The ITR8307/F43 is a reflective photo interrupter from Everlight in 4-DIP package. Combines a GaAs IR LED (940nm, 1.2V Vf @20mA) and NPN silicon phototransistor mounted side-by-side. Sensing distance: approximately 1mm. BVCEO: 30V, max Ic: 50mA, max If: 50mA. Rise/fall time: 20us typical. Dark current: less than 1uA. Operating temperature: -25C to +85C. Black housing rejects visible light. Pins: 1=CATHODE, 2=ANODE, 3=COLLECTOR, 4=EMITTER. Through-hole mounting. 160 pcs/tube. Pb-free, RoHS compliant. Ideal for paper detection, position sensing, and non-contact object detection.
Home » Integrated Circuits ICs, Optocouplers / Photocouplers » ITR8307/F43
ITR8307/F43
Reflective photo interrupter, GaAs IR LED + NPN phototransistor, 940nm, 4-DIP, 1mm sensing distance
Effective Inventory
Manufacturer Part:
ITR8307/F43
Package:
4-DIP (4.0 x 3.2 x 2.7 mm)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: ITR8307/F43 Product Introduction
The ITR8307/F43 is a reflective-type photo interrupter (optical sensor) manufactured by Everlight Electronics, combining a GaAs infrared emitting diode (IR LED) and an NPN silicon phototransistor in a compact 4-pin DIP through-hole package. Both elements are mounted side-by-side on converging optical axes within a black thermoplastic housing that blocks visible light.
The IR LED emits at a peak wavelength of 940 nm with a typical forward voltage of 1.2V at 20 mA. The phototransistor detects infrared radiation reflected from a surface placed within the sensing range of approximately 1 mm. The minimum collector current (Ic_ON) is 0.1 mA at VCE=5V and IF=20mA with a reflective surface at 1 mm distance.
Key specifications include: collector-emitter breakdown voltage (BVCEO) 30V, emitter-collector breakdown voltage (BVECO) 5V, maximum collector current 50 mA, maximum forward current 50 mA, peak forward current 1A (tw=100us, T=10ms), and maximum collector power dissipation 100 mW. The rise and fall times are typically 20 us each at VCE=2V, Ic=10mA, RL=100 ohm.
The device operates over a temperature range of -25C to +85C with storage from -30C to +90C. The dark current (ICEO) is typically less than 1 uA at VCE=10V. The cut-off visible wavelength feature reduces false triggering from ambient light sources.
The 4-DIP package provides through-hole mounting with pins arranged as: Pin 1 = CATHODE (IR LED), Pin 2 = ANODE (IR LED), Pin 3 = COLLECTOR (phototransistor), Pin 4 = EMITTER (phototransistor). The standard packaging is 160 pieces per tube.
Common applications include non-contact object detection, paper sensing in printers and copiers, position sensing in cameras and VCRs, and various microcomputer-controlled equipment. The reflective sensing principle eliminates the need for a separate transmitter-receiver alignment across a slot, making it easier to mount on the same side of a surface.
Working Principle: ITR8307/F43 Working Principle
The ITR8307/F43 operates as a reflective optical sensor, detecting the presence or absence of an object by measuring infrared light reflected from a nearby surface.
Infrared Emission: The GaAs IR LED (pins 1-2) is driven by a forward current (typically 5-20 mA) and emits infrared radiation at a peak wavelength of 940 nm. The LED is forward-biased by connecting the anode (pin 2) to a positive supply through a current-limiting resistor, and the cathode (pin 1) to ground. The emitted IR beam is directed outward from the package at a controlled angle determined by the internal lens geometry.
Reflective Detection: When an object or reflective surface is placed within the sensing distance (approximately 1 mm) in front of the sensor, a portion of the emitted IR light reflects off the surface and enters the phototransistor (pins 3-4). The NPN silicon phototransistor collects this reflected IR radiation and generates a photocurrent proportional to the received light intensity. The phototransistor is connected in a common-emitter configuration: the collector (pin 3) is pulled up to VCC through a load resistor, and the emitter (pin 4) is connected to ground. When IR light is received, the phototransistor conducts, causing the collector voltage to drop (logic LOW). When no object is present or the surface is non-reflective, the phototransistor is off (dark current only), and the collector voltage remains HIGH.
Output Signal: The output is an analog signal from the phototransistor collector. The collector current depends on the reflectivity of the target surface, the distance to the surface, and the LED forward current. For digital applications, a comparator or Schmitt trigger can be added to produce a clean digital output. The typical rise and fall times of 20 us make the device suitable for relatively slow-speed detection applications.
Visible Light Rejection: The black thermoplastic housing and the silicon phototransistor spectral response (peaked near 940 nm) provide inherent rejection of visible light, reducing false triggering from ambient lighting. However, direct exposure to strong sunlight or bright indoor lighting may still cause interference.
Design Considerations: The LED should be driven with a constant current (typically 20 mA) for consistent performance. The load resistor on the collector determines the output voltage swing and the switching speed — lower resistance gives faster switching but lower output voltage swing. A typical application circuit uses VCC=5V, IF=20mA, and RL=10 kohm for the collector load.
Pin Description: ITR8307/F43 Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | CATHODE | Input (IR LED) | IR LED cathode; connect to ground through current-limiting resistor or directly; LED forward voltage typically 1.2V at 20 mA |
| 2 | ANODE | Input (IR LED) | IR LED anode; connect to positive supply through current-limiting resistor; maximum continuous forward current 50 mA |
| 3 | COLLECTOR | Output (Phototransistor) | Phototransistor collector; pull up to VCC through load resistor; output voltage drops when reflective object detected; max BVCEO 30V; max Ic 50 mA |
| 4 | EMITTER | Ground (Phototransistor) | Phototransistor emitter; connect to ground; dark current less than 1 uA; BVECO 5V |
Application Scenarios: In which products and applications is ITR8307/F43 used
| Application | Description |
|---|---|
| Paper Detection in Printers/Copiers | Detects presence of paper at feed rollers; reflective principle senses white paper against dark background; non-contact switching prevents paper jams; 1mm sensing distance matches typical paper-path clearance |
| Position/End-Stop Sensing | Detects moving parts reaching home position; reflective mark or tab on mechanism triggers sensor; used in cameras, VCRs, and floppy disk drives |
| Object Presence Detection | General-purpose non-contact object detection in microcomputer-controlled equipment; detects presence of opaque or reflective objects without physical contact |
| Rotational Speed Measurement | Reflective mark on rotating shaft detected per revolution; phototransistor output pulse train proportional to RPM; combined with counter for tachometer applications |
| Edge Detection | Detects edge of tape, label, or strip material; transition from reflective to non-reflective surface changes output state; used in cassette recorders and label applicators |
Alternative Models: What chips are recommended as replacements for ITR8307/F43
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| TCRT5000 | Vishay | Functionally Similar | Reflective optical sensor; similar IR LED + phototransistor; different package (PCB-mount); wider sensing distance (up to 2mm); higher collector current |
| ITR8307/TR8 | Everlight | Functionally Similar | Same sensor family; SMD (SMD-4) package variant instead of DIP; different mounting style; same optical characteristics |
| GP1A57HRJ00F | Sharp | Functionally Similar | Reflective photointerrupter; similar 4-pin DIP; different optical characteristics; check sensing distance and current specs for compatibility |
| ITR9608 | Everlight | Functionally Different | Transmissive (slot) type photointerrupter; object breaks beam between emitter and receiver; not reflective type; different sensing principle |
| LTH-309A | Lite-On | Functionally Similar | Reflective optical sensor; similar 4-pin DIP package; similar sensing distance; check electrical and optical compatibility for drop-in replacement |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







