Opens in a new tab

MK64FN1M0VLL12

Kinetis K64 120MHz Cortex-M4F MCU, 1MB Flash, 256KB SRAM, Ethernet, USB OTG, 100-LQFP

12476

Effective Inventory

Image for reference only

Manufacturer Part:

MK64FN1M0VLL12

Package:

100-LQFP (14 x 14 x 1.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MK64FN1M0VLL12 from NXP Semiconductors is a Kinetis K64 family 120MHz Arm Cortex-M4 microcontroller in a 100-LQFP package. It features 1MB Flash, 256KB SRAM, IEEE 1588 Ethernet, crystal-less USB 2.0 OTG, dual 16-bit ADCs, dual 12-bit DACs, and FlexMemory with up to 4KB EEPROM emulation, targeting industrial IoT and motor control applications.

Key Specifications

Core Arm Cortex-M4 with FPU and DSP
Max Frequency 120MHz
Flash Memory 1024KB (1MB)
SRAM 256KB
FlexMemory (EEPROM) 4KB EEPROM + 128KB FlexNVM
Ethernet IEEE 1588 MAC with hardware timestamp
USB 2.0 OTG Full-Speed (crystal-less)
ADC 2x 16-bit, 500ns conversion
DAC 2x 12-bit
Comparators 3x high-speed
UART Up to 6 (one with ISO7816)
SPI / I2C 3x DSPI / 3x I2C
CAN 1x
Timers 4x FlexTimer (20 channels), PIT, CMT
GPIO 66
DMA 16-channel with crossbar switch
Security MPU, CRC, RNG, AES (in select derivatives)
Supply Voltage 1.71V to 3.6V
Package 100-LQFP (14 x 14mm)
Operating Temperature -40°C to +105°C

Features

  • Arm Cortex-M4 core with single-precision FPU and DSP/SIMD instructions
  • 120MHz operation with single-cycle MAC
  • 1MB dual-bank Flash for concurrent code execution and firmware update
  • 256KB SRAM with multiple power gating regions
  • FlexMemory: 4KB EEPROM emulation (>10M cycles) + 128KB FlexNVM
  • IEEE 1588 Ethernet with hardware timestamping for industrial real-time control
  • Crystal-less USB 2.0 OTG with embedded 48MHz oscillator
  • Dual 16-bit ADCs with single/differential mode and programmable delay trigger
  • Dual 12-bit DACs for analog waveform generation
  • Ultra-low-power: <340nA stop, <250μA/MHz run, 4.5μs wake-up
  • MCUXpresso SDK, IDE, and Config Tools support

Applications

  • Industrial IoT gateways and edge nodes
  • Motor drive and motion control systems
  • Smart energy and smart grid devices
  • Medical instrumentation and patient monitoring
  • POS terminals and payment systems
Product Introduction: MK64FN1M0VLL12 Product Introduction

The MK64FN1M0VLL12 from NXP Semiconductors is a high-performance Kinetis K64 family microcontroller based on the Arm Cortex-M4 core with floating-point unit and DSP instructions, running at 120MHz. It integrates 1MB dual-bank Flash, 256KB SRAM, and FlexMemory (4KB EEPROM + 128KB FlexNVM). Key connectivity includes IEEE 1588 Ethernet with hardware timestamping, crystal-less USB 2.0 OTG, 6 UARTs, 3 SPI, 3 I2C, and CAN. Analog peripherals include dual 16-bit ADCs, dual 12-bit DACs, and three high-speed comparators. The device features ultra-low-power modes with stop current below 340nA and 4.5μs wake-up time.

Working Principle: MK64FN1M0VLL12 Working Principle

The MK64FN1M0VLL12 is built around an Arm Cortex-M4F core with a 4-stage pipeline executing Thumb-2 instructions at up to 120MHz. The crossbar switch enables concurrent multi-master bus accesses to Flash, SRAM, and peripherals via a 16-channel DMA controller. The dual-bank Flash architecture allows one bank to execute code while the other is being programmed, enabling firmware-over-the-air updates without halting execution. The FlexMemory controller provides up to 4KB of byte-writeable EEPROM emulation with over 10 million write cycles, plus 128KB of additional FlexNVM. The Ethernet MAC with IEEE 1588 precision time protocol hardware timestamping enables sub-microsecond clock synchronization for industrial real-time networks. The USB 2.0 OTG controller integrates a 48MHz oscillator, eliminating the need for an external crystal.

Pin Description: MK64FN1M0VLL12 Pin Definition and Functions
Pin Name Type Function
1-8 PTE0-PTE7 I/O Port E: SPI, UART, I2C, Ethernet
9-16 PTA0-PTA7 I/O Port A: Ethernet, UART0, JTAG
17-24 PTA8-PTA15 I/O Port A: Ethernet, UART0, I2S
25-32 PTB0-PTB7 I/O Port B: ADC, UART, CAN, FTMs
33-40 PTB8-PTB15 I/O Port B: ADC, SPI, I2C, FTMs
41-48 PTC0-PTC7 I/O Port C: USB, UART, SPI, FTMs
49-56 PTC8-PTC15 I/O Port C: UART, I2S, FTMs
57-64 PTD0-PTD7 I/O Port D: DAC, ADC, SPI, UART
65-72 PTD8-PTD15 I/O Port D: FTMs, I2C, SPI
73-80 VDD/VSS Power Multiple supply/ground pairs
81-88 VDDA/VSSA Power Analog supply and reference
89-96 USB/VREF Power/I/O USB supply, voltage reference
Application Scenarios: In which products and applications is MK64FN1M0VLL12 used
  • Industrial IoT gateways with Ethernet and IEEE 1588 PTP synchronization
  • Motor drive control using dual ADCs, DACs, and FlexTimer PWM
  • Medical patient monitoring devices with USB data transfer
  • Smart energy meters with Ethernet connectivity and real-time control
  • POS terminals requiring dual-bank Flash for secure firmware updates
Alternative Models: What chips are recommended as replacements for MK64FN1M0VLL12
Manufacturer Part Number Package Notes
NXP MK64FN1M0VMD12 MAPBGA-121 BGA package version, same specs
NXP MK64FX512VLL12 LQFP-100 512KB Flash variant
ST STM32F407VET6 LQFP-100 Cortex-M4, 168MHz, Ethernet
TI TM4C1294NCPDT TQFP-128 Cortex-M4F, 120MHz, Ethernet
Microchip SAME70Q21B-AN TQFP-144 Cortex-M7, 300MHz, Ethernet

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1