Opens in a new tab

DRV8601DRBR

400mA Haptic Driver for ERM/LRA, 2.5-5.5V, 100us startup, VSON-8

8763

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8601DRBR

Package:

VSON-8 (3.0 x 3.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DRV8601DRBR is a haptic driver from Texas Instruments optimized for driving DC motors (ERM) and linear resonant actuators (LRA). It features differential output drive with up to 400mA output current from a 3.3V supply. The device offers ultra-fast 100us turn-on time, low 1.7mA quiescent current, and 10nA shutdown current, making it ideal for portable and battery-powered haptic feedback applications.

Key Specifications

Motor Type ERM (DC Motor), LRA (Linear Vibrator)
Supply Voltage 2.5V to 5.5V
Output Current 400mA
Input Signal Analog, PWM
Startup Time 100us
Quiescent Current 1.7mA typical
Shutdown Current 10nA typical
Output Configuration Differential
Operating Temperature -40C to +85C
Package VSON-8 (3x3mm)

Features

  • Drives both ERM and LRA haptic actuators
  • 400mA output from 3.3V supply
  • Ultra-fast 100us startup time
  • Near rail-to-rail output swing
  • Differential output for bidirectional motor control
  • Low quiescent current (1.7mA) and shutdown current (10nA)
  • Output short-circuit and thermal protection
  • 1.8V compatible enable pin

Applications

  • Mobile phone haptic feedback
  • Portable electronics vibration alert
  • Wearable device tactile feedback
  • Gaming controller rumble motor
  • Touchscreen haptic response
Product Introduction: DRV8601DRBR Product Introduction

The DRV8601DRBR from Texas Instruments is a single-supply haptic driver optimized for driving ERM (Eccentric Rotating Mass) DC motors and LRA (Linear Resonant Actuators) using a single-ended PWM input. With 400mA output capability and 100us fast turn-on time, it provides responsive haptic feedback for mobile phones and portable electronics. The differential output drive enables quick motor reversal for rapid stopping. The device features 1.7mA quiescent current and 10nA shutdown current for minimal battery drain.

Working Principle: DRV8601DRBR Working Principle

The DRV8601 uses a differential output driver stage with power MOSFETs in an H-bridge-like configuration. The PWM input signal controls the output drive level and direction. For ERM operation, the differential output applies voltage across the motor terminals in one direction for forward rotation and reverses polarity for quick braking. For LRA operation, the device drives the actuator at its resonant frequency. The enable pin (1.8V compatible) controls device power states. Internal thermal shutdown and output short-circuit protection safeguard the device during fault conditions.

Pin Description: DRV8601DRBR Pin Definition and Functions
Pin Name Type Function
1 OUT+ Output Positive differential output
2 VDD Power Supply voltage (2.5-5.5V)
3 EN Control Enable (active high, 1.8V compatible)
4 PWM Input PWM / analog input signal
5 GND Power Ground
6 IN Input Reference input
7 OUT- Output Negative differential output
8 PGND Power Power ground
Pad EP Thermal Exposed thermal pad (connect to GND)
Application Scenarios: In which products and applications is DRV8601DRBR used
  • Mobile phone and smartphone vibration motor driver
  • Wearable device haptic feedback actuators
  • Gaming controller and joystick rumble motors
  • Tablet and touchscreen tactile response
  • Medical device patient alert vibration
Alternative Models: What chips are recommended as replacements for DRV8601DRBR
Manufacturer Part Number Package Notes
Texas Instruments DRV2605L WQFN-10 Advanced haptic driver with library
onsemi LC898302 WLCSP-16 ERM/LRA driver
ADI ADP1051 LFCSP Haptic driver alternative
Texas Instruments DRV8601DRBT VSON-8 Cut tape version

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1