Opens in a new tab

OPA350UA/2K5

38MHz rail-to-rail CMOS op-amp, 22V/us slew rate, 5nV/sqrt(Hz) noise, single-supply 2.7V-5.5V, SOIC-8

6230

Effective Inventory

Image for reference only

Manufacturer Part:

OPA350UA/2K5

Package:

8-SOIC (3.9 x 4.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OPA350UA/2K5 from Texas Instruments is a high-speed, single-supply, rail-to-rail CMOS operational amplifier in the MicroAmplifier series. With a 38MHz gain-bandwidth product, 22V/us slew rate, and low noise of 5nV/sqrt(Hz), it is optimized for driving ADCs and signal conditioning in low-voltage systems.

Key Specifications

Manufacturer Texas Instruments
Amplifier Type General Purpose, Rail-to-Rail
Number of Channels 1
Gain-Bandwidth Product 38 MHz
Slew Rate 22 V/us
Input Offset Voltage 150uV (typ)
Input Bias Current 0.5pA (typ)
Supply Voltage 2.7V ~ 5.5V
Supply Current 5.2mA (typ)
Package 8-SOIC (3.9 x 4.9mm)
Operating Temperature -40°C ~ 85°C

Features

  • Rail-to-rail input and output
  • High bandwidth: 38MHz GBW
  • High slew rate: 22V/us
  • Low noise: 5nV/sqrt(Hz) at 100kHz
  • Low THD+N: 0.0006%
  • Ultra-low input bias current: 0.5pA
  • Unity-gain stable
  • Output swings within 10mV of rails (10k load)

Applications

  • ADC input drivers
  • Portable and battery-powered instruments
  • Audio signal processing
  • Video processing (75-ohm drive capability)
  • Cell phone PA control loops
  • Medical instrumentation
Product Introduction: OPA350UA/2K5 Product Introduction

The Texas Instruments OPA350UA/2K5 is a high-speed, rail-to-rail CMOS operational amplifier optimized for low-voltage single-supply operation. Part of the MicroAmplifier series, it delivers a 38MHz gain-bandwidth product and 22V/us slew rate while consuming only 5.2mA per amplifier. The rail-to-rail input and output capability allows the amplifier to operate with signals that extend to the power supply rails, making it ideal for driving analog-to-digital converters. The very low input bias current of 0.5pA and low noise of 5nV/sqrt(Hz) ensure precision in high-impedance sensor applications. The device is unity-gain stable and available in tape and reel packaging for automated assembly.

Working Principle: OPA350UA/2K5 Working Principle

The OPA350 operates as a voltage-feedback operational amplifier with three key subsystems: 1) Input Stage: A CMOS differential input pair provides rail-to-rail common-mode voltage range, from 0.1V below the negative rail to 0.1V above the positive rail, with ultra-low bias current of 0.5pA. 2) Gain Stage: The high-gain voltage amplifier stage achieves 122dB open-loop gain (RL=10k), providing excellent DC precision with only 150uV input offset voltage. 3) Output Stage: A rail-to-rail CMOS output stage swings within 10mV of the supply rails with a 10k load and can drive up to 40mA, making it suitable for driving low-impedance loads including 75-ohm video lines.

Pin Description: OPA350UA/2K5 Pin Definition and Functions
Pin Name Type Function
1 NC – No connection (or offset trim on some variants)
2 IN- Input Inverting input
3 IN+ Input Non-inverting input
4 V- Power Negative supply (or GND in single-supply)
5 NC – No connection
6 OUT Output Amplifier output
7 V+ Power Positive supply (2.7V to 5.5V)
8 NC – No connection
Application Scenarios: In which products and applications is OPA350UA/2K5 used
  • High-impedance sensor signal conditioning and ADC driver circuits
  • Portable and battery-powered medical instrumentation
  • Audio signal processing with 0.0006% THD+N
  • Video signal processing with 75-ohm drive capability
  • Cell phone power amplifier control loops
Alternative Models: What chips are recommended as replacements for OPA350UA/2K5
Manufacturer Part Number Package Notes
TI OPA2350UA 8-SOIC Dual channel version
TI OPA4350EA 14-SSOP Quad channel version
TI OPA350NA MSOP-8 Single, MSOP package
Microchip MCP6022-I/SN 8-SOIC 10MHz, RRIO, dual
ADI AD8605ARTZ SOT-23-5 10MHz, RRIO, single

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1