Opens in a new tab

LM393DR

Dual comparator, 2-36V, open-collector output, SOIC-8

15200

Effective Inventory

Image for reference only

Manufacturer Part:

LM393DR

Package:

SOIC-8 (4.9×3.9 mm, 1.27mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LM393DR from Texas Instruments is a dual differential comparator designed to operate from a single supply over a wide voltage range (2V to 36V). It features low input offset voltage, low input bias current, and open-collector outputs that can be connected to voltages up to 36V independent of supply. Packaged in SOIC-8, it is the industry-standard dual comparator for voltage monitoring, threshold detection, and oscillator circuits.

Key Specifications

Channels 2 (dual)
Supply Voltage Range 2V to 36V (single) / ±1V to ±18V (dual)
Input Offset Voltage 2 mV (typical), 5 mV (max)
Input Bias Current 25 nA (typical)
Response Time 1.3 µs (typical, large signal)
Output Type Open-collector (can pull up to 36V)
Output Sink Current 16 mA (typical)
Quiescent Current 0.4 mA (typical, per comparator)
Operating Temperature 0°C to +70°C
Package SOIC-8 (3.9 mm width)

Features

  • Single supply operation from 2V to 36V
  • Open-collector output allows wired-OR and level shifting
  • Input common mode range includes ground
  • Low input offset voltage: 2 mV typical
  • Low input bias current: 25 nA typical
  • Differential input voltage range up to 36V
  • Industry-standard LM393 pinout

Applications

  • Voltage monitoring and threshold detection
  • Battery low-voltage alarm circuits
  • Zero-crossing detection
  • Window comparator and over/under voltage protection
  • Oscillator and timing circuits
Product Introduction: LM393DR Product Introduction

The LM393DR from Texas Instruments is the industry-standard dual differential comparator operating from 2V to 36V single supply. It features low 2 mV input offset voltage, open-collector outputs for wired-OR and level shifting, and input common mode range that includes ground. With 1.3 µs response time and 16 mA output sink capability, it is ideal for voltage monitoring, threshold detection, and oscillator circuits.

Working Principle: LM393DR Working Principle

The LM393DR contains two independent voltage comparators. Each comparator continuously compares the voltages at its inverting and non-inverting inputs. When the non-inverting input exceeds the inverting input, the open-collector output transistor turns off (output goes HIGH via external pull-up). When the inverting input exceeds the non-inverting, the output transistor turns on (output goes LOW). The open-collector output allows the comparator to interface with different voltage domains — the pull-up resistor can be connected to a voltage up to 36V independent of the supply voltage. The 1.3 µs response time enables detection of moderate-frequency signals.

Pin Description: LM393DR Pin Definition and Functions
Pin Name Type Function
1 OUT A Output Comparator A output (open-collector)
2 IN- A Input Comparator A inverting input
3 IN+ A Input Comparator A non-inverting input
4 GND Power Ground / negative supply
5 IN+ B Input Comparator B non-inverting input
6 IN- B Input Comparator B inverting input
7 OUT B Output Comparator B output (open-collector)
8 VCC Power Positive supply (2-36V)
Application Scenarios: In which products and applications is LM393DR used
  • Voltage monitoring and battery low-voltage alarm circuits
  • Zero-crossing detection for AC signal processing
  • Window comparator for over/under voltage protection
  • Oscillator and timing generator circuits
  • Sensor threshold detection with hysteresis feedback
Alternative Models: What chips are recommended as replacements for LM393DR
Manufacturer Part Number Package Notes
TI LM393BIDR SOIC-8 Next-gen, lower offset, faster response
ON Semiconductor LM393DR2G SOIC-8 Direct equivalent from onsemi
STMicroelectronics LM393DT SOIC-8 Direct equivalent from ST
TI LM339DR SOIC-14 Quad version, same comparator design
Microchip MCP6541-I/SN SOIC-8 Push-pull output, CMOS, lower power

Recommend Parts

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F030RCT6

48MHz Cortex-M0 MCU, 256KB Flash, 32KB SRAM, 51 I/O, 16ch 12-bit ADC, 6 USART, LQFP-64

Brand: ST

Package: LQFP-64 (10 x 10 x 1.4mm)

IN STOCK: 3450pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P87C15SBAA

80C51 8-bit MCU, 16KB Flash, 512B RAM, 20MHz, QFP-44 package

Brand: NXP

Package: LQFP-44 / SBAA (10 x 10 x 1.4 mm)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC3S400A-4FTG256C

Spartan-3A FPGA, 400K gates, 90nm, 16x 18×18 multipliers, 256-pin FTBGA, commercial -4 speed grade

Brand: Amd

Package: FTG256 FineLine BGA (17×17 mm)

IN STOCK: 39784pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ34NPBF

N-Channel HEXFET power MOSFET, 60V, 30A, 0.04 Ohm, TO-220

Brand: infineon

Package: TO-220AB (15.5 x 10.67 mm, through-hole)

IN STOCK: 10367pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

Brand: TI

Package: TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

IN STOCK: 15840pcs

Cargo cycle: 3-7 Days

The minimum order is 1