The LM324ADT from STMicroelectronics is a quad low-power operational amplifier in a 14-pin SOIC package. It contains four independent high-gain internally compensated op-amps designed for single-supply operation from 3 V to 30 V (or dual supplies ±1.5 V to ±15 V). Key specs include 1.3-MHz gain bandwidth product, 0.4-V/µs slew rate, 2-mV typical input offset voltage, 20-nA input bias current, 100-dB voltage gain, and 70-dB minimum CMRR. The output voltage swings from near ground to VCC-1.5V. Quiescent current is 1.2 mA max for all four amplifiers at 5 V. Operating temperature range is 0°C to +70°C. The ‘A’ suffix denotes improved grade with lower offset voltage (3 mV max vs 7 mV for standard).
Home » Analog Linear ICs, Integrated Circuits ICs » LM324ADT
LM324ADT
Quad op-amp, 3-30V single supply, 1.3MHz GBW, 2mV Vos, 100dB gain, SOIC-14, 0~70°C, improved A-grade
Effective Inventory
Manufacturer Part:
LM324ADT
Package:
SOIC-14 (8.65 x 3.9 x 1.65 mm, 1.27mm pitch)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: LM324ADT Product Introduction
The LM324ADT from STMicroelectronics is the improved ‘A’ grade of the industry-standard LM324 quad operational amplifier. The ‘A’ grade offers tighter input offset voltage (3 mV max vs 7 mV for standard grade), making it suitable for applications requiring better DC precision without paying for premium op-amps. The device is pin-compatible with all LM324/LM224/LM2902 variants across manufacturers.
The LM324 family is one of the most widely used op-amp ICs in the world, valued for its single-supply operation, low cost, and quad-channel integration. All four amplifiers share a common VCC and GND, with each amplifier having independent inputs and outputs. The input common-mode voltage range includes ground (0 V), enabling direct sensing of signals near the negative rail without level shifting — a key advantage over dual-supply op-amps.
The output voltage swings from approximately 5 mV above ground (under light load) to VCC – 1.5 V, providing a usable output range in single-supply applications. The 40-mA typical output current at VCC = 15 V can directly drive LEDs, relays, and low-impedance loads without additional transistors.
The SOIC-14 package provides a compact surface-mount footprint (8.65 x 3.9 mm) for modern PCB designs. The ‘DT’ suffix in the ST part number denotes SOIC-14 tape-and-reel packaging. The low 1.2-mA total quiescent current (all four amplifiers) at 5 V makes the LM324ADT suitable for battery-operated equipment.
Typical applications include transducer amplifiers, DC gain blocks, active filters, comparators, oscillators, and general-purpose signal conditioning in consumer, industrial, and automotive systems. The LM324ADT is not recommended for new designs requiring high precision or high speed; consider TI’s LM324B (3 mV max Vos, EMI filtering, 36-V supply) for upgrades.
Working Principle: LM324ADT Working Principle
**Bipolar Input Stage:** Each of the four amplifiers in the LM324 uses a PNP differential input pair with a current-mirror active load. The PNP inputs enable the common-mode range to extend below ground by approximately -0.3 V, a critical feature for single-supply operation. The input bias current (20 nA typical) flows out of the input pins (PNP base current), which must be considered when designing high-impedance input networks.
**Gain and Compensation:** The high 100-dB open-loop gain is achieved through two voltage-gain stages. Internal dominant-pole compensation (typically 5-10 pF) sets the unity-gain bandwidth to 1.3 MHz and ensures stability in unity-gain voltage-follower configurations without external capacitors.
**Class-AB Output Stage:** The output stage uses a class-AB push-pull configuration that can both source and sink current. However, the sink current capability (typically 12-50 µA at low VOUT) is much weaker than the source capability, resulting in asymmetrical output drive. This is why the LM324 output cannot truly swing to ground under load — a pull-down resistor is needed for low-voltage outputs.
**Single-Supply Architecture:** The internal bias network is designed to operate from a single positive supply with no negative supply required. The ground pin (VCC-) serves as the reference for all internal bias currents and the output stage. This eliminates the need for a negative supply rail, reducing system complexity and cost.
Pin Description: LM324ADT Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | 1OUT | O | Amplifier 1 output; swings 5mV to VCC-1.5V; ±40mA source/sink capability |
| 2 | 1IN- | I | Amplifier 1 inverting input; 20nA bias current flows out of pin |
| 3 | 1IN+ | I | Amplifier 1 non-inverting input; common-mode range includes ground |
| 4 | VCC+ | P | Positive supply; 3V to 30V; bypass with 0.1µF ceramic |
| 5 | 2IN+ | I | Amplifier 2 non-inverting input |
| 6 | 2IN- | I | Amplifier 2 inverting input |
| 7 | 2OUT | O | Amplifier 2 output |
| 8 | 3OUT | O | Amplifier 3 output |
| 9 | 3IN- | I | Amplifier 3 inverting input |
| 10 | 3IN+ | I | Amplifier 3 non-inverting input |
| 11 | GND/VCC- | G | Ground / negative supply; connect to ground for single-supply operation |
| 12 | 4IN+ | I | Amplifier 4 non-inverting input |
| 13 | 4IN- | I | Amplifier 4 inverting input |
| 14 | 4OUT | O | Amplifier 4 output |
Application Scenarios: In which products and applications is LM324ADT used
| Application | Description |
|---|---|
| Multi-Channel Signal Conditioning | Four op-amps in one package for amplifying multiple sensor signals; e.g., 4 thermistor bridges or 4 strain gauge amplifiers; 2mV Vos (A-grade) reduces DC error; single 5V supply simplifies wiring; use as difference amplifiers with external resistors |
| Active Filter Bank | Implement 2-4 active filters (low-pass, high-pass, band-pass) using Sallen-Key or MFB topologies; 1.3MHz GBW supports filters up to ~100kHz; four channels allow cascading or parallel filter paths; 100dB gain enables high-Q designs |
| Comparator + Window Detector | Use op-amps as open-loop comparators for undervoltage/overvoltage detection; two amplifiers form a window comparator; ground-sensing input range simplifies single-supply design; 40mA output drives LEDs or relay coils; add hysteresis with feedback resistors |
Alternative Models: What chips are recommended as replacements for LM324ADT
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| LM324BDR | TI | Pin-Compatible Upgrade | 3-36V supply; 3mV max Vos; 50nA max Ib; integrated EMI filter; 2kV HBM ESD; drop-in upgrade with improved specs and robustness |
| LM2902ADT | ST | Series Variant | Same die as LM324A; -40°C to +105°C extended temperature range; automotive-qualified version; use for automotive and industrial temperature applications |
| MCP6004-I/ST | Microchip | Functional Alternative | Quad op-amp; 1.8-6V supply; 1MHz GBW; CMOS inputs (1pA Ib); rail-to-rail output; SOIC-14; use for low-voltage battery-powered designs below 5V |
| LM324DT | ST | Standard Grade | Same package and pinout; standard (non-A) grade with 7mV max Vos; lower cost; use when DC precision is not critical |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

UCC28740DR
CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7
Brand: TI
Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)
IN STOCK: 4840pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1







