Opens in a new tab

Home » Integrated Circuits ICs » SN74HC595N

SN74HC595N

8-bit shift register with output latch, 3-state outputs, 25MHz, 16-PDIP

7553

Effective Inventory

Image for reference only

Manufacturer Part:

SN74HC595N

Package:

16-PDIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN74HC595N from Texas Instruments is an 8-bit shift register with output latch and 3-state outputs. It converts serial input to 8-bit parallel output using only 3 MCU pins, with daisy-chain capability for unlimited output expansion. Packaged in 16-PDIP.

Key Specifications

Logic Family 74HC (High-Speed CMOS)
Bits 8-bit shift register + 8-bit output latch
Supply Voltage 2V to 6V
Shift Frequency 25MHz (typ at 5V)
Output Current +/-6mA per output (at 5V)
Propagation Delay 20ns (typ at 5V)
Package 16-PDIP
Operating Temperature -40 to +85 C

Features

  • 8-bit serial-in, parallel-out shift register
  • Separate output latch for glitch-free updates
  • 3-state outputs for bus interface
  • Daisy-chain serial output (QH’)
  • Direct clear (SRCLR) for register reset
  • Output enable (OE) for 3-state control

Applications

  • Expanding MCU output pins
  • LED matrix and display driving
  • Serial-to-parallel data conversion
  • Daisy-chained I/O expansion
Product Introduction: SN74HC595N Product Introduction

The SN74HC595N from Texas Instruments is an 8-bit shift register with output latch and 3-state outputs that converts serial data from 3 MCU pins (DATA, SRCLK, RCLK) into 8 parallel outputs. The two-stage architecture (shift register + output latch) allows new data to be shifted in while the current output remains stable, eliminating output glitches during updates. The QH’ serial output enables daisy-chaining multiple 74HC595 devices for unlimited output expansion while using only 3 MCU pins. The 3-state outputs with Output Enable (OE) allow the device to be connected to a shared bus. With 25MHz shift frequency and +/-6mA output drive at 5V, it is the most popular IC for LED matrix driving and GPIO expansion.

Working Principle: SN74HC595N Working Principle

The 74HC595 contains two 8-bit registers: the shift register and the storage register (output latch). Serial data is clocked into the shift register on the rising edge of SRCLK. When RCLK rises, the shift register contents are copied to the storage register, which drives the Q0-Q7 outputs. This two-stage pipeline allows shifting new data without disturbing the current output. The SRCLR pin asynchronously clears the shift register. The OE pin controls the 3-state output buffers: when OE is high, all outputs are high-impedance; when low, the storage register drives the outputs. The QH’ pin outputs the last bit of the shift register, which becomes the first bit of the next daisy-chained device.

Pin Description: SN74HC595N Pin Definition and Functions
Pin Name Function
1 Q1 Parallel output bit 1
2 Q2 Parallel output bit 2
3 Q3 Parallel output bit 3
4 Q4 Parallel output bit 4
5 Q5 Parallel output bit 5
6 Q6 Parallel output bit 6
7 Q7 Parallel output bit 7
8 GND Ground
9 Q7′ Serial output (for daisy chain)
10 SRCLR Shift register clear (active low)
11 SRCLK Shift register clock input
12 RCLK Storage register clock (latch)
13 OE Output enable (active low, 3-state)
14 SER Serial data input
15 Q0 Parallel output bit 0
16 VCC Supply voltage (2-6V)
Application Scenarios: In which products and applications is SN74HC595N used
  • Expanding MCU GPIO from 3 pins to 8+ outputs using daisy-chain shift registers
  • LED matrix and 7-segment display driving with glitch-free latch updates
  • Serial-to-parallel data conversion with 25MHz shift rate and 3-state bus
  • Home automation relay control boards with unlimited channel expansion
Alternative Models: What chips are recommended as replacements for SN74HC595N
Model Manufacturer Key Difference
74HC595D Nexperia SOIC-16 surface mount
74HC165N TI Parallel-in serial-out (reverse direction)
TPIC6B595 TI Power shift register, 50V/150mA, open drain
MAX7219 ADI SPI LED driver with current control

Recommend Parts

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F030RCT6

48MHz Cortex-M0 MCU, 256KB Flash, 32KB SRAM, 51 I/O, 16ch 12-bit ADC, 6 USART, LQFP-64

Brand: ST

Package: LQFP-64 (10 x 10 x 1.4mm)

IN STOCK: 3450pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P87C15SBAA

80C51 8-bit MCU, 16KB Flash, 512B RAM, 20MHz, QFP-44 package

Brand: NXP

Package: LQFP-44 / SBAA (10 x 10 x 1.4 mm)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC3S400A-4FTG256C

Spartan-3A FPGA, 400K gates, 90nm, 16x 18×18 multipliers, 256-pin FTBGA, commercial -4 speed grade

Brand: Amd

Package: FTG256 FineLine BGA (17×17 mm)

IN STOCK: 39784pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ34NPBF

N-Channel HEXFET power MOSFET, 60V, 30A, 0.04 Ohm, TO-220

Brand: infineon

Package: TO-220AB (15.5 x 10.67 mm, through-hole)

IN STOCK: 10367pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

Brand: TI

Package: TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

IN STOCK: 15840pcs

Cargo cycle: 3-7 Days

The minimum order is 1