Opens in a new tab

LM567CMX

Tone Decoder PLL, 0.01Hz-500kHz, 100mA output sink, VSSOP-8

8674

Effective Inventory

Image for reference only

Manufacturer Part:

LM567CMX

Package:

VSSOP-8 (3.0 x 3.0 x 1.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM567CMX from Texas Instruments is a general-purpose tone decoder PLL designed to detect a specific frequency tone within a 20:1 frequency range. It features a logic-compatible output capable of sinking 100 mA, adjustable bandwidth from 0 to 14%, and high out-of-band signal rejection. The device operates from 4.75 V to 9 V supply in an 8-pin VSSOP package.

Key Specifications

Type Tone Decoder / Phase-Locked Loop
Supply Voltage 4.75 V to 9 V
Frequency Range 0.01 Hz to 500 kHz
Frequency Ratio Range 20:1
Output Sink Current 100 mA
Bandwidth 0 to 14% (adjustable)
Input Sensitivity 20 mV rms (typical)
Supply Current 8 mA (typical)
Package VSSOP-8 (3.0 x 3.0 mm)
Operating Temperature 0°C to 70°C

Features

  • 20 to 1 frequency range with a single external resistor
  • Logic-compatible output with 100 mA current sinking capability
  • Bandwidth adjustable from 0 to 14%
  • High rejection of out-of-band signals and noise
  • Immunity to false signals
  • Inherent immunity to AM signals
  • Simultaneous tone and frequency decoding
  • Adjustable reference voltage for quadrature detector

Applications

  • Touch-tone decoding and DTMF detection
  • Carrier current remote control
  • Frequency monitoring and detection
  • Ultrasonic remote control systems
  • Communications tone signaling
Product Introduction: LM567CMX Product Introduction

The LM567CMX from Texas Instruments is a general-purpose tone decoder that uses a phase-locked loop (PLL) architecture to detect a specific frequency tone. It can detect tones from 0.01 Hz to 500 kHz with a 20:1 frequency range using a single external resistor. The output is a logic-compatible open-collector transistor capable of sinking 100 mA. Bandwidth is adjustable from 0 to 14% of the center frequency via an external capacitor. The device provides high out-of-band signal rejection and immunity to false triggering, making it ideal for tone signaling and frequency detection in communication and control systems.

Working Principle: LM567CMX Working Principle

The LM567CMX uses a phase-locked loop (PLL) architecture consisting of a voltage-controlled oscillator (VCO), a phase detector, an amplifier, and an output driver. The VCO center frequency is set by external timing resistor (R1) and capacitor (C1) according to f0 = 1/(1.1 x R1 x C1). When an input signal at or near the VCO frequency is applied, the PLL locks and the output transistor turns on (sinks current). The loop filter capacitor (C2) at pin 2 determines the detection bandwidth. With input signals below 200 mV rms, bandwidth is calculated from the C2 value and input amplitude. Above 200 mV rms, bandwidth depends on the product of f0 and C2. The output at pin 8 is an open-collector NPN transistor that sinks up to 100 mA when a valid tone is detected.

Pin Description: LM567CMX Pin Definition and Functions
Pin Name Type Function
1 Output Filter (C3) I/O Output filter capacitor
2 Loop Filter (C2) I/O Loop filter / bandwidth control
3 Input Input Signal input
4 VCC Power Power supply (4.75-9V)
5 Timing (R1) I/O VCO timing resistor
6 Timing (C1) I/O VCO timing capacitor
7 GND Ground Ground
8 Output Output Detection output (open collector, 100mA sink)
Application Scenarios: In which products and applications is LM567CMX used
  • DTMF and touch-tone telephone decoding
  • Carrier current and power-line remote control receivers
  • Frequency monitoring and alarm systems
  • Ultrasonic and acoustic signaling detection
  • FSK and tone-based data communication
Alternative Models: What chips are recommended as replacements for LM567CMX
Manufacturer Part Number Package Notes
Texas Instruments LM567CN DIP-8 Through-hole version
Texas Instruments LMC567CM SOIC-8 CMOS low-power version
onsemi NE567N DIP-8 Pin-compatible tone decoder
NXP 74HC946 SOIC-16 PLL tone decoder, different pinout
Microchip MCP2030 QFN-20 Analog front-end for LF receivers

Recommend Parts

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F030RCT6

48MHz Cortex-M0 MCU, 256KB Flash, 32KB SRAM, 51 I/O, 16ch 12-bit ADC, 6 USART, LQFP-64

Brand: ST

Package: LQFP-64 (10 x 10 x 1.4mm)

IN STOCK: 3450pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P87C15SBAA

80C51 8-bit MCU, 16KB Flash, 512B RAM, 20MHz, QFP-44 package

Brand: NXP

Package: LQFP-44 / SBAA (10 x 10 x 1.4 mm)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC3S400A-4FTG256C

Spartan-3A FPGA, 400K gates, 90nm, 16x 18×18 multipliers, 256-pin FTBGA, commercial -4 speed grade

Brand: Amd

Package: FTG256 FineLine BGA (17×17 mm)

IN STOCK: 39784pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ34NPBF

N-Channel HEXFET power MOSFET, 60V, 30A, 0.04 Ohm, TO-220

Brand: infineon

Package: TO-220AB (15.5 x 10.67 mm, through-hole)

IN STOCK: 10367pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

Brand: TI

Package: TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

IN STOCK: 15840pcs

Cargo cycle: 3-7 Days

The minimum order is 1