The MP1484EN-LF-Z from Monolithic Power Systems (MPS) is a 3 A, 18 V, 340 kHz synchronous step-down converter in an 8-pin SOIC package with exposed pad. It integrates 85 mΩ top and bottom MOSFETs, supports 4.75 V to 18 V input, and provides adjustable output from 0.925 V to 20 V. Current-mode control ensures fast transient response and cycle-by-cycle current limit. Features include programmable soft-start, shutdown current below 1 µA, and up to 95% efficiency. The -LF-Z suffix denotes lead-free tape-and-reel packaging. Operating temperature range is -20°C to +85°C.
Home » DC-DC Converters, Integrated Circuits ICs » MP1484EN-LF-Z
MP1484EN-LF-Z
3A sync buck converter, 4.75-18V in, 0.925-20V out, 340kHz, 85mΩ FETs, 95% eff, SOIC-8 EP, NRND
Effective Inventory
Manufacturer Part:
MP1484EN-LF-Z
Package:
SOIC-8 EP (5.0 x 4.0 x 1.5 mm, 1.27mm pitch, exposed pad)
Brand:
Product Categories:
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.
Description
Product Introduction: MP1484EN-LF-Z Product Introduction
The MP1484 from MPS is a monolithic synchronous buck regulator integrating 85 mΩ top and bottom MOSFETs in a thermally enhanced SOIC-8 EP package. The MP1484EN-LF-Z is the lead-free tape-and-reel version. It delivers 3 A continuous output current from a 4.75 V to 18 V input with output adjustable from 0.925 V to 20 V.
The device uses peak current-mode control with internal slope compensation, providing fast line and load transient response, easy loop compensation, and inherent cycle-by-cycle current limiting. The 0.925 V feedback reference voltage with ±2.7% accuracy over temperature allows precision output regulation.
The integrated synchronous rectifier eliminates the external Schottky catch diode, improving efficiency especially at low output voltages. Up to 95% efficiency is achievable at 12 V input, 3.3 V output, 2 A load.
The programmable soft-start (CSS pin) prevents inrush current by slowly ramping the output voltage. The EN pin provides logic-level shutdown with supply current dropping below 1 µA.
The MP1484 is pin-compatible with the MP1482 (2 A version), offering a simple upgrade path for higher current designs.
Important: MPS designates the MP1484 as “Not Recommended for New Designs” (NRND). The recommended replacement is the MP2307DN-LF, which offers similar performance in a smaller package. Designers should verify availability before using the MP1484 in new designs.
Working Principle: MP1484EN-LF-Z Working Principle
**Synchronous Buck Topology:** The MP1484 uses a synchronous buck converter architecture with an integrated high-side NMOS switch and low-side NMOS synchronous rectifier. During the on-time, the high-side switch connects VIN to the inductor, storing energy in the inductor’s magnetic field. During the off-time, the high-side switch opens and the low-side switch turns on, providing a path for inductor current to continue flowing to the output.
**Current-Mode Control:** The inner current loop compares the peak inductor current (sensed through the high-side switch) against the error amplifier output. This provides cycle-by-cycle current limiting and simplifies loop compensation. Internal slope compensation prevents sub-harmonic oscillation at duty cycles above 50%.
**Bootstrap Supply:** The BS pin provides gate drive voltage for the high-side NMOS switch. An external bootstrap capacitor (0.1 µF) between BS and SW is charged during the off-time when SW is near ground, then provides the voltage above SW needed to drive the high-side gate during on-time.
**Soft-Start:** The SS pin sources a current to charge an external capacitor, creating a voltage ramp that limits the error amplifier output during startup, preventing inrush current and output overshoot.
Pin Description: MP1484EN-LF-Z Pin Definition and Functions
| Pin | Name | Type | Description |
|---|---|---|---|
| 1 | BS | P | Bootstrap supply for high-side gate driver; connect 0.1µF ceramic cap from BS to SW; charged during off-time |
| 2 | IN | P | Input supply; 4.75-18V operating; bypass with 4.7µF ceramic to GND; 24V absolute max |
| 3 | SW | O | Switch node; connects to inductor; 85mΩ internal MOSFETs; do not route sensitive traces near this node |
| 4 | GND | G | Ground; connect to PCB ground plane; exposed pad must be soldered to ground plane for thermal performance |
| 5 | FB | I | Feedback input; 0.925V reference; connect resistor divider from VOUT; VOUT = 0.925 x (1 + R1/R2) |
| 6 | COMP | I/O | Compensation; output of transconductance error amplifier; connect series RC from COMP to GND for loop stability |
| 7 | EN | I | Enable; active-high; pull above 2V to enable; pull below 0.4V to shutdown; IQ < 1µA in shutdown; do not float |
| 8 | SS | I | Soft-start; connect external capacitor to GND; larger cap = slower startup; 10nA charge current; leave open for minimum soft-start |
Application Scenarios: In which products and applications is MP1484EN-LF-Z used
| Application | Description |
|---|---|
| 12V to 3.3V/1.8V Point-of-Load | Step down 12V rail to 3.3V or 1.8V for FPGA/ASIC/DSP core and I/O; 3A output; 95% efficiency at 12V→3.3V/2A; synchronous rectifier eliminates Schottky diode |
| 5V to 1.2V Core Supply | Generate low-voltage core supply from 5V rail; 0.925V minimum output; high efficiency at low VOUT due to synchronous rectification; soft-start prevents inrush into large ceramic output caps |
Alternative Models: What chips are recommended as replacements for MP1484EN-LF-Z
| Model | Manufacturer | Compatibility | Key Difference |
|---|---|---|---|
| MP2307DN-LF-Z | MPS | Recommended Replacement | 3A sync buck; 4.75-23V input; 340kHz; SOIC-8 EP; active and recommended; use for new designs replacing MP1484 |
| MP1482EN-LF-Z | MPS | Pin-Compatible Downgrade | 2A version; same SOIC-8 EP pinout; same application circuit; use for lower current requirements |
| SY8120ABC | Silergy | Competitive Alternative | 3A sync buck; 4.5-18V; 500kHz; smaller SOT-23-6 package; higher frequency allows smaller inductor |
Recommend Parts

ISL95855HRTZ-T
IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN
Brand: Renesas
Package: 48-TQFN (6×6 mm, exposed pad)
IN STOCK: 2156pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IRFB4019PBF
150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB
Brand: infineon
Package: TO-220AB
IN STOCK: 2409pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MSP430F247TPMR
TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64
Brand: texas-instruments
Package: See datasheet
IN STOCK: 13371pcs
Cargo cycle: 3-7 Days
The minimum order is 1

MMUN2211LT1G
NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch
Brand: Onsemi
Package: SOT-23-3 (TO-236, SC-59)
IN STOCK: 8500pcs
Cargo cycle: 3-7 Days
The minimum order is 1

PIC32MX795F512L-80I/PF
32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial
Brand: MICROCHIP
Package: TQFP-100 (14 x 14 mm)
IN STOCK: 7912pcs
Cargo cycle: 3-7 Days
The minimum order is 1








