Opens in a new tab

Home » Integrated Circuits ICs » SN74LVC1G123DCTR

SN74LVC1G123DCTR

Single retriggerable monostable, LVC, SSOP-8

8218

Effective Inventory

Image for reference only

Manufacturer Part:

SN74LVC1G123DCTR

Package:

SSOP-8 (2.0×6.4mm, 0.635mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

SN74LVC1G123DCTR from TI is a single retriggerable monostable multivibrator with direct reset. 1.65-5.5V, output pulse width set by external Rext/Cext. SSOP-8.

Working Principle

Monostable multivibrator generates a precise output pulse of defined width when triggered. Pulse width = 0.45 x Rext x Cext. Retriggerable: new trigger during output pulse extends the pulse. Direct reset (CLR) terminates output pulse immediately. Edge-triggered from A (falling) or B (rising) inputs.

Pin Description

Pin Name Function
1 A Negative-edge trigger
2 B Positive-edge trigger
3 CLR Direct clear (active low)
4 Q Normal output
5 GND Ground
6 nQ Complement output
7 Cext External capacitor
8 Rext/Cext External R/C junction

Applications

  • Pulse generation
  • Debounce circuits
  • Timing delay
  • One-shot triggers

Alternative Models

Mfr Part Notes
TI SN74LVC2G123DCUR Dual version
Nexperia 74LVC1G123GW TSSOP-8 equivalent
Product Introduction: SN74LVC1G123DCTR Product Introduction

SN74LVC1G123DCTR from TI is a single retriggerable monostable multivibrator with direct reset. 1.65-5.5V, output pulse width set by external Rext/Cext. SSOP-8.

Working Principle: SN74LVC1G123DCTR Working Principle

Monostable multivibrator generates a precise output pulse of defined width when triggered. Pulse width = 0.45 x Rext x Cext. Retriggerable: new trigger during output pulse extends the pulse. Direct reset (CLR) terminates output pulse immediately. Edge-triggered from A (falling) or B (rising) inputs.

Pin Description: SN74LVC1G123DCTR Pin Definition and Functions
Pin Name Function
1 A Negative-edge trigger
2 B Positive-edge trigger
3 CLR Direct clear (active low)
4 Q Normal output
5 GND Ground
6 nQ Complement output
7 Cext External capacitor
8 Rext/Cext External R/C junction
Application Scenarios: In which products and applications is SN74LVC1G123DCTR used
  • Pulse generation
  • Debounce circuits
  • Timing delay
  • One-shot triggers
Alternative Models: What chips are recommended as replacements for SN74LVC1G123DCTR
Mfr Part Notes
TI SN74LVC2G123DCUR Dual version
Nexperia 74LVC1G123GW TSSOP-8 equivalent

Recommend Parts

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

STM32F030RCT6

48MHz Cortex-M0 MCU, 256KB Flash, 32KB SRAM, 51 I/O, 16ch 12-bit ADC, 6 USART, LQFP-64

Brand: ST

Package: LQFP-64 (10 x 10 x 1.4mm)

IN STOCK: 3450pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P87C15SBAA

80C51 8-bit MCU, 16KB Flash, 512B RAM, 20MHz, QFP-44 package

Brand: NXP

Package: LQFP-44 / SBAA (10 x 10 x 1.4 mm)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC3S400A-4FTG256C

Spartan-3A FPGA, 400K gates, 90nm, 16x 18×18 multipliers, 256-pin FTBGA, commercial -4 speed grade

Brand: Amd

Package: FTG256 FineLine BGA (17×17 mm)

IN STOCK: 39784pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ34NPBF

N-Channel HEXFET power MOSFET, 60V, 30A, 0.04 Ohm, TO-220

Brand: infineon

Package: TO-220AB (15.5 x 10.67 mm, through-hole)

IN STOCK: 10367pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UA78M15HC

Fixed +15V linear voltage regulator, 500mA output, TO-220 package, thermal/short-circuit protection, Texas Instruments 78M series

Brand: TI

Package: TO-220 (3-lead through-hole, 10.16mm width, tab for heatsinking)

IN STOCK: 15840pcs

Cargo cycle: 3-7 Days

The minimum order is 1