Opens in a new tab

NE555P

Precision timer, 4.5-16V, 200mA output, astable/monostable, PDIP-8

11650

Effective Inventory

Image for reference only

Manufacturer Part:

NE555P

Package:

PDIP-8 (9.81×6.35 mm, 2.54mm pitch, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NE555P from Texas Instruments is the industry-standard single precision timer IC. It can be configured in astable (oscillator) or monostable (one-shot) mode, generating time delays from microseconds to hours. Packaged in a PDIP-8 through-hole package, the NE555P operates from 4.5V to 16V and can source or sink up to 200 mA, making it one of the most versatile and widely used analog ICs in electronics.

Key Specifications

Supply Voltage Range 4.5V to 16V
Output Current 200 mA (source or sink)
Timing Range Microseconds to hours
Frequency (Astable) Up to 500 kHz
Initial Timing Accuracy 1% (typical)
Temperature Drift 50 ppm/°C (typical)
Trigger Voltage 1/3 VCC (typical)
Threshold Voltage 2/3 VCC (typical)
Reset Voltage 0.5V (max)
Operating Temperature 0°C to +70°C
Package PDIP-8

Features

  • Astable mode: free-running oscillator with adjustable duty cycle
  • Monostable mode: precision one-shot timer
  • High output current: 200 mA source/sink capability
  • Adjustable duty cycle from near-0% to near-100%
  • Active-low reset pin for timing interruption
  • Internal voltage divider sets 1/3 and 2/3 VCC thresholds
  • Wide supply range: 4.5V to 16V
  • Direct LED, relay, and speaker drive capability

Applications

  • Timer and delay circuits for industrial control
  • Pulse generation and clock sources
  • LED flasher and PWM dimmer circuits
  • Tone generator and alarm circuits
  • Power-up sequencing and watchdog timers
Product Introduction: NE555P Product Introduction

The NE555P from Texas Instruments is the iconic industry-standard precision timer IC. Configurable in astable (oscillator) or monostable (one-shot) mode, it generates accurate time delays from microseconds to hours. With 200 mA output drive capability, 4.5-16V supply range, and easy external component configuration, the NE555P remains one of the most versatile and widely used analog ICs for timing, oscillation, and pulse generation applications.

Working Principle: NE555P Working Principle

The NE555P contains two comparators, an SR flip-flop, a discharge transistor, and a resistive voltage divider (three 5kΩ resistors in series, hence the name). The voltage divider sets the upper comparator threshold at 2/3 VCC and the lower comparator trigger at 1/3 VCC. In monostable mode, a trigger pulse below 1/3 VCC sets the flip-flop, driving the output HIGH and turning off the discharge transistor. The timing capacitor charges through the external resistor until it reaches 2/3 VCC, which resets the flip-flop. In astable mode, the capacitor charges and discharges between 1/3 and 2/3 VCC continuously, producing a free-running oscillation.

Pin Description: NE555P Pin Definition and Functions
Pin Name Type Function
1 GND Power Ground
2 TRIG Input Trigger (active below 1/3 VCC)
3 OUT Output Output (200 mA drive capability)
4 RESET Input Reset (active-low, overrides all other inputs)
5 CTRL I/O Control voltage (bypass with 0.01µF for noise immunity)
6 THRESH Input Threshold (active above 2/3 VCC)
7 DISCH Output Discharge (open collector, connects timing cap to GND)
8 VCC Power Supply voltage (4.5-16V)
Application Scenarios: In which products and applications is NE555P used
  • Monostable timer circuits for delay and pulse-width generation
  • Astable oscillator for clock generation and PWM signals
  • LED flasher circuits with adjustable frequency and duty cycle
  • Tone and alarm generator circuits for audio alerting
  • Power-up delay and watchdog timer in embedded systems
Alternative Models: What chips are recommended as replacements for NE555P
Manufacturer Part Number Package Notes
TI NA555P PDIP-8 Higher temperature range version
TI SA555P PDIP-8 Automotive qualified version
TI LMC555CN PDIP-8 CMOS version, 1.5V-15V, low power
ON Semiconductor NE555P PDIP-8 Direct equivalent from onsemi
TI TLC555CP PDIP-8 CMOS version, 2MHz max, low power

Recommend Parts

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F030RCT6

48MHz Cortex-M0 MCU, 256KB Flash, 32KB SRAM, 51 I/O, 16ch 12-bit ADC, 6 USART, LQFP-64

Brand: ST

Package: LQFP-64 (10 x 10 x 1.4mm)

IN STOCK: 3450pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P87C15SBAA

80C51 8-bit MCU, 16KB Flash, 512B RAM, 20MHz, QFP-44 package

Brand: NXP

Package: LQFP-44 / SBAA (10 x 10 x 1.4 mm)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC3S400A-4FTG256C

Spartan-3A FPGA, 400K gates, 90nm, 16x 18×18 multipliers, 256-pin FTBGA, commercial -4 speed grade

Brand: Amd

Package: FTG256 FineLine BGA (17×17 mm)

IN STOCK: 39784pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ34NPBF

N-Channel HEXFET power MOSFET, 60V, 30A, 0.04 Ohm, TO-220

Brand: infineon

Package: TO-220AB (15.5 x 10.67 mm, through-hole)

IN STOCK: 10367pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

Brand: TI

Package: TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

IN STOCK: 15840pcs

Cargo cycle: 3-7 Days

The minimum order is 1