Opens in a new tab

EPM7128SQI100-10N

MAX 7000S CPLD, 128 macrocells, 84 I/O, 10ns delay, 100-PQFP, 5V ISP via JTAG

5916

Effective Inventory

Image for reference only

Manufacturer Part:

EPM7128SQI100-10N

Package:

100-PQFP (14x20mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The EPM7128SQI100-10N from Altera (now Intel) is a high-performance, EEPROM-based Complex Programmable Logic Device (CPLD) belonging to the MAX 7000S family. Featuring 128 macrocells, 84 I/O pins, and 2500 usable gates, it delivers 10ns pin-to-pin propagation delay and in-system programmability (ISP) via a JTAG interface. Housed in a 100-PQFP package, it is designed for a wide range of digital logic applications requiring flexible, reconfigurable logic.

Key Specifications

Family MAX 7000S
Macrocells 128
Usable Gates 2500
I/O Pins 84
Logic Array Blocks 8
Propagation Delay (tpd) 10 ns
Supply Voltage 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C
Package 100-PQFP (14x20mm)
Programmable Type In-System Programmable (ISP)
Part Status Obsolete

Features

  • EEPROM-based CPLD with second-generation MAX architecture
  • 5.0V in-system programmability via IEEE 1149.1 JTAG interface
  • IEEE Std. 1532 ISP compatibility
  • Built-in JTAG boundary-scan test (BST) circuitry
  • Shareable and parallel expander product terms for complex logic
  • Programmable registers: D, T, JK, or SR flip-flop operation
  • Multiple clock modes: global clock, clock enable, and array clock
  • Fast input path with 2.5 ns input setup time

Applications

  • Industrial automation and control systems
  • Communication equipment and networking
  • Test and measurement instruments
  • Aerospace and defense logic integration
  • Glue logic and bus interfacing
Product Introduction: EPM7128SQI100-10N Product Introduction

The EPM7128SQI100-10N is a member of Altera’s MAX 7000S family of high-performance, EEPROM-based Complex Programmable Logic Devices. Based on the second-generation MAX architecture, it offers 128 macrocells organized into 8 Logic Array Blocks (LABs), each containing 16 macrocells. The device provides 2500 usable gates and 84 I/O pins, making it suitable for medium-complexity digital logic implementations. The MAX 7000S architecture supports in-system programmability (ISP) through the built-in IEEE Std. 1149.1 JTAG interface, allowing designers to reprogram the device directly on the PCB without removing it from the system. Each macrocell features a programmable register that can be configured as D, T, JK, or SR flip-flop, with programmable clock control including global clock, clock enable, and product-term clock modes. The device also incorporates shareable and parallel expander product terms to supplement macrocell logic resources for implementing complex functions. With 10ns pin-to-pin propagation delay, the EPM7128SQI100-10N is well-suited for high-speed digital applications.

Working Principle: EPM7128SQI100-10N Working Principle

The EPM7128SQI100-10N operates using a Logic Array Block (LAB) based architecture. Each LAB contains 16 macrocells, a shared logic array with 16 shareable expanders, and a local interconnect. Each macrocell consists of a programmable AND/OR logic array, a configurable register, and I/O control blocks. The Programmable Interconnect Array (PIA) routes signals between LABs and from I/O pins. Product terms from the logic array feed into the macrocell’s register for clocked operations or bypass it for combinatorial functions. The JTAG interface enables ISP by writing configuration data to the on-chip EEPROM, which retains the programming even when power is removed. Expander product terms (shareable and parallel) allow logic functions exceeding the 5 native product terms per macrocell to be implemented without consuming additional macrocells.

Pin Description: EPM7128SQI100-10N Pin Definition and Functions
Pin Name Type Description
1-4 I/O I/O Programmable I/O pins
5 TDI I JTAG Test Data Input
6 TMS I JTAG Test Mode Select
7 TCK I JTAG Test Clock
8 TDO O JTAG Test Data Output
9 GCLK1 I Global Clock 1
10 GCLK2 I Global Clock 2
11 GCLRn I Global Clear (active low)
12 OE1 I Output Enable 1
13 OE2 I Output Enable 2
14-97 I/O I/O Programmable I/O pins (84 total)
98 VCC PWR Power Supply (5V)
99 GND GND Ground
100 VCC PWR Power Supply (5V)
Application Scenarios: In which products and applications is EPM7128SQI100-10N used
  • Industrial Control: Programmable logic for sequence control, I/O expansion, and protocol bridging in PLCs and motor controllers
  • Communications: Glue logic, address decoding, and bus arbitration in networking equipment
  • Test Equipment: Custom test pattern generation, timing control, and data acquisition logic
  • Aerospace: Radiation-tolerant logic replacement and legacy system maintenance where FPGAs are overkill
  • Consumer Electronics: Peripheral interfacing and state machine implementation in embedded systems
Alternative Models: What chips are recommended as replacements for EPM7128SQI100-10N
Model Manufacturer Key Difference
EPM7128STC100-10N Intel/Altera 100-TQFP package variant, same specs
EPM7128SQI100-15N Intel/Altera 15ns delay version (slower, lower cost)
EPM7128AEI100-10 Intel/Altera MAX 7000AE variant, 3.3V operation
EPM7256SQI208-10 Intel/Altera 256 macrocells, 208-PQFP, higher density
XC95108-10PQ100I Xilinx 108 macrocells, 100-PQFP, CoolRunner-II alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1