Opens in a new tab

HX1188FNL

100Base-TX single-port Ethernet transformer, 1CT:1CT, 1.5kV isolation, 350uH OCL, 16-pin SMD

4120

Effective Inventory

Image for reference only

Manufacturer Part:

HX1188FNL

Package:

16-pin SMD Gull Wing (12.7 x 9.09 x 5.99 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The HX1188FNL from Pulse Electronics is a single-port 100Base-TX Ethernet transformer/choke with 1CT:1CT turns ratio, designed for LAN applications. It provides 1.5kV isolation, 350uH open-circuit inductance, and meets IEEE 802.3 specifications in a 16-terminal gull-wing SMD package.

Key Specifications

Manufacturer Pulse Electronics
Transformer Type 100Base-TX Single Port
Turns Ratio 2(1CT:1CT)
Inductance (OCL) 350uH @ 100kHz, 8mA DC bias
Isolation Voltage 1500Vrms (50Hz, 60s)
Insertion Loss 1.0dB max @ 1-100MHz
Return Loss -18dB min @ 5MHz
Crosstalk -62dB min @ 1-100MHz
CMRR -32dB typ @ 100MHz
Number of Ports Single
Package 16-pin SMD Gull Wing
Operating Temperature -40C to +85C

Features

  • Single-port 100Base-TX Ethernet transformer
  • Center-tapped 1:1 turns ratio for TX and RX channels
  • High isolation: 1500Vrms
  • Meets IEEE 802.3 specifications
  • Low insertion loss: 1.0dB max
  • Excellent crosstalk performance: -62dB min
  • Good common-mode rejection: -32dB typical
  • Open frame construction for low profile
  • SMD gull-wing package for automated assembly
  • RoHS-6 compliant

Applications

  • 100Base-TX Ethernet PHY interface
  • LAN on motherboard (LOM) designs
  • Network interface cards (NIC)
  • Embedded Ethernet connectivity
  • Industrial Ethernet systems
Product Introduction: HX1188FNL Product Introduction

The Pulse Electronics HX1188FNL is a single-port 100Base-TX Ethernet transformer/choke designed for Local Area Network (LAN) applications. It provides the necessary impedance matching, signal coupling, and electrical isolation between the Ethernet PHY transceiver and the RJ-45 connector. The device features a center-tapped 1:1 turns ratio for both transmit and receive channels, with 350uH open-circuit inductance measured at 100kHz with 8mA DC bias. The transformer provides 1500Vrms isolation voltage and meets all IEEE 802.3 electrical specifications for 100Base-TX operation. With crosstalk performance of -62dB minimum and common-mode rejection of -32dB typical, it ensures reliable signal integrity in noisy environments. The 16-terminal gull-wing SMD package enables automated pick-and-place assembly.

Working Principle: HX1188FNL Working Principle

The HX1188FNL operates as a signal coupling and isolation transformer for 100Base-TX Ethernet: 1) Impedance Matching: The 1:1 turns ratio transformers match the impedance between the PHY transceiver (100Ohm differential) and the twisted-pair cable (100Ohm characteristic impedance), minimizing signal reflections. 2) Galvanic Isolation: The transformer provides 1500Vrms electrical isolation between the Ethernet controller side and the cable side, protecting equipment from ground loops, common-mode voltages, and transient events per IEEE 802.3 requirements. 3) Common-Mode Rejection: The center-tapped windings allow connection of Bob Smith termination resistors (75Ohm to ground via high-voltage capacitors) that absorb common-mode noise, improving EMI performance. 4) Signal Coupling: The transformer magnetically couples the differential transmit and receive signals between the PHY and the cable, passing the high-frequency data signals while blocking DC and low-frequency common-mode interference.

Pin Description: HX1188FNL Pin Definition and Functions
Pin Name Type Function
1 TD+ Input Transmit positive (PHY side)
2 TCT Center Tap Transmit center tap (PHY side)
3 TD- Input Transmit negative (PHY side)
4-6 NC – No connection
7 RX- Output Receive negative (PHY side)
8 RCT Center Tap Receive center tap (PHY side)
9 RX+ Output Receive positive (PHY side)
10-11 NC – No connection
12 TX+ Output Transmit positive (cable side)
13 TX- Output Transmit negative (cable side)
14 NC – No connection
15 RX+ Input Receive positive (cable side)
16 RX- Input Receive negative (cable side)
Application Scenarios: In which products and applications is HX1188FNL used
  • 100Base-TX Ethernet PHY to RJ-45 interface in embedded systems
  • LAN on motherboard (LOM) designs for desktop and server platforms
  • Network interface cards (NIC) for 100Mbps Ethernet
  • Industrial Ethernet equipment requiring galvanic isolation
  • Set-top boxes and IoT gateways with Ethernet connectivity
Alternative Models: What chips are recommended as replacements for HX1188FNL
Manufacturer Part Number Package Notes
Pulse HX1188FNLT 16-pin SMD Tape and reel version
Pulse HX1188NL 16-pin SMD Narrow body version (7.11mm width)
TDK ACT45R-101-2P-TL003 SMD 100Base-TX transformer
Belfuse 0826-1G1T-33-F SMD Single port 10/100 transformer
YCL RH3129E SMD 100Base-TX compatible

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1