The LM324ADR from Texas Instruments is a quad 30-V 1.2-MHz operational amplifier in a 14-pin SOIC package with tape-and-reel packaging. It contains four independent high-gain internally compensated op-amps designed for single-supply operation from 3 V to 30 V. Key specs include 1.2-MHz gain bandwidth product, 0.5-V/µs slew rate, 3-mV max input offset voltage (A-grade), 0.175-mA per-channel quiescent current, and 100-dB voltage gain. The input common-mode range includes ground and the output swings from near 0 V to VCC-1.5 V. Operating temperature range is 0°C to +70°C. The ‘A’ suffix denotes improved offset specification; ‘DR’ denotes SOIC-14 tape-and-reel.
Home » Analog Linear ICs, Integrated Circuits ICs » LM324ADR
LM324ADR
Quad op-amp A-grade, 3-30V single supply, 1.2MHz GBW, 3mV Vos, 100dB gain, SOIC-14 T&R, 0~70°C
Effective Inventory
Manufacturer Part:
LM324ADR
Package:
SOIC-14 (D) (8.65 x 3.9 x 1.5 mm, 1.27mm pitch)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: LM324ADR Product Introduction
The LM324ADR from TI is the A-grade, SOIC-14 tape-and-reel version of the industry-standard LM324 quad operational amplifier. The A-grade improves the maximum input offset voltage from 7 mV (standard LM324) to 3 mV, providing better DC precision for measurement and control applications. The device is pin-compatible with all LM324 variants across manufacturers.
The LM324 family is one of the most produced op-amp ICs in history, used in virtually every category of electronics. The four amplifiers share common VCC and GND, with each having independent inputs and outputs. The input common-mode voltage range includes ground, enabling direct single-supply sensing of signals near the negative rail without level shifting.
Note that TI has discontinued the LM324AD (tube package) but continues to offer the LM324ADR (tape-and-reel). TI recommends the LM324B as the next-generation replacement, offering 3-36 V supply range, 3-mV max Vos, integrated EMI filtering, 2-kV HBM ESD protection, and -40°C to +125°C temperature range.
The LM324ADR is electrically identical to the LM324ADT from ST and the LM324ADR2G from onsemi. All three are pin-compatible and interchangeable in most applications. The TI version offers 1.2-MHz GBW vs the ST version’s 1.3-MHz GBW — a negligible difference in practice.
Working Principle: LM324ADR Working Principle
**Bipolar Input Stage:** Each amplifier uses a PNP differential input pair with a current-mirror active load. The PNP inputs enable the common-mode range to include ground and extend -0.3 V below it. Input bias current (45 nA typical) flows out of the input pins.
**Internal Compensation:** Dominant-pole compensation sets unity-gain bandwidth to 1.2 MHz and slew rate to 0.5 V/µs, ensuring stability in voltage-follower configurations without external capacitors.
**Class-AB Output:** The output can source 40 mA (Darlington pull-up) and sink approximately 20 mA at VCC = 15 V. The output cannot swing fully to ground under load due to the asymmetric drive — a pull-down resistor helps reach near-zero volts.
**Single-Supply Architecture:** Internal bias network operates from a single positive supply with no negative supply required, reducing system complexity.
Pin Description: LM324ADR Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | 1OUT | O | Amplifier 1 output; swings 5mV to VCC-1.5V; ±40mA drive |
| 2 | 1IN- | I | Amplifier 1 inverting input; 45nA bias current |
| 3 | 1IN+ | I | Amplifier 1 non-inverting input; CM range includes ground |
| 4 | VCC+ | P | Positive supply; 3V to 30V; bypass with 0.1µF |
| 5 | 2IN+ | I | Amplifier 2 non-inverting input |
| 6 | 2IN- | I | Amplifier 2 inverting input |
| 7 | 2OUT | O | Amplifier 2 output |
| 8 | 3OUT | O | Amplifier 3 output |
| 9 | 3IN- | I | Amplifier 3 inverting input |
| 10 | 3IN+ | I | Amplifier 3 non-inverting input |
| 11 | GND/VCC- | G | Ground / negative supply |
| 12 | 4IN+ | I | Amplifier 4 non-inverting input |
| 13 | 4IN- | I | Amplifier 4 inverting input |
| 14 | 4OUT | O | Amplifier 4 output |
Application Scenarios: In which products and applications is LM324ADR used
| Application | Description |
|---|---|
| Multi-Channel Analog Signal Conditioning | Four op-amps in one package for amplifying multiple sensor channels; 3mV Vos (A-grade) reduces DC error; single 5V or 12V supply; use as non-inverting amplifiers, difference amplifiers, or active filters |
| Window Comparator with Hysteresis | Two op-amps form a window comparator for over/undervoltage detection; third op-amp provides reference voltage; fourth op-amp drives indicator LED; ground-sensing input range eliminates negative supply |
Alternative Models: What chips are recommended as replacements for LM324ADR
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| LM324BIPWR | TI | Recommended Replacement | 3-36V supply; 3mV max Vos; integrated EMI filter; 2kV HBM ESD; -40 to +85°C; TSSOP-14; drop-in upgrade with improved robustness and wider temperature range |
| LM324ADT | ST | Pin-Compatible Equivalent | Same SOIC-14 pinout; ST variant; 1.3MHz GBW; electrically equivalent; use as alternate source |
| LM324ADR2G | onsemi | Pin-Compatible Equivalent | Same SOIC-14 pinout; onsemi variant; 3-32V; 3mV Vos; A-grade; use as alternate source |
| MCP6004T-I/ST | Microchip | Functional Alternative | Quad CMOS op-amp; 1.8-6V; 1MHz GBW; rail-to-rail output; 1pA Ib; SOIC-14; use for low-voltage rail-to-rail applications |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







