • Industrial and telecom distributed power systems
Alternative Models: What chips are recommended as replacements for TPS62095RGTR
Manufacturer Part Number Package Notes
Texas Instruments TPS62090RGTR VQFN-16 Pin-compatible predecessor
Texas Instruments TPS62130RGTR VQFN-16 3A version, wider Vin (17V)
onsemi NCP3235AMNTXG QFN-16 5A buck converter alternative
Infineon IR3827MTRPBF PQFN-16 4A integrated buck regulator

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NUC029LAN

ARM Cortex-M0 MCU, 50MHz, 64KB Flash, 4KB SRAM, dual UART/SPI/I2C, LQFP-48

Brand: Nuvoton

Package: LQFP-48 (7.0 x 7.0 x 1.45 mm)

IN STOCK: 12385pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1