Opens in a new tab

LM2675MX-5.0/NOPB

1A SIMPLE SWITCHER buck regulator, 5.0V fixed, 8-40V input, 260kHz, 96% eff, SOIC-8

7430

Effective Inventory

Image for reference only

Manufacturer Part:

LM2675MX-5.0/NOPB

Package:

8-SOIC (4.9 x 6.0 x 1.75mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM2675MX-5.0/NOPB from Texas Instruments is a SIMPLE SWITCHER 6.5V-to-40V, 1A step-down buck voltage regulator with fixed 5.0V output. It features 260kHz switching frequency, up to 96% efficiency, only 5 external components required, and TTL shutdown capability in an 8-pin SOIC package.

Key Specifications

Manufacturer Texas Instruments
Topology Buck (Step-Down)
Output Voltage 5.0V (fixed)
Output Current 1A
Input Voltage Range 8V to 40V
Switching Frequency 260kHz
Efficiency Up to 96%
Quiescent Current 2.5mA typical
Standby Current 50uA typical
Output Voltage Tolerance +-1.5% max
Package 8-SOIC (4.9 x 6.0mm)
Operating Temperature -40C to +125C

Features

  • Efficiency up to 96%
  • Only 5 external components required
  • Fixed 5.0V output with +-1.5% tolerance
  • 260kHz fixed frequency internal oscillator
  • 0.25Ohm DMOS output switch
  • TTL shutdown capability, low-power standby mode
  • Thermal shutdown and current limit protection
  • Uses readily available standard inductors

Applications

  • Simple high-efficiency step-down regulators
  • Efficient pre-regulator for linear regulators
  • Positive-to-negative converters
  • Battery-powered equipment
  • Embedded system power supplies
Product Introduction: LM2675MX-5.0/NOPB Product Introduction

The Texas Instruments LM2675MX-5.0/NOPB is a SIMPLE SWITCHER step-down voltage regulator built with LMDMOS process technology. It provides all active functions for a 1A buck switching regulator with fixed 5.0V output. The device requires only five external components and features patented internal frequency compensation and a fixed 260kHz oscillator. The high efficiency exceeding 90% means PCB copper traces provide sufficient heat sinking. Standard inductors from multiple manufacturers are compatible, greatly simplifying design. The device includes +-1.5% output voltage tolerance, external shutdown with 50uA standby current, and current limiting with thermal shutdown protection.

Working Principle: LM2675MX-5.0/NOPB Working Principle

The LM2675MX-5.0/NOPB operates as a fixed-frequency buck converter with three key subsystems: 1) Oscillator and Control: The 260kHz internal oscillator sets the switching frequency. Voltage-mode control with patented internal compensation maintains output regulation. The duty cycle adjusts to maintain 5.0V output across input voltage and load variations. 2) Power Stage: The internal 0.25Ohm DMOS output switch alternately connects and disconnects the input voltage to the output inductor. When on, energy is stored in the inductor; when off, the catch diode provides a current path, transferring stored energy to the output capacitor and load. 3) Protection: Cycle-by-cycle current limiting prevents switch damage. Thermal shutdown disables the output when junction temperature exceeds the safe limit. The ON/OFF pin allows TTL-level shutdown with 50uA standby current.

Pin Description: LM2675MX-5.0/NOPB Pin Definition and Functions
Pin Name Type Function
1 ON/OFF Input Shutdown control (TTL level, active low)
2 VIN Power Input supply voltage (8V to 40V)
3 GND Ground Ground connection
4 FB Input Feedback (connect to output for 5V fixed)
5 GND Ground Ground connection
6 GND Ground Ground connection
7 GND Ground Ground connection
8 VSW Output Switch output (connect to inductor)
Application Scenarios: In which products and applications is LM2675MX-5.0/NOPB used
  • 5V power supply from 12V or 24V industrial bus
  • Efficient pre-regulator before low-noise linear regulators
  • Battery-powered equipment requiring 5V from 9V-24V sources
  • Embedded system point-of-load regulation
Alternative Models: What chips are recommended as replacements for LM2675MX-5.0/NOPB
Manufacturer Part Number Package Notes
TI LM2675MX-3.3/NOPB SOIC-8 3.3V version, same series
TI LM2675MX-12/NOPB SOIC-8 12V version, same series
TI LM2675MX-ADJ/NOPB SOIC-8 Adjustable version
TI LMR16030PDDAR HSOIC-8 60V, 3A, newer alternative
Monolithic Power MP1484DS SOIC-8 4.5-18V, 2A buck

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1